The Flott TS 200 SD P is a professional grinder available from Krollit, official Flott distributor since 2007.
- Wheel dimensions: 200 × 32 × 32 mm
- Rotational speed: 2800 rpm
- Suction connection: Diameter 42 mm
- Machine dimensions: 250 × 470 × 230 mm
- Packaging dimensions: 325 × 540 × 310 mm
- Wheel equipment: 1 coarse grit + 1 fine grit
Who uses the TS 200 SD P and for what
Mechanical workshops and metalworking shops use the TS 200 SD P for grinding and satin finishing stainless steel, aluminum, and alloys, removing burrs and finishing surfaces.
Its place in the Flott range
The Flott TS 200 SD P is part of the Flott grinder range, distributed in Italy by Krollit since 2007. The Flott range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Flott catalog on Krollit or contact customer support for assistance with selection.
Krollit logistics and support
Machine shipping in 5-9 working days (7 days for Southern Italy). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Customer support in Italian available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.
Who is the TS 200 SD P for?
The TS 200 SD P is recommended for the following professional profiles:
-
Mechanical workshops for metal finishing: grinding and satin finishing of stainless steel, aluminum, and alloys.
-
Metalworking shops and production laboratories: burr removal, deburring of cuts, and surface finishing.
Not suitable for: mirror polishing of chrome (dedicated polishing machines with abrasive pastes are needed for final chrome finishes).
Table, dimensions and geometry
| Wheel dimensions |
200 × 32 × 32 mm |
| Machine dimensions |
250 × 470 × 230 mm |
| Packaging dimensions |
325 × 540 × 310 mm |
Other specifications
| Suction connection |
Diameter 42 mm |
| Wheel equipment |
1 coarse grit + 1 fine grit |
| Warranty |
12 months |
| Article codes |
317.762 – 317.774 – 317.777 |
| Machine type |
Double bench grinder |
| Safety level |
High (adjustable screens and guards) |
| Rotational speed |
2800 rpm |
| Motor |
Three-phase 400 V – 1.0 kW (intermittent use 30 min) |
Frequently Asked Questions
What can the TS 200 SD P grind?
Stainless steel, aluminum, metal alloys and (in some models) also wood with appropriate abrasive belts.
A specific belt grit is used for each material: 60-80 for roughing, 120-180 for finishing, 240+ for pre-polishing.
What size abrasive belt does it use?
See "Belt dimensions" in the technical table: typically from 75x2,000 mm to 150x2,500 mm.
Belts are consumable spare parts: Krollit supplies original Bernardo belts in various grit sizes to optimize the finish.
Is the belt speed adjustable?
Professional models offer Vario or multi-step speeds (typically 4-8 steps).
High speeds (>20 m/s) for stainless steel and finishing, low speeds (<10 m/s) for wood and soft materials to prevent burning.
Does it have integrated suction?
Professional models offer a suction connection for grinding dust.
Suction is essential for stainless steel (respirable dust) and for wood (fire risk from sparks). Check the connection diameter for connection to a centralized system.
How much does the machine weigh?
See "Weight" in the technical table: typically 50-200 kg for benchtop and column models.
Column models require floor mounting, while benchtop models are installed on a sturdy bench of adequate size.
