{"product_id":"fresatrice-toupie-t-1300-e-400v","title":"Bernardo T 1300 E Spindle Moulder – 400V, 5.5 kW motor, 5 speeds 1,500-9,000 rpm, table extension and roller","description":"\u003cp\u003eThe Bernardo T 1300 E vertical spindle moulder offers an extended table of 2,500×430\/850 mm with right\/left extensions (600×430 mm each), an extractable support, a 5.5 kW (7.5 HP) 400V motor with star-delta start for continuous use, 5 selectable speeds 1,500\/3,500\/5,500\/7,500\/9,000 rpm with LED display, a Ø 30 mm spindle with 180 mm vertical travel and 130 mm usable length, a max tool diameter of 260 mm (profiling) \/ 335 mm (tenoning) \/ 210 mm (retractable), a table opening of 220 mm, a 125\/100 mm dust extraction port, and a large cast iron structure. Weight 665 kg. Manufactured in Austria, distributed in Italy by Krollit as the official Bernardo distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 5.5 kW (7.5 HP) – 400V with star-delta start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle speeds:\u003c\/strong\u003e 5 selectable: 1,500 \/ 3,500 \/ 5,500 \/ 7,500 \/ 9,000 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable with extensions:\u003c\/strong\u003e 2,500 × 430\/850 mm + 2 extensions 600 × 430 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle:\u003c\/strong\u003e Ø 30 mm, 180 mm travel, 130 mm usable length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tool diameter:\u003c\/strong\u003e 260 mm (profiling) \/ 335 mm (tenoning)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructure:\u003c\/strong\u003e Large cast iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 665 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho uses the T 1300 E and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo T 1300 E is the top-of-the-range vertical spindle moulder in the Bernardo spindle moulder family, sized for professional joinery workshops working on long pieces. The distinctive difference compared to the basic T 1300 is the 'E' (Extended): table with right\/left extensions of 600×430 mm each, infeed roller, extractable support included. Complete configuration for handling door panels, long profiles, window frames without the need for an assistant operator. The 5 speeds from 1,500 to 9,000 rpm with LED display cover any type of work: low speed for large tools (335 mm diameter for tenoning), high speed for precision profiling and finishing. The 5.5 kW motor with star-delta start is sized for intensive continuous use: the progressive start avoids mechanical stress and voltage drops. The Ø 30 mm spindle with 180 mm vertical travel and 130 mm usable length accommodates tools of various geometries, and the 220 mm table opening handles retractable cutters up to Ø 210 mm. In Krollit customers' workshops, it is chosen by professional joinery shops producing windows, doors, and furniture, carpentry workshops working on long pieces, and finishing workshops that require variable speed for different finishes.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe T 1300 E is the top of the Bernardo T Spindle Moulder family. Below it: T 1300 (basic version without extensions and roller, weight 530 kg, table 1,300×850 mm); T 600 R (compact benchtop, weight 196 kg, 2 speeds 3,500\/7,000); T 650 (compact, weight 160 kg, 4 speeds 1,800-9,000); T 500 PR (entry, weight 99 kg, 4 speeds with belt change). The difference between T 1300 and T 1300 E is purely in features: the 'E' includes table extensions, infeed roller, extractable support (over 100 kg more). For workshops that regularly work on pieces over 1.3 m long, the T 1300 E is correctly sized; for standard pieces under 1.3 m, the basic T 1300 is sufficient at a significantly lower cost. The star-delta start of the 5.5 kW motor (present on both T 1300 and T 1300 E) requires adequate flooring and sufficient available power; for workshops with electrical limitations, consider the T 600 R or T 500 PR with smaller motors.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 business days (7 days for the South). At 665 kg, it requires a crane or forklift of adequate capacity. Dimensions 2,600 × 1,080\/1,200 × 1,400 mm: verify access to the workshop considering the table extensions. Interchangeable Ø 30 mm spindles, cutters, guides, and original Bernardo spare parts available from stock with 3-5 business days shipping. Customer support in Italian available.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the T 1300 E for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eNot recommended\u003c\/td\u003e\n\u003ctd\u003eIndustrial machine weighing 665 kg and requiring 400V three-phase power. For advanced hobby use, consider T 600 R or T 500 PR.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfessional joinery for windows\/doors\/furniture\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eThe extended table with extensions and roller handles door panels, window frames, long profiles without an assistant. The 5 speeds cover profiling and tenoning.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFurniture finishing workshop\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eThe 5 speeds with LED display allow quick setup for different finishes. Interchangeable Ø 30 mm spindle for quick change between profiling and tenoning tools.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot recommended for:\u003c\/strong\u003e workshops with pieces under 1.3 m that do not require table extensions (the basic T 1300 is cheaper); workshops without 400V three-phase power (consider T 600 R or T 500 PR with 230V version); spaces under 3 m wide with extended extensions (check overall dimensions 2,600 mm + 600 mm extensions on the side).\u003c\/p\u003e\n\n\u003ch3\u003eTable and extensions\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable dimensions\u003c\/td\u003e\n\u003ctd\u003e2,500 × 430\/850 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRight table extension\u003c\/td\u003e\n\u003ctd\u003e600 × 430 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeft table extension\u003c\/td\u003e\n\u003ctd\u003e600 × 430 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking height\u003c\/td\u003e\n\u003ctd\u003e870 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable opening\u003c\/td\u003e\n\u003ctd\u003e220 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSpindle and tools\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle diameter\u003c\/td\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle vertical travel\u003c\/td\u003e\n\u003ctd\u003e180 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle usable length\u003c\/td\u003e\n\u003ctd\u003e130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax tool Ø for profiling\u003c\/td\u003e\n\u003ctd\u003e260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax tool Ø for tenoning\u003c\/td\u003e\n\u003ctd\u003e335 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax retractable tool Ø\u003c\/td\u003e\n\u003ctd\u003e210 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSpeed\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeed positions\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle speed\u003c\/td\u003e\n\u003ctd\u003e1,500 \/ 3,500 \/ 5,500 \/ 7,500 \/ 9,000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eLED display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e5.5 kW (7.5 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – 50Hz – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStart-up\u003c\/td\u003e\n\u003ctd\u003eAutomatic star-delta\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService\u003c\/td\u003e\n\u003ctd\u003eContinuous (S1 100%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDust extraction\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtraction port\u003c\/td\u003e\n\u003ctd\u003e125 \/ 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e2,600 × 1,080\/1,200 × 1,400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApproximate weight\u003c\/td\u003e\n\u003ctd\u003e665 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame material\u003c\/td\u003e\n\u003ctd\u003eCast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery 2006\/42\/CE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBernardo T 1300 E spindle moulder\u003c\/li\u003e\n\u003cli\u003eFA-02 cutter fence\u003c\/li\u003e\n\u003cli\u003eProtection device and pressure bar\u003c\/li\u003e\n\u003cli\u003eØ 30 mm interchangeable spindle\u003c\/li\u003e\n\u003cli\u003eRight\/left rotation\u003c\/li\u003e\n\u003cli\u003eLED speed indicator\u003c\/li\u003e\n\u003cli\u003eAnalog height indicator\u003c\/li\u003e\n\u003cli\u003eElectric spindle brake\u003c\/li\u003e\n\u003cli\u003eAutomatic star-delta start\u003c\/li\u003e\n\u003cli\u003eFeeder connection\u003c\/li\u003e\n\u003cli\u003eRight and left table extension\u003c\/li\u003e\n\u003cli\u003eExtractable support\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat is the practical difference between T 1300 and T 1300 E?\u003c\/summary\u003e\n\u003cp\u003eThe T 1300 E ('Extended') has right\/left table extensions (600×430 mm each), an infeed roller, and an extractable support included. The basic T 1300 only has the standard 1,300×850 mm table. Same motor, same speeds.\u003c\/p\u003e\n\u003cp\u003eFor pieces under 1.3 m, the basic T 1300 is sufficient at a significantly lower cost. For long pieces (panels, profiles, frames), the 'E' extensions allow work without an assistant operator. The infeed roller further facilitates manual feeding of heavy pieces. The weight difference (665 vs 530 kg) reflects the greater structural features.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat does 'star-delta start' mean?\u003c\/summary\u003e\n\u003cp\u003eIt is a progressive starting system for powerful three-phase motors. When switched on, the motor starts in a 'star' configuration (reduced voltage, partial torque), then automatically switches to 'delta' (full voltage, maximum torque).\u003c\/p\u003e\n\u003cp\u003eWithout star-delta start, a 5.5 kW motor generates high inrush currents that can trip the circuit breaker or cause noticeable voltage drops. The star-delta system limits the inrush current, allowing it to start even with modest nominal power meters. It is an essential feature for industrial motors over 4 kW.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eCan I use different cutters without changing the spindle?\u003c\/summary\u003e\n\u003cp\u003eYes, the Ø 30 mm spindle is the Bernardo standard for most profiling and tenoning cutters. For cutters with a different bore, alternative (interchangeable) spindles or specific adapters are needed.\u003c\/p\u003e\n\u003cp\u003eThe Ø 30 mm spindle is an international standard size for professional vertical spindle moulders. Most commercial cutters (profiling, grooving, shaping) use this diameter. For cutters with a Ø 50 mm bore or other special sizes, interchangeable spindles are available as optional accessories. Changing the spindle typically takes 5-10 minutes.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eAre 5 speeds really necessary?\u003c\/summary\u003e\n\u003cp\u003eYes, for workshops that alternate different operations. Low speeds (1,500-3,500 rpm) for large tools in tenoning; medium speeds (5,500-7,500) for standard profiling; high speed (9,000) for precision finishing.\u003c\/p\u003e\n\u003cp\u003eThe optimal speed depends on the tool diameter and the material. Large tools (250-335 mm) generate excessive peripheral speeds at high rpm, with the risk of breakage. Small tools (50-100 mm) require high peripheral speeds for clean finishing: at low rpm, the cut is coarse. The 5 speeds cover the full spectrum of standard professional applications.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eHow much does the 5.5 kW motor consume in standard production?\u003c\/summary\u003e\n\u003cp\u003eThe 5.5 kW motor in full operation typically consumes 5.5-6 kWh per hour of effective operation. In standard production with a 50-60% duty cycle, the average consumption is 3-4 kWh per hour.\u003c\/p\u003e\n\u003cp\u003eFor workshops with significant electricity costs, it is recommended to organize cycles to minimize standby times with the motor running. The electric spindle brake allows rapid stops between cycles, reducing downtime. Turning off the motor between spaced cycles further reduces average consumption.\u003c\/p\u003e\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50694374097224,"sku":"09-1311","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Fresatrice_verticale_professionale_T_1300_E_con_prolunga_tavola_e_supporto_estraibile.jpg?v=1752220094","url":"https:\/\/www.krollit.com\/products\/milling-machine-toupie-t-1300-e-400v","provider":"Krollit","version":"1.0","type":"link"}