{"product_id":"fresatrice-toupie-t-700-400-v","title":"Bernardo T 700 Router-Spindle Molder for wood – 400V, 700x700 mm table, Ø 30 mm spindle","description":"\u003cp\u003eThe Bernardo T 700 \/ 400V wood shaper features a 700×700 mm grey cast iron table, a dynamically balanced Ø 30 mm spindle, 4 selectable speeds (1,800\/3,000\/6,000\/9,000 rpm) with quick V-belt change, 105 mm vertical spindle travel, Ø 100 mm dust extraction port, 2.2 kW S1 \/ 3.0 kW S6 three-phase 400V motor, and a digital speed display. Weight approx. 157 kg. Made in Austria, distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable size:\u003c\/strong\u003e 700 × 700 mm in grey cast iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle diameter:\u003c\/strong\u003e Ø 30 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle speed:\u003c\/strong\u003e 1,800 \/ 3,000 \/ 6,000 \/ 9,000 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical spindle travel:\u003c\/strong\u003e 105 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tool diameter (profiling):\u003c\/strong\u003e 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2.2 kW S1 \/ 3.0 kW S6 – 400V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 157 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho uses the T 700 and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo T 700 is a professional-grade vertical wood shaper, designed for profiling, routing, grooving, and shaping solid wood and panel pieces. The 700×700 mm grey cast iron table provides lasting stability and flatness; the dynamically balanced Ø 30 mm spindle works without vibration even with profiling tools up to Ø 200 mm. The four selectable speeds (1,800\/3,000\/6,000\/9,000 rpm) cover all applications: low speed for large diameter tools, high speed for small tools and finishing on hardwoods. The digital display provides an immediate reading of the set speed. In Krollit customers' workshops, it is chosen by artisanal carpentry shops, window and door manufacturers, and furniture makers who produce doors, door frames, decorative profiles, and assembly grooves.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eThe T 700 is Bernardo's professional benchtop shaper. Below it in the woodworking range are benchtop vertical shapers with smaller tables, sized for light hobby-craft use. Above it, the range extends to industrial shapers with sliding tables, multiple shafts, and equipment for series profiling. The T 700 is sized for artisanal production: 4 speeds (vs. single-speed hobby shapers), 2.2 kW S1 motor (vs. 1.5 kW for basic models), 700×700 mm table. For those doing regular profiling on doors, windows, or panels, the T 700 is the benchmark machine. For industrial production of windows and doors, consider industrial shapers with sliding tables or dedicated profiling lines.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 working days (7 days to the South). At 157 kg, it requires adequate means for unloading (pallet truck or hoist). Verify access to the workshop before delivery. Original Bernardo spare spindles, collets, profiling tools, and accessories are available from stock with shipping in 3-5 working days. Customer support available in Italian.\u003c\/p\u003e\n\n\u003ch3\u003eWho the T 700 is for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eAdequate\u003c\/td\u003e\n\u003ctd\u003eMachine sized for professional use: for occasional hobby use, it may be oversized. Consider entry-level benchtop shapers for occasional needs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArtisanal carpentry (1-5 employees)\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003e700×700 mm table and 4 speeds cover profiling of doors, frames, and furniture. Ø 30 mm spindle handles professional tools. Three-phase 400V sized for daily use.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWindow\/door production \/ industrial\u003c\/td\u003e\n\u003ctd\u003eAdequate\u003c\/td\u003e\n\u003ctd\u003eFor series production of windows\/doors, consider shapers with sliding tables and dedicated equipment. The T 700 is sized for artisanal production, not for high-volume industrial lines.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e series production of repetitive high-volume profiling (consider shapers with sliding tables or dedicated lines); workshops without a 400V three-phase line; profiling tools over Ø 200 mm (maximum machine capacity).\u003c\/p\u003e\n\n\u003ch3\u003eTable and spindle\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable size\u003c\/td\u003e\n\u003ctd\u003e700 × 700 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable material\u003c\/td\u003e\n\u003ctd\u003eGrey cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking height\u003c\/td\u003e\n\u003ctd\u003e840 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle diameter\u003c\/td\u003e\n\u003ctd\u003eØ 30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical spindle travel\u003c\/td\u003e\n\u003ctd\u003e105 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUseful spindle length\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTool capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax tool diameter (profiling)\u003c\/td\u003e\n\u003ctd\u003eØ 200 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax tool diameter under table\u003c\/td\u003e\n\u003ctd\u003eØ 95 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSpindle speed\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeed 1\u003c\/td\u003e\n\u003ctd\u003e1,800 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeed 2\u003c\/td\u003e\n\u003ctd\u003e3,000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeed 3\u003c\/td\u003e\n\u003ctd\u003e6,000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeed 4\u003c\/td\u003e\n\u003ctd\u003e9,000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeed change\u003c\/td\u003e\n\u003ctd\u003eQuick V-belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S1 (100%)\u003c\/td\u003e\n\u003ctd\u003e2.2 kW (3.0 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption S6 (40%)\u003c\/td\u003e\n\u003ctd\u003e3.0 kW (4.0 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – 50Hz – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust extraction port\u003c\/td\u003e\n\u003ctd\u003eØ 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e930 × 760 × 1,160 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003eapprox. 157 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInterchangeable spindle Ø 30 mm\u003c\/li\u003e\n\u003cli\u003eInterchangeable spindles for end mills Ø 6, 8, 12 mm\u003c\/li\u003e\n\u003cli\u003eCollets Ø 6, 8, 12 mm\u003c\/li\u003e\n\u003cli\u003eSanding sleeve Ø 75 mm grit 100\u003c\/li\u003e\n\u003cli\u003eMiter fence\u003c\/li\u003e\n\u003cli\u003eDigital speed indicator\u003c\/li\u003e\n\u003cli\u003eRotation reversal (right\/left)\u003c\/li\u003e\n\u003cli\u003eProtection device and pressure plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan I use end mills in addition to the Ø 30 mm spindle?\u003c\/summary\u003e\n\u003cp\u003eYes. Interchangeable spindles for end mills Ø 6, 8, 12 mm with corresponding collets are included. They allow the use of standard end mills without purchasing additional equipment.\u003c\/p\u003e\n\u003cp\u003eThe Ø 30 mm spindle is the standard professional size for profiling tools. The interchangeable Ø 6, 8, 12 mm spindles allow the use of end mills typical for wood model making and finishing. Original Bernardo replacement collets are available from stock with shipping in 3-5 working days.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow do I change the spindle speed?\u003c\/summary\u003e\n\u003cp\u003eSpeed change is done via V-belt: open the side cover, move the belt to the desired pulley range, then close. This operation takes a few seconds and no additional tools.\u003c\/p\u003e\n\u003cp\u003eThe belt change system is standard on professional shapers: fast, reliable, and maintainable. The four speeds are pre-set on the pulleys: the operator chooses the correct combination for the tool diameter in use. The digital display confirms the actual speed, eliminating the risk of setting errors.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eIs the spindle dynamically balanced?\u003c\/summary\u003e\n\u003cp\u003eYes, the Ø 30 mm spindle is dynamically balanced at the factory. Combined with the 157 kg grey cast iron structure, it ensures vibration-free machining even with large profiling tools.\u003c\/p\u003e\n\u003cp\u003eDynamic balancing is critical for surface quality and the lifespan of spindle bearings. With large profiling tools (Ø 150-200 mm), an unbalanced spindle produces vibrations that leave marks on the surface and accelerate wear. Bernardo balancing is a constructive feature maintained in the professional range.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eIs rotation reversal really useful?\u003c\/summary\u003e\n\u003cp\u003eYes, significantly. It allows working in the correct direction regardless of the workpiece orientation, eliminating the need to turn the piece to avoid tear-out.\u003c\/p\u003e\n\u003cp\u003eRotation reversal (right\/left) is a feature found only on professional models. On wood with difficult grain or pieces with specific symmetry, the ability to reverse the direction of spindle rotation allows for always working 'with the grain' instead of 'against the grain,' reducing tear-out and improving finish. For the production of wooden windows and doors with complex profiles, this feature is particularly appreciated.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow much operating space is needed?\u003c\/summary\u003e\n\u003cp\u003eThe machine dimensions are 930 × 760 × 1,160 mm. For handling medium to large pieces, an operating area of at least 3 × 2.5 m with access to the front and two sides of the table is needed.\u003c\/p\u003e\n\u003cp\u003eThe 840 mm working height is ergonomic for standing operators. The 700×700 mm table handles standard carpentry-sized pieces; for larger pieces (over 1.5 m long), a lateral roller support is recommended to prevent tipping during routing. Krollit provides compatible roller supports as an optional accessory.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50693028479304,"sku":"09-12630","price":1824.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Toupie_compatta_T_700_per_falegnami.jpg?v=1752163247","url":"https:\/\/www.krollit.com\/products\/milling-machine-toupie-t-700-400-v","provider":"Krollit","version":"1.0","type":"link"}