{"product_id":"fresatrice-toupie-inclinabile-ts-1300-tce-400v","title":"Tilting Spindle Moulder TS 1300 TCE – 400V with Tenoning Carriage and Extension Table","description":"\u003cp\u003eThe Bernardo TS 1300 TCE spindle moulder offers a table 1910 × 430\/850 mm, spindle Ø 30 mm, 5 speeds 1,500\/3,500\/5,500\/7,500\/9,000 rpm, max. tool Ø (profiling) 260 mm \/ (tenoning) 335 mm, 5.5 kW three-phase 400V motor. Manufactured in Austria, distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable size:\u003c\/strong\u003e 1910 × 430\/850 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking height:\u003c\/strong\u003e 870 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle diameter:\u003c\/strong\u003e Ø 30 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle speed (5):\u003c\/strong\u003e 1,500 \/ 3,500 \/ 5,500 \/ 7,500 \/ 9,000 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle height adjustment:\u003c\/strong\u003e 160 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsable spindle length:\u003c\/strong\u003e 110 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. tool Ø (profiling \/ tenoning):\u003c\/strong\u003e 260 \/ 335 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable opening:\u003c\/strong\u003e 220 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtraction outlets:\u003c\/strong\u003e Ø 125 \/ 100 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSliding carriage:\u003c\/strong\u003e 900 × 360 mm (stroke 830 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable extension:\u003c\/strong\u003e 600 × 430 mm right and left\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 5.5 kW – 400 three-phase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho uses the TS 1300 TCE and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo TS 1300 TCE is a high-end professional spindle moulder with 5 speeds (1,500–9,000 rpm) and a 5.5 kW motor: the choice for joineries and window\/door manufacturers who continuously produce complex profiles — mouldings, tenons, grooves, dovetail joints — on solid wood and panels. With a max. tool Ø of 260 mm for profiling and 335 mm for tenoning, it covers a wide range of professional tools. The integrated sliding carriage (900 × 360 mm (stroke 830 mm)) allows precise tenoning without additional equipment. The table extension (600 × 430 mm right and left) expands the support surface for large panels. The TCE adds a 600 mm side extension to the TC: for working on large format panels. In Krollit customers' workshops, it is the benchmark spindle moulder for professional window\/door manufacturers and carpenters.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Bernardo TS 1300 TCE for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHobbyist\u003c\/td\u003e\n\u003ctd\u003eNot recommended\u003c\/td\u003e\n\u003ctd\u003eProfessional 5.5 kW three-phase spindle moulder — oversized and expensive for hobby use.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfessional joinery \/ window\/door manufacturer\u003c\/td\u003e\n\u003ctd\u003eIdeal\u003c\/td\u003e\n\u003ctd\u003e5.5 kW, 5 speeds, Ø 260\/335 mm: for profiling and tenoning in continuous production on any type of wood.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndustrial production\u003c\/td\u003e\n\u003ctd\u003eIdeal\u003c\/td\u003e\n\u003ctd\u003eFor intensive cycles on hardwoods and complex profiles, the 5.5 kW motor's torque ensures continuity without overheating.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTable and spindle\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable size\u003c\/td\u003e\n\u003ctd\u003e1910 × 430\/850 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking height\u003c\/td\u003e\n\u003ctd\u003e870 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle diameter\u003c\/td\u003e\n\u003ctd\u003eØ 30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle speed (5)\u003c\/td\u003e\n\u003ctd\u003e1,500 \/ 3,500 \/ 5,500 \/ 7,500 \/ 9,000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle height adjustment\u003c\/td\u003e\n\u003ctd\u003e160 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUsable spindle length\u003c\/td\u003e\n\u003ctd\u003e110 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. tool Ø (profiling)\u003c\/td\u003e\n\u003ctd\u003e260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. tool Ø (tenoning)\u003c\/td\u003e\n\u003ctd\u003e335 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable opening\u003c\/td\u003e\n\u003ctd\u003e220 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtraction outlets\u003c\/td\u003e\n\u003ctd\u003eØ 125 \/ 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShaft tilt\u003c\/td\u003e\n\u003ctd\u003e−10° to +45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSliding carriage\u003c\/td\u003e\n\u003ctd\u003e900 × 360 mm (stroke 830 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable extension\u003c\/td\u003e\n\u003ctd\u003e600 × 430 mm right and left\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e5.5 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance and safety\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery 2006\/42\/CE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eLogistics\u003c\/h3\u003e\u003cp\u003eBernardo shipping: 5–9 business days (7 days to the South). Original spare parts available with 3–5 business days shipping. Customer support in Italian available.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between the TS series and the T series in the Bernardo spindle moulder range?\u003c\/summary\u003e\n\u003cp\u003eThe T series (T 500, T 700, T 750, T 800 F) has 4 speeds (max 9,000 rpm) and motors up to 2.8 kW, also available in 230V single-phase. The TS series (TS 900 F, TS 1000 F, TS 1300) has 5 speeds (1,500–9,000 rpm), much larger tables (up to 1,910 mm) and 5.5 kW motors, only three-phase 400V: for intense professional production on hardwoods and large format profiling.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhen is the fifth speed of 1,500 rpm needed?\u003c\/summary\u003e\n\u003cp\u003eThe fifth speed of 1,500 rpm (the slowest) is necessary for large diameter cutters (Ø 250–360 mm) used in tenoning: at higher speeds, the peripheral speed would exceed the safety limit allowed for these cutters. Practical rule: maximum peripheral speed = RPM × π × diameter \/ 60,000 \u0026lt; 60–80 m\/s.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between TS 900 F, TS 1000 F and TS 1300?\u003c\/summary\u003e\n\u003cp\u003eTS 900 F: table 900 × 700 mm, carriage 900 × 230 mm, max Ø profiling 180 mm, tenoning 225 mm. TS 1000 F: table 1000 × 800 mm, carriage 1000 × 260 mm, max Ø profiling 250 mm, tenoning 335 mm. TS 1300: table 1310 × 970 mm, no standard carriage, max Ø profiling 260 mm, tenoning 360 mm. The choice depends on the table format and the necessary tenoning carriage.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat dust extractor is needed for the TS series?\u003c\/summary\u003e\n\u003cp\u003eThe TS series has Ø 125 and Ø 100 mm extraction outlets — larger than the T series (only Ø 100 mm). An industrial dust extractor with a minimum airflow of 1,000–1,500 m³\/h is recommended for continuous professional use. Bernardo offers compatible FT and DC dust extractors — contact Krollit for the correct configuration.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre spare parts and assistance available?\u003c\/summary\u003e\n\u003cp\u003eOriginal Bernardo spare parts available with 3–5 business days shipping. Customer support in Italian available.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50694334087496,"sku":"09-1314","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Fresatrice_verticale_TS_1300_TCE_con_carro_tenonatore_e_tavolo_estendibile_400_V.jpg?v=1752248339","url":"https:\/\/www.krollit.com\/products\/milling-machine-toupie-tilting-ts-1300-tce-400v","provider":"Krollit","version":"1.0","type":"link"}