Bernardo high-pressure hydraulic vice PHV 200 is a professional-use vice, weighing 113 kg. Krollit, official Bernardo distributor since 2007.
- A: 700 mm
- B: 280 mm
- C: 200 mm
- d: 240 mm
- E: 163 mm
- F: 63 mm
Who uses the high-pressure hydraulic vice PHV 200 and for what
The high-pressure hydraulic vice PHV 200 is a professional-use vice distributed by Krollit.
Its place in the Bernardo range
The Bernardo high-pressure hydraulic vice PHV 200 is part of the Bernardo vice range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalogue on Krollit or contact customer service for selection support.
Krollit logistics and support
Shipping within 3-5 working days from Krollit warehouse for spare parts and accessories. Customer service in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who is the high-pressure hydraulic vice PHV 200 for
The PHV 200 high-pressure hydraulic vice is recommended for the following professional profiles:
-
Mechanical workshops and milling operators: secure clamping of parts during milling and drilling on machine tools.
-
Production departments with series processing: fast and repeatable clamping for production cycles.
Not suitable for: turning cylindrical parts (lathes require self-centering chucks, not milling vices).
Technical specifications
| A |
700 mm |
| B |
280 mm |
| C |
200 mm |
| d |
240 mm |
| E |
163 mm |
| F |
63 mm |
| G |
100 mm |
| h |
205 mm |
| J |
125 mm |
| K |
400 mm |
| L |
165 mm |
| M |
265 mm |
| P |
830 / 1140 mm |
| Q |
725 / 1035 mm |
| R |
365 mm |
| S |
150 mm |
| T |
300 mm |
| U |
125 mm |
| V |
18 mm |
| W |
18 mm |
| X |
22 mm |
| Y |
14 mm |
| Z |
36 mm |
| Clamping range I |
0 - 110 mm |
| Clamping range II |
100 - 210 mm |
| Clamping range III |
200 - 310 mm |
| Max. clamping force |
6000 kg |
| Approx. weight |
113 kg |
Frequently asked questions
What does the PHV's rotary table do?
The PHV 200 mm has a 360° swivel base with a graduated scale, allowing machining at any horizontal angle without repositioning the workpiece.
The PHV is a high-pressure precision vice, suitable for series production on universal milling machines. The precise rotation allows repeatable angular milling.
What does the 200 mm dimension indicate?
It indicates the jaw width (200 mm), the characteristic dimension of the vice. The clamping width (maximum opening) varies depending on the model: typically 50-105 mm for PS/KV, 105-240 mm for VH/CHV.
To choose the size: as a rule of thumb, the jaw width should be at least 70% of the workpiece size. For workpieces >100 mm, choose 200 mm or larger vices.
Which machine can it be mounted on?
It can be mounted on universal milling machines, bench milling machines, and machining centers with standard DIN T-slot tables.
Check the vice's weight against the table's load capacity. Bernardo vices {series or "PS/KV"} are sized for professional milling machines; smaller bench milling machines require lighter models (PTS 50, PGS 50).
Are the jaws replaceable?
Yes, the jaws are hardened, ground, and fully replaceable. This is a significant advantage for long-term maintenance.
The jaws are the wear point of the vice: after thousands of clamping operations, they may show indentations or deformations. Replacement is autonomous using dedicated fixing screws. Krollit supplies original replacement jaws.
How is precision maintained?
Regular cleaning of guides and jaws, application of a light layer of oil on sliding parts every 50 hours of use, periodic checking of parallelism with a dial indicator.
Chips accumulated in the guides compromise parallelism precision. For intensive use with coolant, dry the vice at the end of the shift to prevent rust on ground parts. Acceptable parallelism tolerance: 0.02-0.05 mm over the length.
