The Bernardo BPK 35 N electric tube bender is a professional sheet metal bending machine, with a 0.75 kW motor, weighing 185 kg. Krollit, official Bernardo distributor since 2007.
- Shaft diameter: 30 mm
- Upper roller diameter: 138 mm
- Lower roller diameter: 137 mm
- Bending speed: 4.5 m/min
- Motor power: 0.75 kW
- Depth: 520 mm
Who uses the BPK 35 N electric tube bender and for what
Metalworking shops and sheet metal workshops use the BPK 35 N electric tube bender for bending sheet metal in the manufacture of cabinets, profiles, and metal casings.
Its place in the Bernardo range
The Bernardo BPK 35 N electric tube bender is part of the Bernardo range of sheet metal bending machines, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.
Krollit logistics and support
Machine shipping in 5-9 working days (7 days for Southern Italy). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Customer support in Italian available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.
Who is the BPK 35 N electric tube bender for?
The bpk 35 n electric tube bender is recommended for the following professional profiles:
-
Metalworking shops and sheet metal workshops: bending sheet metal for manufacturing cabinets, profiles, and casings.
-
Machine and metal container construction: creating 90° bends and various angles on standard sheet metal.
Not suitable for: bending pipes or hollow profiles (machine dedicated to flat sheet metal: specific tube benders are needed for pipes).
Technical specifications
| Shaft diameter |
30 mm |
| Upper roller diameter |
138 mm |
| Lower roller diameter |
137 mm |
| Bending speed |
4.5 m/min |
| Motor power |
0.75 kW |
| Depth |
520 mm |
| Width |
650 mm |
| Height |
1390 mm |
| Weight |
185 kg |
Frequently asked questions
What sheet metal thickness can it bend?
See "Bending capacity" in the technical table: typically up to 3-6 mm on mild steel.
The capacity refers to nominal S235 steel. For stainless steel or high-strength steel, the actual capacity may drop to 60-70% of the stated value.
What working length does it offer?
The bending length is indicated in the technical table (typically 1,000-3,000 mm).
The working length determines the maximum size of the workpiece that can be bent in a single pass. For longer workpieces, larger machines are required.
What bending angles are possible?
Typically from 0° to 135° with a standard V-punch. Check the technical data sheet.
For 90° bends or specific angles, dedicated punches and dies can be used. Krollit supplies original Bernardo bending tools.
Does the machine have CNC control?
Professional models offer CNC control for automatic angle positioning and back gauge.
CNCs reduce setup times in series production and offer repeatability in the finished product.
What power supply does it require?
Hydraulic bending machines require 400 V three-phase power supply; see "Motor power" for the precise data.
Verify the presence of an adequate three-phase line and size the cables according to the nominal power of the hydraulic unit's motor.
