{"product_id":"pialla-a-filo-e-spessore-adm-260-400-v","title":"Bernardo ADM 260 Planer and Thicknesser – 400V","description":"\u003cp\u003eThe Bernardo ADM 260 – 400V jointer-planer offers a planing width of 250 mm, a jointer table of 1,080 mm, a Ø 75 mm cutter block with 3 HSS knives at 3,750 rpm, a maximum thicknessing height of 190 mm, a feed rate of 8 m\/min, and a 2.0 kW three-phase 400V motor. Weight approx. 160 kg. Produced in Austria, distributed in Italy by Krollit as the official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlaning width (jointer):\u003c\/strong\u003e 250 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJointer table (length):\u003c\/strong\u003e 1,080 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknessing height:\u003c\/strong\u003e 5 – 190 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutter block:\u003c\/strong\u003e Ø 75 mm – 3 HSS knives – 3,750 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknesser feed rate:\u003c\/strong\u003e 8 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2.0 kW S1 \/ 2.8 kW S6 – 400V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 160 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the ADM 260 – 400V and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo ADM 260 – 400V is the three-phase version of the ADM 260 family: same construction with cast iron tables, prismatic guide, and thicknessing height up to 190 mm, in a 400V three-phase configuration. The 8 m\/min feed rate, higher than the AD 260 – 400V (4.8 m\/min), makes it more productive for roughing soft and medium woods. With available three-phase, it is preferable to the 230V version for its more uniform motor torque. In Krollit customers' workshops, it is the entry-professional combined planer for joinery shops with a three-phase system seeking a 250 mm width with generous thicknessing height (190 mm) at a low cost.\u003c\/p\u003e\n\u003ch3\u003eADM 260 – 400V vs AD 260 – 400V: what changes\u003c\/h3\u003e\n\u003cp\u003eSame width (250 mm), same motor (2.0 kW), same weight (160 vs 173 kg). The ADM 260 has a higher thicknessing height (190 vs 185 mm), faster feed rate (8 vs 4.8 m\/min), and ADM construction with a prismatic guide. The AD 260 – 400V has a longer jointer table (1,090 vs 1,080 mm). For standard professional use, the ADM 260 – 400V is the better choice for its faster feed rate and greater thicknessing height.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 working days (7 days to the South). Original Bernardo spare parts available from stock with 3-5 working day shipping. Customer support in Italian available.\u003c\/p\u003e\n\u003ch3\u003eWho is the Bernardo ADM 260 – 400V for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eRequires three-phase 400V. For hobby use without three-phase, prefer the 230V version. The 160 kg is manageable with a pallet truck.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmall joinery \/ craftsman (1-5 employees)\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003e250 mm with 190 mm thicknessing height and 8 m\/min feed rate: suitable for professional shifts on soft and medium woods. Three-phase is standard in Italian joineries.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous \/ industrial production\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eFor intensive cycles on hardwoods, consider the ADM 300 – 400V with a 3.0 kW motor. The ADM 260 is dimensioned for shifts up to 6 hours.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e workshops without three-phase 400V (choose ADM 260 – 230V); pieces wider than 250 mm; intensive production on hardwoods for more than 6 hours\/day.\u003c\/p\u003e\n\u003ch3\u003eSurface Planer (Jointer)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlaning width\u003c\/td\u003e\n\u003ctd\u003e250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable length\u003c\/td\u003e\n\u003ctd\u003e1,080 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable height\u003c\/td\u003e\n\u003ctd\u003e920 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutter block – diameter\u003c\/td\u003e\n\u003ctd\u003eØ 75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnives\u003c\/td\u003e\n\u003ctd\u003e3 pcs HSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutter block speed\u003c\/td\u003e\n\u003ctd\u003e3,750 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence\u003c\/td\u003e\n\u003ctd\u003e700 × 145 mm – prismatic guide, inclinable 90°–45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. depth of cut\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eThicknesser\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking width\u003c\/td\u003e\n\u003ctd\u003e250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassage height (min–max)\u003c\/td\u003e\n\u003ctd\u003e5 – 190 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThicknesser table length\u003c\/td\u003e\n\u003ctd\u003e600 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. depth of cut\u003c\/td\u003e\n\u003ctd\u003e1.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed rate\u003c\/td\u003e\n\u003ctd\u003e8 m\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and Power Supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S1 (100%)\u003c\/td\u003e\n\u003ctd\u003e2.0 kW (2.7 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S6 (40%)\u003c\/td\u003e\n\u003ctd\u003e2.8 kW (3.8 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust extraction outlet\u003c\/td\u003e\n\u003ctd\u003eØ 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDimensions and Weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1,100 × 750 × 1,110 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003eapprox. 160 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompliance and Safety\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eStandard Equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 mounted HSS knives\u003c\/li\u003e\n\u003cli\u003eKnife setting jig\u003c\/li\u003e\n\u003cli\u003eSafety push stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between ADM 260 – 400V and ADM 260 – 230V?\u003c\/summary\u003e\n\u003cp\u003eIdentical construction specifications: same width (250 mm), same HSS cutter block, same weight (160 kg), same thicknessing height (190 mm), same feed rate (8 m\/min). The difference is exclusively in the power supply: three-phase 400V vs single-phase 230V. With available three-phase, the 400V version is preferable for more uniform motor torque under load; without three-phase, the 230V is the only viable option.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhy is the 8 m\/min feed rate superior to the AD 260 (4.8 m\/min)?\u003c\/summary\u003e\n\u003cp\u003eThe ADM and AD families have different construction philosophies. The AD family is oriented towards structural stability with a slower but uniform feed rate; the ADM family has a faster feed rate optimized for productivity on soft and medium woods. For hardwoods with the ADM 260, it is advisable to reduce the depth of cut to compensate for the higher speed and maintain surface quality.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs a maximum depth of cut of 1.8 mm sufficient for thicknessing?\u003c\/summary\u003e\n\u003cp\u003eYes, for the vast majority of finishing operations. Finishing passes typically occur at 0.5-1.5 mm, well within the limit. For aggressive roughing, the jointer mode (max 5 mm depth of cut) is more appropriate: roughing is done with the jointer and finishing with the thicknesser, the standard sequence in professional joinery.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow often should the 3 HSS knives be replaced?\u003c\/summary\u003e\n\u003cp\u003eIn professional use (4-6 hours\/day), sharpening is necessary every 2-4 weeks for softwoods, every 1-2 weeks for hardwoods. Original Bernardo replacement knives are available from Krollit stock with 3-5 working day shipping.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much space is needed in the workshop?\u003c\/summary\u003e\n\u003cp\u003eThe machine footprint is 1,100 × 750 × 1,110 mm. For workpiece handling, at least 1.8 m of free space is needed in front and behind. With 160 kg, it can be moved with a manual pallet truck.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50692603707720,"sku":"08-1035","price":1260.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Bernardo_ADM_260_Pialla_a_filo_e_spessore_400_V.jpg?v=1757330237","url":"https:\/\/www.krollit.com\/products\/planer-a-filo-e-spessore-adm-260-400-v","provider":"Krollit","version":"1.0","type":"link"}