{"product_id":"pialla-a-filo-e-spessore-pt-310-400v","title":"Planer and thicknesser Bernardo PT 310 – 400V","description":"\u003cp\u003eThe Bernardo PT 310 planer and thicknesser offers a planing width of 310 mm, a 1,300 mm surface planer table, a Ø 75 mm cutter block with 3 HSS knives rotating at 4,000 rpm, a maximum thicknessing height of 180 mm, a feed rate of 8 m\/min, and a 2.2 kW three-phase 400V motor. Produced in Austria, it is distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlaning width (surface):\u003c\/strong\u003e 310 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface planer table (length):\u003c\/strong\u003e 1,300 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknessing height:\u003c\/strong\u003e 5 – 180 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutter block:\u003c\/strong\u003e Ø 75 mm – 3 HSS knives – 4,000 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknesser feed rate:\u003c\/strong\u003e 8 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2.2 kW S1 \/ 3.0 kW S6 – 400V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 180 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the PT 310 and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo PT 310 – 400V is the 310 mm combination planer\/thicknesser in the compact and lightweight version of the PT range: at 180 kg, it is significantly more manageable than the AD 310 (295 kg) and the ADM 300 (280 kg), though it has a shorter surface planer table (1,300 mm vs 1,500-1,610 mm) and a smaller motor (2.2 kW vs 3.0 kW). It is the choice for those who need 310 mm width but work in tight spaces or need to move the machine, or for those with less intensive planing needs. Its 8 m\/min feed rate, higher than the AD 310 (6 m\/min), makes it more productive for roughing operations on softwoods.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eIn the PT range, the PT 310 is positioned as the 310 mm entry-level model: above the PT 260 (260 mm, 2.2 kW motor) and below the PT 305 D (305 mm, more powerful motor, digital display). The main limitation compared to the AD 310 is the reduced thicknessing height of 180 mm (vs 225 mm): for those who frequently work with pieces between 180 and 225 mm high, the AD 310 is necessary, for everyone else, the PT 310 is sufficient at a lower cost.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 business days (7 days to Southern Italy). Original Bernardo spare parts available from stock with 3-5 business day shipping. Customer support available in Italian.\u003c\/p\u003e\n\u003ch3\u003eWho is the Bernardo PT 310 – 400V for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eRequires three-phase 400V. For hobby use with single-phase outlets, consider 230V versions in the PT range. The 180 kg is manageable with a pallet jack.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmall joinery \/ craftsman (1-5 employees)\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003e310 mm width with compact structure (180 kg, 1,300 × 900 mm footprint). Suitable for workshops with limited space working with pieces up to 180 mm high.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous \/ industrial production\u003c\/td\u003e\n\u003ctd\u003eNot suitable\u003c\/td\u003e\n\u003ctd\u003eThe 2.2 kW S1 motor and 1,300 mm table are not sized for intensive industrial cycles. Consider the AD 310 or ADM 300.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e pieces with a height exceeding 180 mm in thicknessing (consider AD 310 with a pass-through of up to 225 mm); workshops without a three-phase 400V system; intensive production on hardwoods for more than 4 hours\/day.\u003c\/p\u003e\n\u003ch3\u003eSurface Planer\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlaning width\u003c\/td\u003e\n\u003ctd\u003e310 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable length\u003c\/td\u003e\n\u003ctd\u003e1,300 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable height\u003c\/td\u003e\n\u003ctd\u003e990 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutter block – diameter\u003c\/td\u003e\n\u003ctd\u003eØ 75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnives\u003c\/td\u003e\n\u003ctd\u003e3 pcs HSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutter block speed\u003c\/td\u003e\n\u003ctd\u003e4,000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence\u003c\/td\u003e\n\u003ctd\u003e1,110 × 130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence tilt\u003c\/td\u003e\n\u003ctd\u003e90° – 45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. stock removal\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eThicknesser\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking width\u003c\/td\u003e\n\u003ctd\u003e305 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePass-through height (min–max)\u003c\/td\u003e\n\u003ctd\u003e5 – 180 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThicknesser table length\u003c\/td\u003e\n\u003ctd\u003e600 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. stock removal\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed rate\u003c\/td\u003e\n\u003ctd\u003e8 m\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and Power Supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S1 (100%)\u003c\/td\u003e\n\u003ctd\u003e2.2 kW (3.0 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S6 (40%)\u003c\/td\u003e\n\u003ctd\u003e3.0 kW (4.0 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust extraction connection\u003c\/td\u003e\n\u003ctd\u003eØ 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDimensions and Weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1,300 × 900 × 1,180 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003eapprox. 180 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompliance and Safety\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery Directive 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety devices\u003c\/td\u003e\n\u003ctd\u003eON\/OFF switch with undervoltage release, cutter block guard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 mounted HSS knives\u003c\/li\u003e\n\u003cli\u003eKnife setting gauge\u003c\/li\u003e\n\u003cli\u003eSwitch-plug combination\u003c\/li\u003e\n\u003cli\u003ePush stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between PT 310 and AD 310?\u003c\/summary\u003e\n\u003cp\u003eThe PT 310 weighs 180 kg (vs 295 kg for the AD 310), has a shorter surface planer table (1,300 vs 1,610 mm), a smaller motor (2.2 kW vs 3.0 kW), and reduced thicknessing height (180 vs 225 mm). However, the feed rate is faster (8 vs 6 m\/min). The PT 310 is suitable for those seeking 310 mm width in a compact and lightweight format; the AD 310 is superior for intensive use, tall workpieces, and structural stability.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eCan I thickness plane pieces up to 200 mm high?\u003c\/summary\u003e\n\u003cp\u003eNo. The maximum thicknessing height for the PT 310 is 180 mm. For pieces between 180 and 225 mm high, you need to consider the AD 310 (pass-through up to 225 mm) or the ADM 300 (up to 220 mm). For pieces up to 180 mm, the PT 310 is perfectly adequate.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs the 8 m\/min feed rate also suitable for hardwoods?\u003c\/summary\u003e\n\u003cp\u003eOn hardwoods (oak, ash) with an 8 m\/min feed rate, it is advisable to reduce the depth of cut to 1-1.5 mm to avoid tear-out and motor overload. On softwoods (pine, spruce), the full 8 m\/min feed rate with 2-2.5 mm passes is perfectly feasible.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow does the changeover from surface planer to thicknesser work?\u003c\/summary\u003e\n\u003cp\u003eThe surfacing tables open with a hinge to expose the thicknesser bed: the operation takes approximately 30-60 seconds without tools. The dust hood is integrated and automatically adjusts to both modes. It is not necessary to disconnect the dust collector during mode change.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much space does the PT 310 need in the workshop?\u003c\/summary\u003e\n\u003cp\u003eThe machine footprint is 1,300 × 900 × 1,180 mm: among the most compact 310 mm planers available. For moving workpieces, a clear space of at least 2 m in front and behind is needed. At 180 kg, it can be moved with a manual pallet truck on a level floor.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50623948947784,"sku":"08-1041","price":1944.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Pialla_a_filo_e_spessore_Bernardo_PT_310_400V.jpg?v=1757346272","url":"https:\/\/www.krollit.com\/products\/planer-a-filo-e-spessore-pt-310-400v","provider":"Krollit","version":"1.0","type":"link"}