{"product_id":"pialla-a-filo-e-spessore-con-albero-a-spirale-ad-260-s-230v","title":"Bernardo AD 260 S - 230V Planer Thicknesser with Spiral Cutterblock","description":"\u003cp\u003eThe Bernardo AD 260 S – 230V planer-thicknesser offers a planing width of 250 mm, a jointer table of 1,090 mm, a spiral cutterblock Ø 75 mm with 24 TCT inserts at 4,000 rpm, a maximum thicknessing height of 185 mm, a feed rate of 4.8 m\/min, and a 2.0 kW single-phase 230V motor. Noise reduction up to 50% compared to HSS knives. Manufactured in Austria, distributed in Italy by Krollit as the official Bernardo distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlaning width (jointer):\u003c\/strong\u003e 250 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutterblock:\u003c\/strong\u003e spiral Ø 75 mm – 24 TCT inserts – 4,000 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknessing height:\u003c\/strong\u003e 5 – 185 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThicknessing feed rate:\u003c\/strong\u003e 4.8 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2.0 kW S1 \/ 2.8 kW S6 – 230V single-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise reduction:\u003c\/strong\u003e approx. 50% vs HSS knives\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 173 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the AD 260 S – 230V and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo AD 260 S – 230V is the spiral cutterblock version of the AD 260 in a single-phase configuration: it combines the advantages of the TCT cutterblock, reduced noise, up to 20 times longer lifespan, and maintenance through single insert replacement, with the practicality of single-phase 230V power supply, which does not require a three-phase system. In Krollit customer workshops, it is primarily chosen by artisans and carpenters who work in environments where noise levels are a critical factor (shared workshops, residential areas, carpentry schools) or who want to almost completely eliminate knife sharpening from their maintenance routine.\u003c\/p\u003e\n\u003ch3\u003eSpiral cutterblock vs HSS knives: the practical difference\u003c\/h3\u003e\n\u003cp\u003eWith HSS knives, professional use requires sharpening every 1-4 weeks. With the TCT spiral cutterblock, each insert has 4 cutting edges: when one cutting edge wears out, the insert is rotated 90° to expose a fresh cutting edge, a 2-minute operation with an Allen key, without disassembling the cutterblock. Complete replacement of an insert only occurs when all 4 cutting edges are worn out, with a maintenance frequency 10-20 times lower than HSS knives. The 24 inserts always work in a staggered sequence, eliminating the harmonic vibrations that produce the characteristic noise of straight-knife planers.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 business days (7 days to Southern Italy). Original Bernardo spare parts available from stock with 3-5 business day shipping. Customer support available in Italian.\u003c\/p\u003e\n\u003ch3\u003eWho is the Bernardo AD 260 S – 230V for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eSingle-phase 230V, 173 kg, reduced noise: suitable for home workshops with neighbours. Minimum maintenance thanks to reversible TCT inserts.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmall joinery \/ artisan (1-5 employees)\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eFor workshops without a three-phase system that want to eliminate sharpening from their routine. Reduced noise is a tangible advantage in 8 hours of daily work.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous \/ industrial production\u003c\/td\u003e\n\u003ctd\u003eNot recommended\u003c\/td\u003e\n\u003ctd\u003eThe 2.0 kW single-phase motor is not sized for intensive industrial cycles. Consider the AD 260 S – 400V three-phase.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot recommended for:\u003c\/strong\u003e workshops with an existing three-phase system (consider AD 260 S – 400V for higher motor torque); pieces over 250 mm wide; intensive production on hardwoods for more than 4 hours\/day.\u003c\/p\u003e\n\u003ch3\u003eJointer (planer)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlaning width\u003c\/td\u003e\n\u003ctd\u003e250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable length\u003c\/td\u003e\n\u003ctd\u003e1,090 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTable height\u003c\/td\u003e\n\u003ctd\u003e835 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutterblock – diameter\u003c\/td\u003e\n\u003ctd\u003eØ 75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTCT inserts\u003c\/td\u003e\n\u003ctd\u003e24 pcs reversible (4 cutting edges\/insert)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutterblock speed\u003c\/td\u003e\n\u003ctd\u003e4,000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence\u003c\/td\u003e\n\u003ctd\u003e715 × 130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFence tilt\u003c\/td\u003e\n\u003ctd\u003e90° – 45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. depth of cut\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eThicknesser\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking width\u003c\/td\u003e\n\u003ctd\u003e250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassage height (min–max)\u003c\/td\u003e\n\u003ctd\u003e5 – 185 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThicknessing table length\u003c\/td\u003e\n\u003ctd\u003e600 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. depth of cut\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed rate\u003c\/td\u003e\n\u003ctd\u003e4.8 m\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S1 (100%)\u003c\/td\u003e\n\u003ctd\u003e2.0 kW (2.7 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power S6 (40%)\u003c\/td\u003e\n\u003ctd\u003e2.8 kW (3.8 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e230V – single-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust extraction port\u003c\/td\u003e\n\u003ctd\u003eØ 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1,150 × 800 × 1,000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003eapprox. 173 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompliance and safety\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety devices\u003c\/td\u003e\n\u003ctd\u003eON\/OFF switch with undervoltage release, anti-kickback rollers, cutterblock guard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpiral cutterblock with 24 TCT inserts installed\u003c\/li\u003e\n\u003cli\u003e5 spare TCT inserts\u003c\/li\u003e\n\u003cli\u003ePush handle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you replace a worn TCT insert?\u003c\/summary\u003e\n\u003cp\u003eReplacing a TCT insert requires an Allen key (included) and about 2 minutes per insert. There is no need to disassemble the cutterblock or send the machine for service. Procedure: switch off the machine, lock the cutterblock, unscrew the insert screw with the Allen key, rotate the insert 90° to expose the fresh cutting edge (or replace it if all 4 cutting edges are worn), screw it back in, and resume work. The 24 TCT inserts of the AD 260 S each have 4 usable cutting edges before replacement.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes the spiral cutterblock also work on resinous woods like pine?\u003c\/summary\u003e\n\u003cp\u003eYes, and with superior results to HSS knives. The geometry of the spiral TCT inserts produces a smoother surface on resinous woods due to the progressive cutting angle that reduces fiber tear-out. Resin tends to build up on the inserts more quickly than with hardwood: periodic cleaning with a specific solvent (every 2-3 weeks with intensive use) maintains optimal cutting performance.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between AD 260 S – 230V and ADM 260 S – 230V?\u003c\/summary\u003e\n\u003cp\u003eThe AD 260 S – 230V has a cutterblock with 24 TCT inserts and a 1,090 mm jointer table. The ADM 260 S – 230V has a spiral cutterblock with 24 HM inserts, a table with sound-absorbing lips, a prismatic guide, and a thicknessing table guided on a central column, superior construction features that make it more suitable for intensive professional use. The price difference reflects the higher construction level of the ADM.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow often should TCT inserts be replaced?\u003c\/summary\u003e\n\u003cp\u003eEach TCT insert has 4 cutting edges. In professional use on medium woods (4-6 hours\/day), a cutting edge rotation is necessary every 4-8 weeks per insert. Complete insert replacement occurs when all 4 cutting edges are worn out, every 4-8 months in professional use. Compared to HSS knives which require sharpening every 1-4 weeks, maintenance is drastically reduced.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much space is needed in the workshop?\u003c\/summary\u003e\n\u003cp\u003eThe machine footprint is 1,150 × 800 × 1,000 mm. For moving workpieces, a clear space of at least 1.8 m in front and behind is needed. At 173 kg, it can be moved with a manual pallet jack. Delivery is on a standard pallet.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50692573364552,"sku":"08-1053","price":1752.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Bernardo_AD_260_S_Pialla_filo_e_spessore_250_mm_con_albero_a_spirale_400_V.jpg?v=1757520445","url":"https:\/\/www.krollit.com\/products\/planer-a-filo-e-spessore-with-shaft-a-helical-ad-260-s-230v","provider":"Krollit","version":"1.0","type":"link"}