Güde HS-2000 Manual Lever Hoist – 2000 kg, 4.5 mm cable, 2.8 m
The lever hoist does not perform vertical lifting. It is a pulling and tensioning tool, designed for operations where controlled manual force is prioritized over speed. The lever-cam mechanism allows manual effort to be amplified up to 2000 kg with a short stroke (1.3 m with a pulley block).
It differs from chain and gear hoists because it does not lift or lower itself under load: the cable always remains controlled by the operator via the lever mechanism. Perfect for:
- Tensioning fence wires without slippage
- Extracting stuck vehicles with progressive control
- Tensioning cables on construction sites or in fixed installations
- Recovering loads in confined spaces where a chain cannot fit
Who chooses it in Italy
Three specific profiles choose the Güde HS-2000 manual lever hoist:
Farmers and rural managers – In farms with large-area fences, the need to tension wire or netting is recurrent. The manual lever ensures tension control: the cable is not attached once and forgotten, but the effort is adjusted as it is pulled. Low cost, no power needed.
Tyre fitters and repair shops – When a car is stuck or blocked, the lever hoist allows for extraction in gradual increments. Unlike a chain that stops all-or-nothing, here you guide the progression of the pull. Low weight (2.87 kg), transportable in the van along with other tools.
Constructors and repairers of fixed installations – Metal structures, gates. The manual lever is precise and requires no maintenance. No motor, no fluids, no wear from repeated cycles. Long-term reliability in difficult environments (construction sites, installations exposed to humidity).
After-sales support and accessory compatibility
Krollit supplies original Güde spare parts for the HS-2000 model with an average lead time of 5-7 working days:
- Replacement safety hook (with coupling, certified for 2000 kg)
- Replaceable steel cable (2.8 m length, Ø4.5 mm, welded and tested)
- Pulley block (for rope extension with 1:1 ratio)
- Manual in Italian and technical data sheet available in PDF
Who is the HS-2000 manual lever hoist suitable for?
| Profile |
Suitable? |
Reason |
| Advanced hobbyist / garage |
Suitable |
Ideal for extracting stuck vehicles and maintaining structures. Low weight (2.87 kg), easily portable. Low price, no maintenance. |
| Small farm or construction site (1-5 operators) |
Ideal |
2000 kg capacity covers most jobs, and manual lever control reduces damage from excessive tensioning. |
| Continuous industrial or mining production |
Not indicated |
Maximum capacity is 2000 kg and stroke is limited (2.8 m). For repeated cycles and higher loads, choose chain or electric hoists with higher speed. |
Not indicated for: Vertical lifting (the lever hoist is not designed for vertical mounting); repeated work cycles exceeding 20-30 per day (operator fatigue); environments requiring SIL 2+ safety (manual mechanics do not integrate overload sensors).
Technical specifications
Capacity and mechanism
| Maximum pulling capacity |
2000 kg |
| Mechanism type |
Lever-cam with double secure ratchet |
| Single lever stroke |
Not declared by manufacturer |
| Maximum pulling length (without pulley block) |
2.8 m |
| Pulling length (with pulley block) |
1.3 m |
Cable and hook
| Cable material |
Galvanized steel |
| Cable diameter |
4.5 mm |
| Load hook type |
1 safety hook with coupling |
| Hook rotation |
Not declared; fixed screw coupling |
| Hook cert. |
Certified for nominal load 2000 kg |
Locking mechanism
| Locking type |
Double mechanical ratchet with coupling (maintenance-free) |
| Load release |
Manual via lever (no fixed weight) |
| Anti-slippage safety device |
Integrated into the cam mechanism |
Structure and weight
| Body material |
Galvanized steel |
| Finish |
Anti-corrosion galvanization |
| Handle |
Rubberized |
| Pulley block |
Included |
Dimensions and weight
| Length × Depth × Height |
575 × 75 × 220 mm |
| Net weight |
2.87 kg |
| Gross weight (with packaging) |
3.17 kg |
Standard equipment
- HS-2000 lever hoist complete
- Galvanized steel cable Ø4.5 mm, length 2.8 m
- Safety hook with coupling
- Pulley block
- Rubberized handle
- Manual in German
- Technical data sheet
Frequently Asked Questions
What is the difference between a lever hoist and a chain hoist?
The lever hoist pulls and tensions with progressive manual control: the force is amplified by the lever mechanism, not by a reduction system. The chain, on the other hand, winds the load and lifting is continuous once initiated. The lever is for horizontal and controlled pulling; the chain is for rapid vertical lifting.
Specifically:
- HS-2000 lever: max 2000 kg, 2.8 m pull, zero risk of unintentional slippage
- Chain (e.g., GSZ 500/1000): max 500-1000 kg, 6-12 m lift, automatic after initiation
Can I use the HS-2000 hoist to lift a load vertically?
No. The lever hoist is not designed for vertical lifting. The internal structure and components (hook, ratchet) are optimized for horizontal or inclined pulling. For vertical lifting, choose a chain or gear hoist certified for vertical mounting.
If you need to lift 2000 kg vertically, contact Krollit for chain hoist options with equivalent capacity.
How much manual effort is required to pull 2000 kg?
Not declared by the manufacturer. The lever mechanism reduces effort based on the amplification ratio (typically 4:1 or 5:1 in Güde lever hoists). For a 2000 kg load with a 5:1 ratio, the manual effort is approximately 400 kg-force. However, the operator does not have to apply all the effort simultaneously: the lever stroke allows the pull to be distributed over multiple passes.
Is regular maintenance required?
Minimal. The mechanical ratchet is self-locking and requires no lubrication. Recommended:
- Clean the cable after use in dusty environments (to prevent premature wear)
- Inspect the hook every 6 months (for micro-cracks, although rare)
- Check the integrity of the galvanization if exposed to rain or salt spray
No oil changes, no filters. Declared service life over 10 years in normal use.
Is the HS-2000 hoist portable and transportable?
Yes. Net weight 2.87 kg, dimensions 575 × 75 × 220 mm. It fits easily in a construction backpack or the van's tool carrier. Ideal for operators who move between construction sites or farms with large areas.
What is the difference between the HS-2000 model and larger versions (e.g., HS-3000)?
The HS-2000 model is the most common in Italy for its compactness and weight. Larger versions (HS-3000 at 3 tonnes, HS-5000 at 5 tonnes) increase capacity and bulk, while maintaining the identical lever mechanism. For most uses in agriculture, light construction, and workshops, the HS-2000 is sufficient. It gains portability.
How long does the cable last before visible wear?
Not declared by the manufacturer. Made of galvanized steel, the cable has a lifespan of 5-7 years in ordinary use (pulling 5-10 times a month). If exposed to aggressive conditions (salt spray, permanent wetness), replacement is recommended every 3-4 years. Krollit replacement cable available by order.
Is the HS-2000 hoist suitable for tensioning fence wires without damaging them?
Yes, specifically. The lever allows you to dose the tension and stop when the wire reaches the desired tension.
