Bernardo MHB 500 is a car lift for professional use available at Krollit, official Bernardo distributor since 2007.
- Vendor: Bernardo
- Model: MHB 500
- Official Bernardo distributor since 2007
- Shipping from Krollit warehouse
Who uses the MHB 500 and for what
Garages, tire shops and body shops use the MHB 500 for lifting cars during maintenance, repair and underbody overhaul operations in complete safety.
Its place in the Bernardo range
Bernardo MHB 500 is part of the Bernardo car lift range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.
Krollit logistics and support
Machine shipping in 5-9 working days (7 days to the South). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Italian customer support available for technical documentation, product sheets and spare parts order management. Krollit has been an official distributor since 2007.
Who is the MHB 500 for
The MHB 500 is recommended for the following professional profiles:
-
Garages, tire shops and body shops: car lifting for maintenance, repair and overhaul operations.
-
Light carpentry workshops and warehouses: vertical movement of heavy loads on level and anchored flooring.
Not suitable for: vehicles exceeding the declared capacity (for vans, trucks or buses, lifts with a higher capacity (5+ tons) are required).
Frequently asked questions
What is the maximum lifting capacity of the MHB 500?
See "Capacity" in the technical table: typically 2,500 to 6,000 kg for 2-post lifts intended for cars.
For vans and light commercial vehicles, a capacity of 4,000-5,000 kg is needed. For heavy trucks and SUVs, consider 4-post lifts with a capacity of 6,000+ kg.
What lifting height does it reach?
See "Max lifting height" in the technical table: typically 1,800-2,000 mm for 2-post lifts.
The max height allows ergonomic access to the underbody. Check the useful height of the workshop by adding at least 300 mm above the raised vehicle.
Does it require professional installation?
Yes, post lifts require floor anchoring with chemical anchors and installation by qualified personnel.
The floor must be C25/30 concrete with a minimum thickness of 150 mm. Krollit recommends annual periodic inspection by a specialized technician for safety.
What power supply does it require?
Typically 230 V single-phase for basic models (entry-level), 400 V three-phase for professional models.
Motors of 2.2 kW and above require a dedicated three-phase line. Check the availability of the line and the capacity of the differential switch before installation.
Is it compliant with CE regulations?
Yes, Bernardo lifts comply with Machinery Directive 2006/42/CE and have a declaration of conformity.
CE conformity is mandatory for professional use. Keep the documentation and maintenance manual for periodic checks required by Italian law.
