The Bernardo MHB 150 is a car lift for professional use available at Krollit, official Bernardo distributor since 2007.
- Vendor: Bernardo
- Model: MHB 150
- Official Bernardo distributor since 2007
- Shipping from Krollit warehouse
Who uses the MHB 150 and for what purpose
Car repair shops, tire shops, and body shops use the MHB 150 for lifting cars during maintenance, repair, and underbody inspection in complete safety.
Its place in the Bernardo range
The Bernardo MHB 150 is part of the Bernardo car lift range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.
Krollit logistics and support
Machine shipping in 5-9 working days (7 days for Southern Italy). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Customer support in Italian available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.
Who is the MHB 150 for?
The MHB 150 is recommended for the following professional profiles:
-
Car repair shops, tire shops, and body shops: lifting cars for maintenance, repair, and inspection.
-
Light carpentry workshops and warehouses: vertical handling of heavy loads on level and anchored flooring.
Not suitable for: vehicles exceeding the stated capacity (vans, trucks, or buses require lifts with higher capacity (5+ tons)).
Frequently Asked Questions
What is the maximum lifting capacity of the MHB 150?
See "Capacity" in the technical table: typically 2,500 to 6,000 kg for 2-post lifts intended for passenger cars.
For vans and light commercial vehicles, a capacity of 4,000-5,000 kg is needed. For heavy trucks and SUVs, consider 4-post lifts with a capacity of 6,000+ kg.
What lifting height does it reach?
See "Max lifting height" in the technical table: typically 1,800-2,000 mm for 2-post lifts.
The maximum height allows ergonomic access to the underbody. Check the usable height of the workshop, adding at least 300 mm above the raised vehicle.
Does it require professional installation?
Yes, column lifts require anchoring to the floor with chemical anchors and installation by qualified personnel.
The floor must be made of C25/30 concrete with a minimum thickness of 150 mm. Krollit recommends annual periodic inspection by a specialized technician for safety.
What electrical power supply does it require?
Typically 230 V single-phase for basic (entry-level) models, 400 V three-phase for professional models.
Motors of 2.2 kW and above require a dedicated three-phase line. Check the availability of the line and the capacity of the residual current device before installation.
Is it compliant with CE regulations?
Yes, Bernardo lifts comply with Machinery Directive 2006/42/EC and have a declaration of conformity.
CE conformity is mandatory for professional use. Keep the documentation and maintenance manual for periodic checks required by Italian law.
