Note: Some of the products shown may be fitted with optional accessories. Subject to technical and aesthetic changes.
This promotion is not valid on discounted products or on bundled offers.
BRHP 200 fixed cylinder hydraulic industrial press
BRHP 200 fixed cylinder hydraulic industrial press is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Delivery and Shipping
Delivery and Shipping
At Krollit, we guarantee a safe and reliable shipping process. Orders are handled with the utmost care and traceability until delivery.
For international shipments, please send your request via the dedicated contact form.
Upon delivery, always sign the delivery note with the words “subject to inspection” to allow for proper handling of any irregularities or discrepancies in the product.
Our goal is to ensure you receive prompt service and a worry-free shopping experience.
BRHP 200 fixed cylinder hydraulic industrial press
Description
Logistics
Bernardo shipping: 5–9 working days (7 days to the South). Original spare parts available with 3–5 working days shipping. Customer service available in Italian.
Technical specifications
technical specifications
| Compression force | 200 to |
| Distance between columns | 1100 mm |
| Piston stroke | 400 mm |
| Piston diameter | 150 m |
| Maximum pressure | 250 bar |
| Table width | 680 mm |
| Max. working height | 1110 mm |
| Feed rate | 8,2 mm/sec. |
| Return speed | 10 mm/sec. |
| Motor power | 7,5 kW |
| Width | 2000 mm |
| Depth | 1000 mm |
| Height | 2700 mm |
| Approximate weight | 2250 kg |
Warranty
Warranty terms and support procedures are available on the dedicated Krollit page.
View Krollit warranty termsFAQ / Frequently asked questions
Frequently asked questions
What is the difference between the BHP, HWP and BRHP QZ series in the Bernardo press range?
The BRHP QZ series features a movable cylinder head on four columns (Quick Zone): the cylinder moves horizontally to position itself above any point on the table without moving the workpiece. With BRHP 100t, it is suitable for pressing off-center workpieces, asymmetric operations and operations where the workpiece cannot be centered under the fixed cylinder.
Does the BRHP 100t force also apply at the minimum piston stroke?
The nominal BRHP 100t force is the maximum force developed at the maximum hydraulic system pressure. At the beginning of the stroke (piston at top dead center) the force is the same - it is constant throughout the useful stroke. The included pressure gauge shows the pressure in bar: multiplying by the piston area gives the effective force in kN or tons.
Is the pressure gauge included as standard?
Yes - all Bernardo BHP, HWP and BRHP presses include a pressure gauge for direct reading of the applied force. Indispensable for not exceeding the resistance of the pressed components (e.g. maximum interference of a bearing on the shaft) and for operations requiring a specific assembly force.
What foundation does it require?
Presses up to 100t are fixed to the floor with M12/M16 bolts on standard concrete (15–20 cm). For presses over 100t, check the floor's load-bearing capacity with a structural engineer based on the base footprint. Customer service available in Italian.
Are spare parts and assistance available?
Original spare parts available with 3–5 working days shipping. Customer service available in Italian.
-
Product safety
-
Reviews
Product safety
