{"product_id":"riga-t-carpentiere-igm","title":"IGM Carpenter's T-square","description":"\u003cp\u003eThe IGM Marking T-Rule is a professional-grade duralumin alloy marking T-square, featuring marking holes every 1 mm for drawing lines parallel to the edge of the panel from 5 mm up to 160 or 260 mm. Available in two sizes: 160 mm scale (200 mm total length) and 260 mm scale (300 mm total length). Distributed in Italy by Krollit, official IGM distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: corrosion-resistant aluminum alloy (duralumin)\u003c\/li\u003e\n\u003cli\u003eMarking holes: every 1 mm\u003c\/li\u003e\n\u003cli\u003eParallel marking range 160 version: 5 to 160 mm from the edge\u003c\/li\u003e\n\u003cli\u003eParallel marking range 260 version: 5 to 260 mm from the edge\u003c\/li\u003e\n\u003cli\u003eDimensions 160 version: 200×98×14 mm\u003c\/li\u003e\n\u003cli\u003eDimensions 260 version: 300×98×14 mm\u003c\/li\u003e\n\u003cli\u003eGraduated scale with marks every 5 mm\u003c\/li\u003e\n\u003cli\u003eCompatible with leads from 0.5–1 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho is the Marking T-Rule for?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eJoiner and cabinetmaker\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eThe holes every 1 mm allow for millimetric precision in marking parallel lines on the edge of panels and boards, without the need for a separate square.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction carpenter\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eThe T-stop slides along the edge of the workpiece and maintains a right angle during marking; the 260 mm version covers beam sections up to 260 mm.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork with tolerances below 0.5 mm\u003c\/td\u003e\n\u003ctd\u003eNot suitable\u003c\/td\u003e\n\u003ctd\u003ePrecision is limited by the lead diameter (0.5–1 mm); for high-precision marking, a certified measuring instrument is required.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e marking on curved or irregular surfaces, where the T-stop cannot slide evenly along the edge.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminum alloy (duralumin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAnodized, corrosion-resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions 160 version\u003c\/td\u003e\n\u003ctd\u003e200×98×14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions 260 version\u003c\/td\u003e\n\u003ctd\u003e300×98×14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScale 160 version\u003c\/td\u003e\n\u003ctd\u003e5–160 mm from the edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScale 260 version\u003c\/td\u003e\n\u003ctd\u003e5–260 mm from the edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking hole pitch\u003c\/td\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScale marks\u003c\/td\u003e\n\u003ctd\u003eEvery 5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible leads\u003c\/td\u003e\n\u003ctd\u003e0.5–1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between the 160 mm and 260 mm versions of the Marking T-Rule?\u003c\/h3\u003e\n\u003cp\u003eThe 160 version has a scale from 5 to 160 mm and total dimensions of 200×98×14 mm; the 260 version has a scale from 5 to 260 mm and dimensions of 300×98×14 mm. The 260 version is recommended for panels and boards wider than 160 mm, such as kitchen countertops or furniture panels.\u003c\/p\u003e\n\u003ch3\u003eHow is the Marking T-Rule used to draw parallel lines?\u003c\/h3\u003e\n\u003cp\u003ePlace the T-stop on the edge of the panel, insert the lead tip into the hole corresponding to the desired distance, and slide the rule along the edge, keeping the lead in the hole. The result is a line parallel to the edge with a maximum deviation equal to the lead diameter (0.5–1 mm).\u003c\/p\u003e\n\u003ch3\u003eDoes the Marking T-Rule also work as a 90° square?\u003c\/h3\u003e\n\u003cp\u003eYes. The T-stop ensures a right angle between the rule and the edge of the workpiece, allowing for the marking of lines perpendicular to the edge as well as parallel ones. It does not replace an angle square for measurements of angles other than 90°.\u003c\/p\u003e\n\u003ch3\u003eWhich leads are compatible with the marking holes?\u003c\/h3\u003e\n\u003cp\u003eThe holes are sized for leads with a diameter of 0.5 to 1 mm, standard for technical pencils and carpentry mechanical pencils. Leads with a diameter greater than 1 mm will not fit into the holes and will compromise marking precision.\u003c\/p\u003e\n\u003ch3\u003eIs the Marking T-Rule available in versions with an inch scale?\u003c\/h3\u003e\n\u003cp\u003eNo. The scale is exclusively in millimeters, with marks every 5 mm and holes every 1 mm. A version with an imperial scale is not available.\u003c\/p\u003e","brand":"igm","offers":[{"title":"160 mm","offer_id":53077066875208,"sku":"MER-ZP160","price":33.1,"currency_code":"EUR","in_stock":true},{"title":"260 mm","offer_id":53077066907976,"sku":"MER-ZP260","price":39.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/MER-ZP160_01_web.webp?v=1778508344","url":"https:\/\/www.krollit.com\/products\/riga-t-carpentiere-igm","provider":"Krollit","version":"1.0","type":"link"}