Bernardo HSS Bandsaw Blade 1638 x 13 x 0.65 - 14 tpi is a professional cutting tool available from Krollit, an official Bernardo distributor since 2007.
- Dimensions: 1638 x 13 x 0.65 mm
- Teeth per inch: 14
- Material: HSS
Who uses the HSS Bandsaw Blade 1638 x 13 x 0.65 - 14 tpi and for what
Mechanical workshops and tool laboratories use the HSS Bandsaw Blade 1638 x 13 x 0.65 - 14 tpi for cutting, drilling or sharpening operations on materials compatible with the tool's geometry.
Its place in the Bernardo range
Bernardo HSS Bandsaw Blade 1638 x 13 x 0.65 - 14 tpi is part of the Bernardo cutting tool range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.
Krollit logistics and support
Shipping 3-5 working days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who the HSS Bandsaw Blade 1638 x 13 x 0.65 - 14 tpi is for
The hss bandsaw blade 1638 x 13 x 0.65 - 14 tpi is recommended for the following professional profiles:
-
Mechanical workshops and tool laboratories: cutting and sharpening operations on compatible materials.
-
Users with compatible machines: replacement or original tool for the specified machine.
-
Out-of-specification materials: verify machinable material and tool geometry before use.
Frequently asked questions
Which bandsaw is it compatible with?
It is specific for semi-professional metal bandsaws (blade travel 1638 mm).
Check the blade travel (closed blade length) of your saw before purchasing. The length is indicated in the machine manual or printed on the existing blade.
What is 14 TPI toothing used for?
Suitable for cutting thin sheets (<10 mm), thin-walled tubes, hardened materials.
General rule for metal: low TPI (4-6) for large solids, medium TPI (8-10) for tubular profiles, high TPI (12-14) for thin sheets and thin-walled tubes. Typical cutting speed: 30-90 m/min on mild steel.
What can be cut with a width of 13 mm?
It is suitable for contour cuts and curves, blades for small bench saws.
The width determines rigidity and the type of cut possible. For metals, a bimetallic blade (Biflex) with M42 HSS steel teeth brazed onto a flexible body is always required.
What does Biflex mean?
Biflex is a bimetallic blade with a flexible steel body and M42 HSS steel teeth, optimized for metal cutting.
M42 teeth (HSS-Co8 with a high percentage of cobalt) resist temperatures up to 600 °C and maintain sharpness on hardened steels and hard alloys. The bimetallic structure combines body flexibility and tooth hardness.
How to tension it correctly?
Typical tension for metal blades: 25,000-35,000 PSI. Incorrect tension is the main cause of premature breakage.
Blades that are too loose cut crooked and break due to fatigue; too tight blades break due to mechanical tension. Always consult the saw manual for the exact value. Check cold after 5 minutes of work.
