{"product_id":"levigatrice-cartongesso-guede-gtbs-710","title":"Güde GTBS 710 Telescopic Drywall Sander","description":"\u003cp\u003e\u003cstrong\u003eGüde GTBS 710 drywall sander – Ø 225 mm sanding pad, 1,450–1,700 mm telescopic handle\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Güde GTBS 710 is a drywall sander for professional and hobby use, featuring a 710 W motor, variable speed of 1,200–2,500 rpm, a Ø 225 mm round sanding pad, and a telescopic handle extendable from 1,450 to 1,700 mm. Manufactured by Güde, a German brand founded in 1979 and headquartered in Wolpertshausen. Distributed in Italy by Krollit, official Güde distributor since 2007.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotor power P1: 710 W\u003c\/li\u003e\n\u003cli\u003eVoltage: 230 V \/ 50 Hz\u003c\/li\u003e\n\u003cli\u003eAdjustable no-load speed: 1,200–2,500 rpm\u003c\/li\u003e\n\u003cli\u003eRound sanding pad diameter: Ø 225 mm\u003c\/li\u003e\n\u003cli\u003eDelta sanding pad included: approx. 220 mm\u003c\/li\u003e\n\u003cli\u003eSpindle thread: M14\u003c\/li\u003e\n\u003cli\u003eTelescopic handle: 1,450–1,700 mm\u003c\/li\u003e\n\u003cli\u003ePower cable length: 4.1 m\u003c\/li\u003e\n\u003cli\u003eNet weight: 6.58 kg\u003c\/li\u003e\n\u003cli\u003eNoise level LWA: 105.2 dB\u003c\/li\u003e\n\u003cli\u003eVibration: 5.848 m\/s²\u003c\/li\u003e\n\u003cli\u003eTool-free pad change, soft-grip handle, integrated dust extraction port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho uses the GTBS 710 and for what\u003c\/h3\u003e\n\u003cp\u003eThe GTBS 710 is used by painters, drywall installers, and renovators for finishing walls and ceilings after plastering, particularly for leveling joints between drywall sheets, eliminating trowel marks, and preparing surfaces before painting. The 1,450–1,700 mm telescopic handle allows working on ceilings in homes and offices up to approximately 3 meters high without a ladder. It is also used in residential renovations to remove old paint layers from internal plaster and for preparing walls before applying decorative plaster or lime-based coatings.\u003c\/p\u003e\n\u003ch3\u003eKrollit Logistics and Support\u003c\/h3\u003e\n\u003cp\u003eShipping 5-7 business days from Krollit warehouse, Monteforte Irpino (AV). Technical support in Italian at +39 0825-1494022.\u003c\/p\u003e\n\u003ch3\u003eWho is the GTBS 710 for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePainter, drywall installer, small renovator\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eThe 710 W and variable speed 1,200–2,500 rpm handle standard finishing of plastering and walls without overheating the motor during discontinuous work cycles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDIY enthusiast renovating their own home\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eTool-free pad changes, 1,450–1,700 mm telescopic handle, and 6.58 kg weight make the tool operational in minutes, even without specific experience\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNew construction site with continuous 8-hour daily use\u003c\/td\u003e\n\u003ctd\u003eNot suitable\u003c\/td\u003e\n\u003ctd\u003eThe 710 W motor and 6.58 kg weight are sized for intensive discontinuous use, not for continuous serial work cycles on large surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e sanding high-strength cement-based plaster, removing epoxy coatings and resins, sanding parquet or wood (these tasks require dedicated machines with higher power and specific sanding pads).\u003c\/p\u003e\n\u003ch3\u003eMotor and Power Supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power P1\u003c\/td\u003e\n\u003ctd\u003e710 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e230 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency\u003c\/td\u003e\n\u003ctd\u003e50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo-load speed\u003c\/td\u003e\n\u003ctd\u003e1,200–2,500 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable length\u003c\/td\u003e\n\u003ctd\u003e4.1 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWorking Capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRound sanding pad diameter\u003c\/td\u003e\n\u003ctd\u003eØ 225 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDelta sanding pad\u003c\/td\u003e\n\u003ctd\u003eapprox. 220 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle thread\u003c\/td\u003e\n\u003ctd\u003eM14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAbrasive paper grits provided\u003c\/td\u003e\n\u003ctd\u003e80, 120, 180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePad change\u003c\/td\u003e\n\u003ctd\u003etool-free\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDimensions and Weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength (telescopic)\u003c\/td\u003e\n\u003ctd\u003e1,450–1,700 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e300 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e280 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e6.58 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGross weight (with packaging)\u003c\/td\u003e\n\u003ctd\u003e7.88 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackaging dimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e728 x 295 x 262 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEmissions and Compliance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVibration\u003c\/td\u003e\n\u003ctd\u003e5.848 m\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise level LWA\u003c\/td\u003e\n\u003ctd\u003e105.2 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSoft-grip handle\u003c\/td\u003e\n\u003ctd\u003eyes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGTIN\u003c\/td\u003e\n\u003ctd\u003e4015671386045\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGüde article number\u003c\/td\u003e\n\u003ctd\u003e55570\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eStandard Equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1× Ø 225 mm round sanding pad\u003c\/li\u003e\n\u003cli\u003e1× approx. 220 mm delta sanding pad\u003c\/li\u003e\n\u003cli\u003e12× round abrasive paper discs (grits 80, 120, 180)\u003c\/li\u003e\n\u003cli\u003e12× delta abrasive paper sheets (grits 80, 120, 180)\u003c\/li\u003e\n\u003cli\u003e1× dust extraction port\u003c\/li\u003e\n\u003cli\u003eUser manual and CE declaration of conformity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProfessional Applications\u003c\/h3\u003e\n\u003ch3\u003eSanding of plasterwork on walls and ceilings\u003c\/h3\u003e\n\u003cp\u003eThe GTBS 710 sands joints, transitions, and plastered areas after drywall sheet installation. The variable speed of 1,200–2,500 rpm allows adapting the abrasive action to the hardness of the plaster: low speeds of 1,200-1,500 rpm for fresh and soft plaster, high speeds of 2,000-2,500 rpm for seasoned plaster. The integrated dust extraction port connects to a dry vacuum cleaner to reduce the dispersion of plaster dust in the work environment.\u003c\/p\u003e\n\u003ch3\u003ePreparation of walls before painting\u003c\/h3\u003e\n\u003cp\u003eOn existing paint coatings, the GTBS 710 sands bases, irregularities, and old paint residues to prepare the surface for the new coat. The approx. 220 mm delta sanding pad reaches internal corners and areas near skirting boards, door frames, and electrical outlets that the Ø 225 mm round sanding pad does not cover, reducing the need for manual finishing sanding.\u003c\/p\u003e\n\u003ch3\u003eOriginal Güde Spare Parts\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eCode\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003cth\u003eNote\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e55570-01001\u003c\/td\u003e\n\u003ctd\u003eTelescopic rod\u003c\/td\u003e\n\u003ctd\u003eMain sliding component of the handle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e55570-01002\u003c\/td\u003e\n\u003ctd\u003eSanding pad locking nut\u003c\/td\u003e\n\u003ctd\u003eTo be replaced if it shows play or does not hold the sanding pad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e55570-01003\u003c\/td\u003e\n\u003ctd\u003eSpeed controller board\u003c\/td\u003e\n\u003ctd\u003eElectronic control unit for rpm 1,200–2,500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e55570-01005\u003c\/td\u003e\n\u003ctd\u003eOn\/Off switch KR82 250 V (15 A)\u003c\/td\u003e\n\u003ctd\u003eStandard electrical spare part\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e55570-01008\u003c\/td\u003e\n\u003ctd\u003eLED lighting\u003c\/td\u003e\n\u003ctd\u003eIntegrated work light\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e55570-01011\u003c\/td\u003e\n\u003ctd\u003eSuction hose 350 mm Ø 40 mm\u003c\/td\u003e\n\u003ctd\u003eInternal flexible hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e55570-01023\u003c\/td\u003e\n\u003ctd\u003eSuction hose 1,110 mm\u003c\/td\u003e\n\u003ctd\u003eFlexible hose on vacuum cleaner side\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e55570-01042\u003c\/td\u003e\n\u003ctd\u003eDust cap\u003c\/td\u003e\n\u003ctd\u003eProtection for internal suction mechanisms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow high can you work with the GTBS 710 without a ladder or scaffolding?\u003c\/summary\u003e\n\u003cp\u003eThe telescopic handle extends from 1,450 to 1,700 mm. Adding the operator's height and arm extension, typical ceilings in homes and offices up to approximately 3 meters from the ground can be reached.\u003c\/p\u003e\n\u003cp\u003eFor ceilings between 3.2 and 3.5 meters, a scaffolding tower or stable ladder is needed. For heights over 4 meters, scaffolding and drywall sanders with additional extension must be considered, resulting in increased weight and operator fatigue. The GTBS 710, weighing 6.58 kg, remains manageable with an outstretched arm for medium-duration sanding cycles.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat materials does the GTBS 710 work on, and which ones should be avoided?\u003c\/summary\u003e\n\u003cp\u003eThe GTBS 710 is sized for gypsum plaster, drywall, internal civil plaster, and washable paints. Intended uses: leveling joints between sheets, finishing plasterwork, removing old paint.\u003c\/p\u003e\n\u003cp\u003eTo be avoided: high-strength cement-based plaster, epoxy finishes, two-component resins. For parquet, wood, and metal sanding, dedicated machines are needed: the M14 thread is common to other angle grinders, but the maximum 2,500 rpm is not suitable for high-speed diamond discs or metal polishing pads.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you connect the vacuum cleaner to the sander, and what type is needed?\u003c\/summary\u003e\n\u003cp\u003eThe dust extraction port is included in the standard equipment. It connects to a dry vacuum cleaner with a standard diameter flexible hose via the integrated nozzle on the sander body.\u003c\/p\u003e\n\u003cp\u003eFor professional use, a Class M vacuum cleaner with automatic filter cleaning is recommended, as gypsum dust is fine and quickly clogs standard filters of household vacuum cleaners. Good suction keeps the work area visible, reduces dust deposits on furniture and floors of the job site, and extends the life of the abrasive paper.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhy does it have variable speed 1,200–2,500 rpm, and when is it used?\u003c\/summary\u003e\n\u003cp\u003eThe electronic regulation allows choosing the speed based on the material: 1,200-1,500 rpm for fresh and soft plaster, 1,800-2,200 rpm for standard finishes, 2,300-2,500 rpm for seasoned plaster or old paint to be removed.\u003c\/p\u003e\n\u003cp\u003eWorking at too high a speed on fresh plaster creates undulations and sanding marks. Too low a speed on hard plaster overworks the motor and prolongs working time. The regulation is managed by the electronic board with spare part code 55570-01003, replaceable in case of electronic control failure.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you change the round or delta sanding pad on the GTBS 710?\u003c\/summary\u003e\n\u003cp\u003eThe change is tool-free. Unscrew the locking nut, remove the pad in use, and mount the desired one by re-tightening the nut. The operation takes less than a minute.\u003c\/p\u003e\n\u003cp\u003eThe pads supplied are the Ø 225 mm round for open wall and ceiling surfaces, and the approx. 220 mm delta for internal corners and areas near skirting boards, door frames, and electrical outlets. The locking nut (spare part code 55570-01002) should be replaced if it shows play or does not hold the pad in position during rotation.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat abrasive paper is used with the GTBS 710, and how is it attached?\u003c\/summary\u003e\n\u003cp\u003eThe model comes with 12 round discs and 12 delta sheets in grits 80, 120, and 180. The attachment is hook-and-loop (Velcro system) on the sanding pad, without hooks or screws.\u003c\/p\u003e\n\u003cp\u003eFor rough finishing, start with grit 80, for intermediate, switch to 120, for finishing before painting, end with 180 or 240. For very fine plasterwork, 320 grits can be used. Replacement abrasive paper compatible with 225 mm round and approx. 220 mm delta format is available from Krollit warehouse with standard grits for drywall.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat warranty and after-sales support does Krollit offer for the GTBS 710?\u003c\/summary\u003e\n\u003cp\u003eKrollit applies the official Güde warranty on the components of the GTBS 710 model. Krollit has been an official Güde distributor since 2007 and manages warranty claims directly in Italy, without shipping abroad at the customer's expense.\u003c\/p\u003e\n\u003cp\u003eTechnical support in Italian at +39 0825-1494022 from Monday to Friday. Original Güde spare parts with dedicated codes for the model (series 55570-01xxx) are available at Krollit warehouse, Monteforte Irpino (AV). Among the most requested spare parts for this model: telescopic rod, speed controller board, sanding pad locking nut, and suction hoses.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Guede","offers":[{"title":"Default Title","offer_id":53038190231880,"sku":"55570","price":106.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Levigatrice_per_cartongesso_G_de_GTBS_710_telescopicaLevigatricepercartongessoGudeGTBS710telescopica.jpg?v=1777943121","url":"https:\/\/www.krollit.com\/products\/sander-cartongesso-guede-gtbs-710","provider":"Krollit","version":"1.0","type":"link"}