This promotion is not valid on discounted products or on bundled offers.
Fabric sanding belt 685 x 50 mm - K 100 (10 pieces)
Fabric sanding belt 685 x 50 mm - K 100 (10 pieces) is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Delivery and Shipping
Delivery and Shipping
At Krollit, we guarantee a safe and reliable shipping process. Orders are handled with the utmost care and traceability until delivery.
For international shipments, please send your request via the dedicated contact form.
Upon delivery, always sign the delivery note with the words “subject to inspection” to allow for proper handling of any irregularities or discrepancies in the product.
Our goal is to ensure you receive prompt service and a worry-free shopping experience.
Fabric sanding belt 685 x 50 mm - K 100 (10 pieces)
Description
Properties
- Electrocorundum abrasive belt universally usable for grinding and deburring steel, aluminum, cast iron parts, non-ferrous materials, plywood, soft and hard woods.
- High efficiency, thanks to high durability and performance
Logistics
Bernardo shipping: 5–9 working days (7 days to the South). Original spare parts available with 3–5 working day shipping. Customer support in Italian available.
Technical specifications
Technical specifications
Abrasive belt length |
685 mm |
Abrasive belt width |
50 mm |
Grit |
100 |
Warranty
Warranty terms and support procedures are available on the dedicated Krollit page.
View Krollit warranty termsFAQ / Frequently asked questions
Frequently asked questions
Cloth belt vs. paper belt: when to choose cloth?
Cloth belts are more flexible, tear-resistant, and tolerant of bending — suitable for curved surfaces, edges, pipes, and metalworking. Paper belts are more rigid and suitable for flat wood and plastic surfaces. For metal, cloth is always preferable: it withstands heat generated by friction better and does not tear with metal shavings.
When is 100 grit used and on what materials?
100 grit is suitable for sanding metals and hard woods: surface preparation for finishing, blending welded edges. Typical materials: steel, stainless steel, aluminum, hard solid wood. For stainless steel, use specific belts not contaminated by steel — ferrous residues cause oxidation stains. The electrocorundum (Al₂O₃) abrasive cloth in this series maintains its cutting edge longer than paper abrasive of the same grit.
Can the 685 x 50 mm roll belt be cut to size?
Yes — fabric roll belts can be cut with sturdy scissors or a utility knife. The length from the roll (50 m) allows for belts of any length to be made. Always cut perpendicular to the belt's direction of travel to prevent edge detachment during use.
How to prevent belt clogging on aluminum and plastic?
Aluminum: use belts with a semi-open coat (marked "semi-open coat") and, if possible, apply paraffin wax to the belt to reduce aluminum adhesion. Plastic: reduce speed and work intermittently to avoid overheating the material. A clogged belt does not abrade but only generates heat — it should be cleaned with a wire brush or replaced.
Delivery times?
Original spare parts available with 3–5 working day shipping. Customer support in Italian available.
-
Product safety
-
Reviews
Product safety
