The Flott BSM 150 A/pol. is a professional-grade grinder, weighing 105 kg. Krollit has been an official Flott distributor since 2007.
- Belt dimensions: 2000 x 150 mm
- Grinding area: 600 mm
- Belt speed: 15 / 30 m/s
- Grinder motor: 3.0 / 3.75 kW – three-phase 400 V
- Suction capacity: approx. 630 m³/h
- Suction motor: 0.37 kW
Who uses the BSM 150 A/pol. and for what
Mechanical workshops and metalworking shops use the BSM 150 A/pol. for grinding and satin finishing stainless steel, aluminum, and alloys, removing burrs, and finishing surfaces.
Its place in the Flott range
The Flott BSM 150 A/pol. is part of the Flott range of grinders, distributed in Italy by Krollit since 2007. The Flott range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Flott catalog on Krollit or contact customer support for assistance with selection.
Krollit logistics and support
Machine shipping in 5-9 business days (7 days to the South). For spare parts and accessories, shipping in 3-5 business days from Krollit warehouse. Customer support in Italian is available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.
Who is the BSM 150 A/pol. for
The BSM 150 A/pol. is recommended for the following professional profiles:
-
Mechanical workshops for metal finishing: grinding and satin finishing of stainless steel, aluminum, and alloys.
-
Metalworking shops and production laboratories: deburring, removing cutting burrs, and surface finishing.
Not suitable for: mirror polishing chrome (dedicated polishing machines with abrasive pastes are needed for final chrome plating).
Table, dimensions, and geometry
| Belt dimensions |
2000 x 150 mm |
| Weight |
105 kg |
| Dimensions without VP |
1100 x 550 x 1035 mm |
| Dimensions with VP |
800 x 600 x 1450 mm |
Motor and power supply
| Grinder motor |
3.0 / 3.75 kW – three-phase 400 V |
| Suction motor |
0.37 kW |
| Motor warranty |
5 years (single shift) |
Other specifications
| Grinding area |
600 mm |
| Suction capacity |
approx. 630 m³/h |
| Belt speed |
15 / 30 m/s |
Frequently Asked Questions
What can the BSM 150 A/pol. grind?
Stainless steel, aluminum, metal alloys and (in some models) also wood with appropriate abrasive belts.
A specific belt grit is used for each material: 60-80 for roughing, 120-180 for finishing, 240+ for pre-polishing.
What size abrasive belt does it use?
See "Belt dimensions" in the technical table: typically from 75x2,000 mm to 150x2,500 mm.
Belts are consumable spare parts: Krollit supplies original Bernardo belts in various grit sizes to optimize the finish.
Is the belt speed adjustable?
Professional models offer Vario or multi-step speeds (typically 4-8 steps).
High speeds (>20 m/s) for stainless steel and finishing, low speeds (<10 m/s) for wood and soft materials to avoid burning.
Does it have integrated suction?
Professional models offer a suction connection for grinding dust.
Suction is essential for stainless steel (respirable dust) and for wood (fire risk from sparks). Check the connection diameter for connection to a centralized system.
How much does the machine weigh?
See "Weight" in the technical table: typically 50-200 kg for bench and pedestal models.
Pedestal models require floor mounting, while bench models are installed on a sturdy bench of adequate size.
