{"product_id":"cesoie-idrauliche-bernardo-hps-90","title":"Bernardo HPS 90 Hydraulic Section Shear – 90 tons, industrial multifunction","description":"\u003cp\u003eThe Bernardo HPS 90 hydraulic ironworker offers 90 tons of punching force, drilling capacity of Ø 30 mm on 20 mm thick material (expandable to Ø 50 mm with accessories), flat steel cutting up to 20 × 330 mm, angle sections 140 × 140 × 12 mm at 90°, round bars Ø 50 mm and square bars 50 × 50 mm, 5.5 kW motor, 6 strokes\/min. Integrated notching station up to 20 mm. Weight 2,500 kg. Manufactured in Austria, distributed in Italy by Krollit as an official Bernardo distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePunching force:\u003c\/strong\u003e 90 tons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard drilling:\u003c\/strong\u003e Ø 30 mm on 20 mm thickness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlat steel cutting:\u003c\/strong\u003e 20 × 330 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle section cutting (90°):\u003c\/strong\u003e 140 × 140 × 12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating stations:\u003c\/strong\u003e Punching, flat bar cutting, section cutting, bar cutting, notching\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 5.5 kW – 400V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2,500 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho uses the HPS 90 and for what\u003c\/h3\u003e\n\u003cp\u003eThe Bernardo HPS 90 is the heavy-duty industrial multifunction hydraulic ironworker in the HPS range. With 90 tons of punching force and a drilling capacity of Ø 30 mm on 20 mm thick material, it covers processes that the HPS 60 cannot handle. The five operating stations (punching, flat bar cutting, section cutting, bar cutting, notching) are dimensioned for daily industrial cycles on heavy structural steel. The 2,500 kg structural weight provides the necessary stability for operations on angle sections up to 140 × 140 × 12 mm and bars up to Ø 50 mm. In the workshops of Krollit's customers, it is chosen by industrial metal fabricators, steel structure construction workshops, metal prefabrication companies, and foundries with in-house fabrication departments.\u003c\/p\u003e\n\u003ch3\u003eIts place in the Bernardo range\u003c\/h3\u003e\n\u003cp\u003eIn the HPS range, the HPS 90 is the industrial-grade model: above the HPS 60 (60 tons, standard operations) and the HPS 45 (45 tons, entry-level). The difference with the HPS 60 is not only in tonnage (90 vs 60) but in overall sizing: more powerful motor (5.5 vs 4 kW), greater weight (2,500 vs 1,600 kg), greater capacities in all stations. The speed of 6 strokes\/min (vs 8 for the HPS 60) reflects the sizing for thicker materials: each stroke requires more hydraulic energy. For workshops with industrial volumes and the need to drill 20 mm regularly, the HPS 90 is the correct choice; the HPS 60 would be undersized and would wear out quickly under these conditions of use.\u003c\/p\u003e\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eBernardo shipping in 5-9 business days (7 days to Southern Italy). At 2,500 kg, it requires a crane or forklift of adequate capacity for unloading. Check workshop access and flooring before delivery. Original Bernardo spare blades, punches, dies, and accessories are available from stock with 3-5 business days shipping. Customer support is available in Italian.\u003c\/p\u003e\n\n\u003ch3\u003eWho the HPS 90 is for\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassionate hobbyist\u003c\/td\u003e\n\u003ctd\u003eNot suitable\u003c\/td\u003e\n\u003ctd\u003eHeavy industrial machine. Cost, weight (2,500 kg), and sizing are unsuitable for hobby use.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmall\/medium fabrication shop (up to 10 employees)\u003c\/td\u003e\n\u003ctd\u003eAdequate\u003c\/td\u003e\n\u003ctd\u003eFor standard daily use, the HPS 60 is sufficient. The HPS 90 is only justified if thicknesses over 16 mm or sections over 125 × 125 × 12 mm are regularly processed.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndustrial fabrication \/ steel structure production\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003ctd\u003eThe 90 tons and drilling capacity of Ø 30 on 20 mm are sized for heavy industrial work. The 2,500 kg structure handles intensive cycles without vibration.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e applications with drilling thickness over 20 mm in standard mode (consider dedicated industrial presses); high-cadence series production with automatic positioning (consider CNC ironworkers); occasional work on small pieces (the HPS 60 is more economical and correctly sized).\u003c\/p\u003e\n\n\u003ch3\u003ePunching capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePunching force\u003c\/td\u003e\n\u003ctd\u003e90 tons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. punchable thickness\u003c\/td\u003e\n\u003ctd\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard hole diameter\u003c\/td\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. hole diameter (with optional accessories)\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePunch stroke\u003c\/td\u003e\n\u003ctd\u003e80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrokes\/min (20 mm stroke)\u003c\/td\u003e\n\u003ctd\u003e6 cpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThroat depth\u003c\/td\u003e\n\u003ctd\u003e355 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eFlat steel cutting capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. flat steel\u003c\/td\u003e\n\u003ctd\u003e20 × 330 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlat bar blade length\u003c\/td\u003e\n\u003ctd\u003e485 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eAngle section cutting capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAngle sections 90°\u003c\/td\u003e\n\u003ctd\u003e140 × 140 × 12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAngle sections 45°\u003c\/td\u003e\n\u003ctd\u003e50 × 50 × 5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eU \/ I sections (optional)\u003c\/td\u003e\n\u003ctd\u003e160 × 60 × 6.5 mm \/ 160 × 86 × 6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eT sections (optional)\u003c\/td\u003e\n\u003ctd\u003e140 × 140 × 12 mm \/ 70 × 70 × 10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eBar cutting capacity\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRound bars\u003c\/td\u003e\n\u003ctd\u003eØ 50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSquare bars\u003c\/td\u003e\n\u003ctd\u003e50 × 50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotching station\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. notching thickness\u003c\/td\u003e\n\u003ctd\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRectangular notch\u003c\/td\u003e\n\u003ctd\u003e57 × 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTriangular notch\u003c\/td\u003e\n\u003ctd\u003e5 × 5 × 7.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMotor and power supply\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e5.5 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e400V – 50Hz – three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine dimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e1,860 × 800 × 1,900 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e2,500 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWorking heights\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePunching working height\u003c\/td\u003e\n\u003ctd\u003e1,020 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlat bar working height\u003c\/td\u003e\n\u003ctd\u003e910 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBar working height\u003c\/td\u003e\n\u003ctd\u003e1,220 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotching working height\u003c\/td\u003e\n\u003ctd\u003e915 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompliance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirective\u003c\/td\u003e\n\u003ctd\u003eMachinery Directive 2006\/42\/EC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHPS 90 hydraulic ironworker with five integrated operating stations\u003c\/li\u003e\n\u003cli\u003eUser and maintenance manual\u003c\/li\u003e\n\u003cli\u003eIntegrated standard safety set\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eDoes the HPS 90 make sense for a small workshop?\u003c\/summary\u003e\n\u003cp\u003eOnly if thicknesses over 16 mm or angle sections over 125 × 125 × 12 mm are regularly processed. For standard light\/medium fabrication work, the HPS 60 is correctly sized and costs significantly less.\u003c\/p\u003e\n\u003cp\u003eThe price difference between the HPS 60 and HPS 90 is significant. The HPS 90 is justified for workshops that habitually work with heavy structural steel, large-section angle profiles, or flat bars 18-20 mm thick. For mixed use with a prevalence of 5-16 mm thicknesses, the HPS 60 is the logical choice even for professional workshops.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan I expand the drilling capacity beyond Ø 30 mm?\u003c\/summary\u003e\n\u003cp\u003eYes, with optional accessories, the capacity increases to Ø 50 mm. The standard nominal capacity is Ø 30 mm on 20 mm thickness.\u003c\/p\u003e\n\u003cp\u003eFor Ø 35-50 mm holes, the maximum workable thickness is proportionally reduced: typically Ø 50 mm is achieved on 12-15 mm thicknesses. Original Bernardo spare punches and dies are available from stock with 3-5 business days shipping. For non-standard holes, custom supply is available through Bernardo.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat type of power supply and electrical line is needed?\u003c\/summary\u003e\n\u003cp\u003e400V three-phase power supply with a 5.5 kW motor. Requires a dedicated industrial line with an adequate electrical panel and thermal-magnetic protection sized for the motor.\u003c\/p\u003e\n\u003cp\u003eThe inrush current of the 5.5 kW motor can reach sustained peaks: the electrical panel must correctly handle the starting currents. For workshops not yet equipped with an industrial panel, a qualified electrician must be involved for installation. Krollit does not provide on-site electrical service.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow much space is needed to install it?\u003c\/summary\u003e\n\u003cp\u003eThe machine dimensions are 1,860 × 800 × 1,900 mm. The minimum recommended operating area is 5 × 3.5 m, considering space for moving standard 6-meter profiles during cutting.\u003c\/p\u003e\n\u003cp\u003eThe 2,500 kg weight requires an adequately thick reinforced concrete industrial floor: light or screed flooring is not dimensioned. For 6 m long profiles, at least 7 meters of entry space is needed. Working heights vary between 910 and 1,220 mm depending on the station, ergonomic for standing operators.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow fast is it in production?\u003c\/summary\u003e\n\u003cp\u003e6 strokes\/min with a 20 mm stroke. In actual production, with workpiece positioning times, 3-5 operations per minute can be achieved in repetitive work on pre-marked pieces.\u003c\/p\u003e\n\u003cp\u003eThe slower speed compared to the HPS 60 (6 vs 8 cpm) is due to the longer working stroke required to generate 90 tons of force. For high-cadence series production, consider numerically controlled presses with servo drives, sized for rapid automated cycles. The HPS 90 is optimized for high-capacity work at a moderate pace, typical of industrial fabrication.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Bernardo","offers":[{"title":"Default Title","offer_id":50693013832008,"sku":"06-1624XL","price":11380.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/Cesoia_idraulica_Bernardo_HPS_90_per_profilati_in_acciaio.jpg?v=1759223254","url":"https:\/\/www.krollit.com\/products\/shears-hydraulic-bernardo-hps-90","provider":"Krollit","version":"1.0","type":"link"}