Güde GRH 2/800HD Hydraulic Trolley Jack

Güde GRH 2/800HD Hydraulic Trolley Jack – 2000 kg, 800 mm height, extra-long industrial frame

The Güde GRH 2/800HD hydraulic trolley jack is a specialised version for vertical lifting of vehicles up to 2000 kg with extended underbody access up to 800 mm height (heavy vehicles, small buses, light trucks, vehicles with very high ride height, professional workshops requiring maximum height for frame work). The designation “800HD” means: maximum height 800 mm, Heavy Duty version with reinforced industrial construction.

The critical difference compared with all previous models is the extraordinary maximum height of 800 mm, which allows full underbody access even on very tall vehicles such as buses, light trucks and modified vehicles with raised suspension. The 2.5/510L model reaches only 508 mm – 292 mm less. The ultra-long 1180 mm frame, compared with 720 mm on the 2.5/510L model and 530 mm on the 330L model, distributes the load over an even wider base – ensuring absolute lateral stability during work on heavy loads.

Mechanics and design:

• 2000 kg capacity – Static lifting capacity up to 2000 kg. Suitable for heavy standard vehicles, commercial vans, light trucks, small buses and modified cars up to 2000 kg
• 145 mm minimum height – Higher minimum height than the sports models, 85 mm on the 330L and 80 mm on the 2.5/510L. Not suitable for low/sports cars – intended for vehicles with normal or raised ride height
• 800 mm maximum height – Exceptional height. Allows full underbody access even on very tall vehicles, such as buses, raised light trucks and modified vehicles. The 2.5/510L model reaches only 508 mm, which is insufficient for ultra-high vehicles
• 655 mm lifting travel – The maximum lifting travel in the range, compared with 428 mm on the 2.5/510L model. Allows full lifting from 145 mm to 800 mm on any type of tall vehicle
• 1180 mm ultra-long frame – Maximum length for industrial stability. Compared with the 2.5/510L model, 720 mm, the 460 mm extension distributes the load over an even more substantial base – ensuring absolute lateral stability during pumping on 2000 kg loads
• 120 mm platform – The largest diameter in the range, compared with 55 mm on the 330 model, 60 mm on the 330L model and an estimated 75 mm on the 2.5/510L model. Uniform load distribution over the largest surface area, reducing stress concentration
• Integrated pedal – Pedal control system instead of a hydraulic handle, as used on lighter models. Ergonomic operation for extended work – the foot provides precise control while the hands remain free for tools
• Heavy Duty construction (HD) – Reinforced frame with increased steel thickness compared with standard models. HD designation means equipment for intensive use, 200+ lifts/month and repeated heavy cycles
• Rubber underbody protection – Integrated protection on the upper part of the trolley prevents damage to the vehicle underbody during positioning
• 2 swivel wheels, 360° – Agile mobility between workshop stations. No manual carrying effort required – with a weight of 58 kg, this is semi-stationary equipment
• 58 kg weight – Significantly heavy, compared with 10.9 kg for the 330L model and 29 kg for the 2.5/510L model. It is professional semi-stationary equipment – positioned in the work area and kept there during the shift

Who chooses it:

• Workshops specialised in tall vehicles – Maintenance on buses, light trucks and modified raised vehicles requiring underbody access up to 800 mm. The 800HD jack is a unique specialised tool
• Heavy commercial fleet maintenance centres – Maintenance on company light trucks, heavy vans and raised vehicles. The 800 mm height is essential for full frame access
• Workshops with intensive cycles on heavy vehicles – More than 200 lifts/month on mixed heavy fleets. Heavy Duty construction and the ultra-long frame ensure reliability during intensive cycles
• Industrial diagnostic and inspection centres – Complete frame inspection on tall vehicles, structural repairs and technical checks on buses and light trucks. The 800 mm height allows full access

Who chooses it in Italy

Workshops specialised in buses and light trucks – Maintenance on tourist buses, company light trucks and vehicles with raised suspension. The 800 mm maximum height is essential – standard models do not reach the height required for full frame access.

Heavy fleet maintenance centres – Management of commercial fleets, such as couriers, service vehicles and transport fleets. The 800HD jack also covers modified vehicles with raised suspension – the 800 mm height allows specialised work.

Workshops with intensive heavy-duty cycles – High-volume cycles on 1500–2000 kg vehicles. Heavy Duty construction + ultra-long frame ensure stability during repeated intensive cycles, eliminating stability concerns on heavy loads.

After-sales support and accessory compatibility

Krollit supplies original Güde spare parts for the hydraulic jack with average delivery times of 5–7 working days:

• Replacement hydraulic cylinder, in case of internal damage from overload
• Replacement manual pump, in case of wear or pressure loss
• Specific hydraulic oil, 5–10 litres
• Replacement integrated pedal, in case of breakage
• Replacement load platform, 120 mm
• Replacement swivel wheels
• Replacement rubber underbody protection
• Replacement safety valve
• Annual maintenance kit, oil + complete inspection
• Italian manual and technical data sheet available in PDF format

Who the Güde GRH 2/800HD hydraulic trolley jack is suitable for

Not suitable for: Workshops working only on sports/low cars, as the 145 mm minimum height is too high – use the 330L model; very restricted workshop spaces, as the 1180 mm length is the maximum footprint; occasional cycles on tall vehicles, where the investment is not justified by occasional maintenance.

Technical specifications

Capacity and lifting heights

Lifting mechanism

Structure and mobility

Compliance and certifications

• Compliant with Machinery Directive 2006/42/EC
• Compliant with European safety standards for professional hydraulic jacks
• Heavy Duty certification for intensive use
• Suitable for intensive professional use in Italy

Standard equipment

• Complete GRH 2/800HD hydraulic trolley jack
• Integrated pedal for ergonomic control
• Double-acting steel hydraulic cylinder
• Manual pump
• 120 mm diameter load platform
• Integrated safety valve
• 2 swivel wheels, 360°
• Rubber underbody protection
• Manual in German
• Technical data sheet

Frequently asked questions

What is the main use of the GRH 2/800HD with such an exceptional 800 mm height?

The 800 mm height is intended for very tall vehicles requiring full underbody access: buses, light trucks, commercial vans and modified vehicles with raised suspension. Standard models reach 330–508 mm, which is insufficient. The GRH 2/800HD is specialised for these segments.

Is the 145 mm minimum height a problem if I need to lift low cars?

Yes – the 145 mm minimum is higher than sports models, such as the 85 mm 330L. The GRH 2/800HD is not suitable for sports/lowered cars. It is designed for vehicles with normal or raised ride height. For low cars, use the 330L model.

Does the ultra-long 1180 mm frame make the jack difficult to store?

Yes – the frame is 650 mm longer than the 330L model, 530 mm, and 460 mm longer than the 2.5/510L model, 720 mm. It requires dedicated workshop space. If the workshop has narrow aisles, measure the available length before purchasing.

Is the integrated pedal more comfortable than the hydraulic handle on lighter models?

For extended work, yes. The pedal allows ergonomic foot control – the arms remain free for tools during lifting. During intensive cycles, 100+ lifts/month, the pedal reduces arm and wrist fatigue compared with a manual handle.

Is the 58 kg weight a problem compared with lighter models?

Yes – it is significantly heavier, compared with 8.8 kg for the 330 model, 10.9 kg for the 330L model and 29 kg for the 2.5/510L model. However, the GRH 2/800HD is semi-stationary equipment for high-volume workshops – it is not a tool for frequent transport. The 2 swivel wheels allow slow, controlled movement between stations.

Is the 120 mm platform necessary with an 800 mm height?

Yes. The larger platform, compared with 55–60 mm on lightweight models, distributes the load over the maximum surface area when lifting very tall vehicles up to 800 mm. The increased width reduces stress concentration at the contact point.

What maintenance does the GRH 2/800HD require?

Minimal but frequent maintenance during intensive cycles. Weekly inspection, if over 50 lifts/month: check oil pressure, cylinder integrity, pedal operation and rubber underbody protection. Oil replacement every 6 months with intensive cycles, over 150/month, or every 12 months with moderate cycles. Wheel lubrication every 3 months.