Bernardo 4-jaw lathe chuck M115 is a professional-grade lathe chuck, with a diameter of 115 mm, M 115 mount, and wide, reversible jaws. Krollit, official Bernardo distributor since 2007.
- Nominal diameter: 115 mm
- Mount thread: M 115
- Jaws: Wide, reversible
- Serration: Internal and external
- Material: Hardened steel
Who uses the 4-jaw lathe chuck M115 and for what
Machine shops and artisan turners use the 4-jaw lathe chuck M115 as a clamping accessory on metal lathes, ensuring secure clamping and centering of the workpiece during turning, drilling, and grooving operations.
Its place in the Bernardo range
The Bernardo 4-jaw lathe chuck M115 is part of Bernardo's range of lathe chucks, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.
Krollit logistics and support
Shipping 3-5 business days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who is the 4-jaw lathe chuck M115 for?
The 4-jaw lathe chuck M115 is recommended for the following professional profiles:
-
Machine shops and artisan turners: secure clamping of round or hexagonal workpieces on metal lathes during turning, drilling, and grooving operations.
-
Users with a Bernardo lathe with a compatible flange: original replacement or upgrade for Bernardo lathes (Profi, Hobby, etc.) with A2 mount conforming to DIN 55029.
-
Irregular or non-round workpieces: for non-symmetrically centered workpieces, consider independent 4-jaw chucks or universal platforms.
Technical specifications
| Nominal diameter |
115 mm |
| Mount thread |
M 115 |
| Material |
Hardened steel |
| Jaws |
Wide, reversible |
| Serration |
Internal and external |
Frequently asked questions
When to use a 4-jaw chuck?
Self-centering 4-jaw chucks are for square and 4-8 sided workpieces. The jaws move together with a single key.
The self-centering 4-jaw chuck (not independent jaws) clamps square or octagonal workpieces symmetrically. For off-center (eccentric, asymmetrical) clamping, independent jaw chucks are needed.
What material is the chuck body made of?
The material is indicated in the title: steel (PO series) for maximum precision, cast iron (DK/PS series) for standard use.
The choice depends on the intensity of use and the required tolerance: steel for production and precision, cast iron for general use.
Which diameter should I choose?
The choice of diameter depends on the lathe spindle nose (it must match the mounting) and the dimensions of the workpieces to be machined.
Typical diameters: 80-160 mm for hobby lathes, 200-315 mm for professional lathes, 400-630 mm for industrial lathes.
How do I check compatibility with my lathe?
Check the type of mounting on the lathe spindle nose (Camlock D3-D15, or threaded mount M-) and the corresponding diameter.
On modern lathes, Camlock mounting is the most common. Older lathes may have a threaded (M-) or flanged mount. The lathe's technical documentation indicates the exact type.
How is chuck precision maintained?
Regular cleaning of the spiral mechanism, periodic lubrication with specific chuck grease, concentricity check every 6 months with a dial indicator.
A jaw that moves with difficulty indicates chips or rust in the mechanism: disassemble, clean, and grease. Concentricity is checked by mounting a ground bar and measuring with a dial indicator: acceptable tolerance 0.03-0.1 mm depending on the model.
