Bernardo 4-jaw chuck DK12-200/D5 is a lathe chuck for professional use, with a diameter of 200 mm and a weight of 19 kg. Krollit, official Bernardo distributor since 2007.
- Chuck size: 200/D5
- D - Diameter: 200 mm
- Taper: 5
- D1 (max.): 82,578 mm
- D2: 104,8 mm
- D3: 60 mm
Who uses the DK12-200/D5 4-jaw chuck and for what
Mechanical workshops and artisan turners use the DK12-200/D5 4-jaw chuck as a clamping accessory on metal lathes, ensuring secure clamping and centering of the workpiece during turning, drilling, and grooving operations.
Its place in the Bernardo range
The Bernardo 4-jaw chuck DK12-200/D5 is part of Bernardo's range of lathe chucks, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for assistance with selection.
Krollit logistics and support
Shipping 3-5 working days from Krollit warehouse for spare parts and accessories. Customer assistance in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who is the DK12-200/D5 4-jaw chuck for?
The DK12-200/D5 4-jaw chuck is recommended for the following professional profiles:
-
Mechanical workshops and artisan turners: secure clamping of round or hexagonal workpieces on metal lathes during turning, drilling, and grooving operations.
-
Users with a Bernardo lathe with a compatible flange: original replacement or upgrade for lathes in the Bernardo range (Profi, Hobby, etc.) with an A2 mounting according to DIN 55029.
-
Irregular or non-round workpieces: for eccentrically asymmetrical workpieces, consider independent 4-jaw chucks or universal platforms.
Technical specifications
| Chuck size |
200/D5 |
| D - Diameter |
200 mm |
| Taper |
5 |
| D1 (max.) |
82.578 mm |
| D2 |
104.8 mm |
| D3 |
60 mm |
| H1 |
90 mm |
| Max speed |
2000 rpm |
| Weight approx. |
19 kg |
Frequently asked questions
When to use a 4-jaw chuck?
Self-centering 4-jaw chucks are for square and 4-8 sided workpieces. The jaws move together with a single key.
The self-centering 4-jaw chuck (not independent jaws) clamps square or octagonal workpieces symmetrically. For eccentric (asymmetrical) clamping, independent-jaw chucks are needed.
What material is the chuck body made of?
The material is indicated in the title: steel (PO series) for maximum precision, cast iron (DK/PS series) for standard use.
The choice depends on the intensity of use and required tolerance: steel for production and precision, cast iron for general use.
What workpieces is the Ø 200 mm diameter suitable for?
Suitable for medium workpieces (max. Ø ~220 mm): professional lathes.
The nominal diameter of the chuck indicates the maximum size of the body, not that of the machinable workpiece. The clamping capacity depends on the jaw opening (typically 60-70% of the nominal Ø).
What does the D5 mounting indicate?
The D5 code (Camlock according to DIN 55029) identifies the size of the lathe spindle nose: D3-D5 for small lathes, D6-D8 for medium, D11-D15 for industrial.
Check the mounting of your lathe before purchasing: the interface flange must exactly match the code. Camlock = quick clamping with cams, disassembly in 30 seconds without tools.
How is chuck accuracy maintained?
Regular cleaning of the spiral mechanism, periodic lubrication with specific chuck grease, concentricity check every 6 months with a dial indicator.
A jaw that moves with difficulty indicates chips or rust in the mechanism: disassemble, clean, and grease. Concentricity is checked by mounting a rectified bar and measuring with a dial indicator: acceptable tolerance 0.03-0.1 mm depending on the model.
