GÜDE RFS 200 Tile Cutter – 200 mm, wet cutting, 520 mm length
The Güde RFS 200 tile cutter allows for precise cutting of tiles using the wet cutting method without dust emission. Designed in Germany, it offers a blade diameter of 200 mm, a cutting length of 520 mm, an 800 W motor, and a 230 V single-phase power supply. It is distributed in Italy by Krollit as an official Güde dealer since 2007. Price on request, availability on request.
Tile cutter for tiles with the wet cutting method.
In the Krollit catalog, the Güde RFS 200 tile cutter represents a reliable solution for those who need precise cuts on ceramic tiles in professional or semi-professional environments. The wet cutting method, as opposed to dry cutting, dramatically reduces the dispersion of ultrafine silica dust compared to dry methods with diamond discs on grinders, and is therefore preferable in confined spaces (construction site offices, indoor boxes).
Italian customers primarily choose the RFS 200 tile cutter for three scenarios: first, professional tile layers working indoors who need clean cuts without dust dispersion; second, small finishing workshops that make angled cuts (45°-90°) for complex plating and coverings; third, restoration construction sites where minimizing silicate dust is a mandatory requirement for operator safety.
Unlike manual cutters (with pliers, cold tools), the tile cutter ensures millimeter linearity and smooth cutting surfaces, avoiding chipping on visible edges and micro-fractures that reduce the thermal resistance of installed tiles. Compared to portable 180 mm diamond disc systems, the RFS 200 tile cutter offers an integrated tank, a closed cooling cycle, and a rotating spindle on guides, elements that increase the consistency of cut quality, cut after cut.
Distinctive construction features
The 200 mm diamond blade mounted on a spindle supported by 4 ball bearings ensures reduced oscillations at 3000 nominal revolutions per minute. The integrated water cooling system with a dedicated suction pump and removable tank keeps the blade temperature below 80 °C even in continuous cycles, extending the useful life of the disc beyond 300 standard tiles (30×30 cm, 10 mm thick).
The cutting angle is adjustable without tools from 90° (orthogonal cut) to 45° (diagonal cut), with intermediate click stops. This feature allows for shaping tiles for angular finishes, suspended ceilings, and curved walls without manual pre-cutting.
The PRCD button (Portable Residual Current Device) is integrated into the body of the tile cutter: it is an electrical safety feature that instantly interrupts the circuit if leakage currents are detected, which is frequent in humid environments such as wet construction sites with water-filled pipes.
Logistics and Krollit after-sales support
Home delivery includes packaging, positioning on the floor, and dry start-up verification (does not include installation of the tank's water supply line). Krollit maintains original spare parts for wear parts: 200 × 25.4 mm diamond blade (code 55498), inner/outer flange, cooling pump.
Technical assistance in Italian covers pre-sales electrical diagnostics, water line configuration, and consultation on cutting cycles for different types of tiles (porcelain stoneware, single-fired, double-fired, marble). Manuals and technical sheets are available in Italian in both paper and PDF versions.
WHO THE GÜDE RFS 200 TILE CUTTER IS SUITABLE FOR
| Profile |
Suitable? |
Reason |
| Professional tile setter / small installation company |
Ideal |
Flawless 45° and 90° cuts, integrated tank, continuous water cooling allow 15-25 cuts/hour on standard 30×30 cm tiles. Complies with construction site safety standards on silicate dust reduction. |
| Finishing workshop / subcontracting work |
Ideal |
200 mm diamond blade covers formats up to 360 × 360 mm diagonally (Güde specifications). Stable spindle ensures chip-free surfaces. |
| Carpentry / interior finishing (residential) |
Adequate |
Suitable for occasional cuts of 5-10 tiles/day in indoor spaces. Wet method reduces operator dust exposure compared to dry disc. |
| Industrial construction site / continuous production 8+ hours |
Not indicated |
800 W (0.8 kW) motor is not sized for continuous shifts of 6-8 hours daily; risk of motor overheating and loss of RPM stability. For this application, an upgrade to a 1500 W stationary system with a motorized table is recommended. |
Not indicated for: processing large thickness slabs (40+ mm) except in very short sequences (3-4 cuts and then 10 min break); completely dry environments without stable water supply (the tank and pump require constant drainage); massive marble quarrying/stoning (different loads than tiles).
TECHNICAL SPECIFICATIONS
Cutting capacity
| Parameter |
Value |
| Maximum cutting length |
520 mm |
| Cutting depth at 90° (orthogonal) |
30 mm |
| Cutting depth at 45° (diagonal) |
25 mm |
| Admissible tile thickness |
Up to 25/30 mm |
| Maximum tile size (diagonal cut) |
360 × 360 mm |
Spindle and blade
| Parameter |
Value |
| Diamond blade diameter |
200 mm |
| Outer hole diameter (axis) |
25.4 mm |
| Number of ball bearing supports |
4 |
| Adjustable cutting angle |
90° – 45° (gradual, tool-free) |
| Spindle speed without load (rpm) |
3,000 rpm |
Motor and power supply
| Parameter |
Value |
| Motor power (P1 input) |
800 W |
| Power supply voltage |
230 V single-phase |
| Frequency |
50 Hz |
| Absorbed current (A) |
Approx. 3.5 A (theoretical value; check with manufacturer) |
| Integrated electrical protection |
PRCD (Portable Residual Current Device) |
Water cooling system
| Parameter |
Value |
| Cooling pump |
Included |
| Water collection tank |
Removable, approx. 15-18 L (Krollit estimate) |
| Fluid guide hose length |
Approx. 1 meter (spare part code 55374-01006) |
| Recirculation and drainage |
Closed cycle with floor drain |
Dimensions and weight
| Parameter |
Value |
| Length (L) |
830 mm |
| Depth (P) |
450 mm |
| Height (H) |
920 mm |
| Net weight |
27.7 kg |
| Gross weight (packaging) |
30 kg |
Logistical packaging
| Parameter |
Value |
| Packaging length |
890 mm |
| Packaging depth |
490 mm |
| Packaging height |
370 mm |
| Item code |
55374 |
| GTIN (barcode) |
4015671553744 |
Regulatory compliance
| Standard |
Status |
| CE – Machinery Directive 2006/42/CE |
Compliant |
| EN ISO 12100:2010 (General machine safety) |
Compliant |
| Declaration of conformity |
Available from Krollit upon request |
STANDARD EQUIPMENT
- Complete radial saw with base and supports
- Diamond blade 200 × 25.4 mm (mounted)
- Water cooling pump with 1 meter hose
- Removable water collection tank
- Inner and outer blade support flange
- Stop (positioning support) in aluminum
- Sliding guide for tile advancement
- 230V EU power cable with standard plug
- User manual in German; Italian translation available on request from Krollit
OPTIONAL ACCESSORIES AND SPARE PARTS
-
55374-01001 – Replacement water collection tank (for wear or accidental damage)
-
55498 – Diamond blade 200 × 25.4 mm (spare part, normal consumption ~300-400 tiles)
-
55374-01006 – Cooling fluid guide hose (spare for wear or leaks)
-
55374-01009 – Asynchronous motor 230V 800W (complete replacement)
-
553720114 – Cooling pump (spare for loss of thrust or cavitation)
-
55374-01005 – Adjustable angled support (spare for wear)
-
55374-01002 – PRCD differential switch (spare for repeated tripping)
-
55374-01003, 55374-01004 – Inner/outer flanges (spare for mounting damage)
All original Güde spare parts are available from Krollit with the original item code. Minimum order: quantity 1, delivery 7-10 days from Germany.
FREQUENTLY ASKED QUESTIONS
How does the wet method of the Güde RFS 200 work?
The diamond blade rotates constantly while an integrated pump circulates water in the tank below and along the perimeter of the blade. The water cools the blade to <80 °C, reduces silica dust (forming a slurry), and lubricates the blade-tile contact. No external water supply is needed: the tank collects and recirculates the same fluid (maximum floor drainage 1-2 L/hour).
What types of tiles can I cut with the RFS 200?
The machine cuts ceramic tiles (single-fired, double-fired, porcelain stoneware), marble, soft stone, slate up to 30 mm thick at 90° and 25 mm at 45°. It is not suitable for massive granite (>30 mm), reinforced concrete (reinforcement breaks the diamond), or tempered glass (risk of piece explosion).
What maintenance does it require?
Weekly check of the pump status (absence of unusual noises, constant flow). Monthly cleaning of the tank from sediments (silica sludge accumulates). Semi-annual lubrication of the spindle bearings with NLGI 2 grease (3-4 grams per bearing). Annual blade inspection: when the diamond starts to polish the cut instead of cutting, the blade is worn and must be replaced (code 55498).
What is the difference between this Güde and a portable hand-held circular saw?
The RFS 200 is stationary: it offers a stable spindle on 4 bearings (millimeter alignment), an integrated cooling system (closed cycle, no water leaks around the tank), and an adjustable angle without the use of tools. Portable systems are more compact but offer less cutting stability and difficult pressure control (risk of chipping). The RFS 200 is ideal for batches or jobs that require 10+ cuts/shift.
How do I protect myself from silicate dust during cutting?
The wet method of the RFS 200 drastically reduces airborne silica dust dispersion (up to 95% less than dry cutting). However, it is recommended to wear an FFP2 mask when changing the blade and cleaning the tank (accumulated sludge contains particulates). Use safety goggles for water splashes.
What is the difference between 45° and 90° cutting?
90° cut (orthogonal): tile fixed vertically to the plane, blade cuts perpendicularly. Maximum depth 30 mm. Used for standard tiles during installation, simple perimeter cuts.
45° cut (diagonal): tile is positioned at an angle or blade is tilted by 45°. Maximum depth 25 mm (due to blade geometry). Used for shaped tiles on sharp edges (balconies, thresholds, acute wall corners).
What is the Krollit warranty on this machine?
Güde offers a 2-year manufacturer's warranty. Krollit offers: unlimited free telephone/email technical assistance; pre-sales diagnostic support; claims management in Italy without repatriation to Germany.
How do I order spare parts and accessories?
All original Güde spare parts are available from Krollit with the Güde item code. Examples: diamond blade 55498.
Contact the Krollit commercial team for orders, lead times, and stock availability.
Does the RFS 200 comply with European safety standards?
Yes. The machine features: CE marking (Machinery Directive 2006/42/CE), integrated PRCD switch for protection against electrical leakage in humid environments, downloadable declaration of conformity. Consult the user manual for information on recommended PPE (Personal Protective Equipment): FFP2 mask, goggles, non-slip footwear with steel toe cap.
