Guede GTB 16/605 is a pillar drill for professional use, with speeds of 630–2700 rpm, a 600 W motor, and a weight of approx. 18–20 kg. Krollit, official Guede distributor since 2007.
- Voltage: 230 V
- Frequency: 50 Hz
- Motor power: 600 W
- Operating mode: S1
- Spindle stroke: 60 mm
- Spindle speed: 630–2700 rpm
Who uses the GTB 16/605 and for what
Mechanical workshops and metalworking shops use the GTB 16/605 for precision drilling on steel and cast iron, tapping with a tapping chuck, and repetitive work on pieces of various sizes.
Its place in the Guede range
The Guede GTB 16/605 is part of the Guede pillar drill range, distributed in Italy by Krollit since 2007. The Guede range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Guede catalog on Krollit or contact customer support for assistance with selection.
Krollit logistics and support
Machine shipping in 5-9 working days (7 days to the South). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Customer support in Italian available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.
Who is the GTB 16/605 for?
The GTB 16/605 is recommended for the following professional profiles:
-
Mechanical workshops and metalworking: precision drilling on steel and cast iron, tapping with a tapping chuck.
-
Maintenance workers and repair shops: repetitive drilling work on pieces of various sizes.
-
Occasional hobbyist use: professional machine: for home use, consider compact bench models.
Spindle, tools and speed
| Spindle speed |
630–2700 rpm |
| Number of speeds |
5 |
| Spindle taper |
B16 |
| Taper attachment |
MK2 |
| Spindle clamping range |
1–16 mm |
| Spindle–table distance |
290 mm |
| Spindle–base distance |
415 mm |
Table, dimensions and geometry
| Column diameter |
60 mm |
| Total height |
850 mm |
| Weight |
approx. 18–20 kg |
| Cable length |
2 m – H05VV-F |
Motor and power supply
| Voltage |
230 V |
| Frequency |
50 Hz |
| Motor power |
600 W |
Other specifications
| Operating mode |
S1 |
| Table (WxD) |
200 x 200 mm |
| Base (WxD) |
235 x 355 mm |
| Noise LWA |
75 dB(A) |
| Protection class |
I |
| Spindle stroke |
60 mm |
Frequently asked questions
What is the drilling capacity of the GTB 16/605?
See the "Drilling capacity" data in the machine's technical table.
The capacity refers to standard unhardened steel. On harder materials or alloyed steels, the actual capacity may be lower: reduce speed and feed to avoid stressing the spindle and tools.
How do I adjust the spindle speed?
Via mechanical belt or gear change in stepped models, via inverter or variator in Vario models.
Vario models allow continuous adjustment, while stepped models require moving the belt to different pulleys. Correct speed selection based on drill bit diameter and material extends tool life.
What spindle taper and type of tools does it support?
See "Spindle taper" in the technical table: typically MT 2, MT 3 or MT 4 depending on the model.
MT (Morse Taper) tapers are international standards and accessories (arbors, keyless chucks, reductions) are commonly available on the market. Krollit supplies original Bernardo accessories.
Does the drill allow tapping with a tapping chuck?
Only models with right/left rotation as standard allow tapping with automatic tap release.
Check the "Right/left rotation" or "Tapping" specification: drills without mechanical reversal are not suitable for repetitive tapping.
What is the weight of the machine and what installation does it require?
The weight varies from about 25 kg (compact bench models) to over 250 kg (industrial Profi models).
Bench models are installed on a sturdy bench, while pillar or radial models require floor fixing with expansion anchors for stability during drilling.
