Flott Turbo Drill is a professional pillar drill, with speeds of 100 – 10,000 rpm, a 0.54 kW motor, and a weight of 44 kg. Krollit, official Flott distributor since 2007.
- Power supply: 230 V three-phase frequency controlled
- Motor power: 0.54 kW
- Drilling capacity (steel E335/ST60): 6 / 8 mm
- Tapping capacity: M5
- Spindle: B12
- Drilling depth: 60 mm
Who uses the Turbo Drill and for what
Mechanical workshops and metalworking shops use the Turbo Drill for precision drilling on steel and cast iron, tapping with a tapping chuck, and repetitive work on pieces of various sizes.
Its place in the Flott range
The Flott Turbo Drill is part of the Flott pillar drill range, distributed in Italy by Krollit since 2007. The Flott range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Flott catalog on Krollit or contact customer support for selection assistance.
Krollit logistics and support
Machine shipping in 5-9 working days (7 days to the South). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Customer support in Italian available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.
Who is the Turbo Drill for?
The Turbo Drill is recommended for the following professional profiles:
-
Mechanical workshops and carpentry: precision drilling on steel and cast iron, tapping with a tapping chuck.
-
Maintenance workers and repair shops: repetitive drilling work on pieces of various sizes.
-
Occasional hobby use: professional machine: for home use, consider compact bench models.
Machining capacity
| Drilling capacity (steel E335/ST60) |
6 / 8 mm |
| Tapping capacity |
M5 |
| Drilling depth |
60 mm |
| Depth indicator |
Digital |
Spindle, tools and speed
| Spindle |
B12 |
| Spindle speed |
100 – 10,000 rpm |
| Spindle/surface distance |
140 – 315 mm |
| Speed indicator |
Digital OLED |
Table, dimensions and geometry
| Column diameter |
70 mm |
| Work surface (L × W) |
300 × 250 mm |
| Machine dimensions |
320 × 520 × 820 mm |
| Weight |
44 kg |
| Drill head height adjustment |
Manual |
Other specifications
| Projection |
220 mm |
| T-slots |
2 transverse / 14–26 mm |
| Standard |
DIN EN 55011:2016 + A1:2017 |
| Warranty |
3 years (single shift use) |
| Power supply |
230 V three-phase frequency controlled |
| Motor power |
0.54 kW |
Frequently Asked Questions
What is the drilling capacity of the Turbo Drill?
See the "Drilling capacity" data in the machine's technical table.
The capacity refers to standard, unhardened steel. On harder or alloyed materials, the actual capacity may be lower: reduce speed and feed to avoid stressing the spindle and tools.
How is the spindle speed adjusted?
Via mechanical belt or gear change in stepped models, via inverter or variator in Vario models.
Vario models allow continuous adjustment, while stepped models require moving the belt to different pulleys. Correct speed selection based on drill bit diameter and material extends tool life.
What spindle taper and type of tools does it support?
See "Spindle taper" in the technical table: typically MT 2, MT 3, or MT 4 depending on the model.
MT (Morse Taper) tapers are international standards, and accessories (arbors, keyless chucks, reductions) are commonly available on the market. Krollit supplies original Bernardo accessories.
Does the drill allow tapping with a tapping chuck?
Only models with standard right/left rotation allow tapping with automatic tap release.
Check the "Right/left rotation" or "Tapping" specification: drills without mechanical reversal are not suitable for repetitive tapping.
What is the weight of the machine and what installation does it require?
The weight varies from approximately 25 kg (compact bench models) to over 250 kg (industrial Profi models).
Bench models are installed on a sturdy workbench, while pillar or radial models require floor mounting with expansion anchors for stability during drilling.
