Bernardo Hydraulic Bandsaw Tension for MSB 320 H / HL / HG / HGL is a cutting tool for professional use available at Krollit, official Bernardo distributor since 2007.
- MSB 320 H
- MSB 320 HL
- MSB 320 HG
- MSB 320 HGL
Who uses the Hydraulic Bandsaw Tension for MSB 320 H / HL / HG / HGL and for what
Mechanical workshops and tool shops use the Hydraulic Bandsaw Tension for MSB 320 H / HL / HG / HGL for cutting, drilling or sharpening operations on materials compatible with the tool's geometry.
Its place in the Bernardo range
Bernardo Hydraulic Bandsaw Tension for MSB 320 H / HL / HG / HGL is part of the Bernardo cutting tool range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performance: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.
Krollit Logistics and Support
Shipping 3-5 business days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who is the Hydraulic Bandsaw Tension for MSB 320 H / HL / HG / HGL for
The hydraulic bandsaw tension for MSB 320 H / HL / HG / HGL is recommended for the following professional profiles:
-
Mechanical workshops and tool shops: cutting and sharpening operations on compatible materials.
-
Users with compatible machine: original spare part or tool for the indicated machine.
-
Out-of-spec materials: check machinable material and tool geometry before use.
Frequently asked questions
Which machine is this set compatible with?
This set is an original spare part for the Bernardo MSB 320 H, a semi-automatic bandsaw.
The MSB 320 H has a cutting capacity of up to Ø 320 mm. Please check the exact model of the machine before purchasing the spare part to ensure correct compatibility.
What materials can the MSB 320 H cut?
The MSB 320 H is a semi-automatic bandsaw suitable for carpentry workshops and mechanical workshops. H series hydraulic with hydraulic vice and rotating platform for angle cuts.
On stainless steel and hardened materials, the nominal capacity can be reduced by 30-40%. For series production on normal ferrous materials, original Bernardo blades offer the expected operating life.
Are the blades made of hardened steel?
Yes, Bernardo blades for the MSB series are made of high-quality hardened and ground steel.
Heat treatment increases surface hardness (typically 58-62 HRC) and resistance to deformation, even when cutting stainless steel or thick aluminum.
When should the blades be replaced?
Blades should be replaced when the cut is no longer clean, has burrs, or requires excessive effort. The frequency depends on the intensity of use and the materials cut.
Indicators of wear: burred cut, deformation of the blade edge, abnormal sparks, altered noise during cutting. For intensive use, a review every 6 months and preventive replacement every 12-18 months is recommended.
How are they stored and maintained?
Store blades in a dry place, lightly oiled to prevent oxidation. Do not store with cutting edges in contact.
Clean after use with a dry cloth, apply a protective oil film (e.g., WD-40 or machine oil). Periodically check for chips and correct tension of the fastening screws.
