The Flott HBS 250 A is a professional metal bandsaw, weighing 390 kg. Krollit has been an official Flott distributor since 2007.
- Motor: Three-phase 400 V, 1.5 kW
- Blade dimensions: 2910 x 27 x 0.9 mm
- Flywheel diameter: 325 mm
- Cutting speed: 20–120 m/min
- Span (opening): 320 mm / 12.60"
- Working height: 760 mm
Who uses the HBS 250 A and for what
Mechanical workshops and metalworking shops use the HBS 250 A for cutting steel, aluminum, and cast iron profiles and bars, with raw material sectioning before turning or milling.
Its place in the Flott range
The Flott HBS 250 A is part of the Flott range of metal bandsaws, distributed in Italy by Krollit since 2007. The Flott range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Flott catalog on Krollit or contact customer support for selection assistance.
Krollit logistics and support
Machine shipping in 5-9 working days (7 days to the South). For spare parts and accessories, shipping 3-5 working days from Krollit warehouse. Customer support in Italian available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.
Who is the HBS 250 A for
The HBS 250 A is recommended for the following professional profiles:
-
Mechanical workshops and metalworking shops: cutting steel profiles and bars with acceptable tolerance for subsequent processing.
-
Turners and industrial maintenance technicians: sectioning raw materials before turning or milling.
Not suitable for: precision cutting on thin sheets (for thin sheets, consider hydraulic shears or circular metal saws).
Table, dimensions, and geometry
| Working height |
760 mm |
| Machine dimensions |
1480 x 1700 x 2000 mm |
| Weight |
390 kg |
Other specifications
| Flywheel diameter |
325 mm |
| Span (opening) |
320 mm / 12.60" |
| Material stop |
500 mm with scale |
| Colors |
RAL 7035 / RAL 7005 |
| Warranty |
12 months (single shift) |
| Cooling |
Electric pump |
| Cutting speed |
20–120 m/min |
| Cutting radius |
0°–60° right / 45° left |
| Blade dimensions |
2910 x 27 x 0.9 mm |
| Motor |
Three-phase 400 V, 1.5 kW |
Frequently Asked Questions
What can the HBS 250 A cut?
Profiles, tubes, solid bars, and rolled steel, aluminum, and cast iron within the indicated section limits.
Cutting capacity is expressed in mm of maximum section for round, square, and rectangular profiles. For extra-hard materials, reduce band speed and use blades with appropriate tooth pitch.
What type of blade does it require?
Bimetal blade for cutting steel, carbon steel blade for soft metals.
Krollit supplies original Bernardo blades in various tooth pitches to optimize cutting based on material type and thickness.
What cutting speed does it offer?
See "Band speed" in the technical table: typically adjustable in 2-4 steps or continuously (Vario).
Low speeds (15-30 m/min) for alloy steels, high speeds (50-80 m/min) for light alloys and aluminum. Incorrect selection accelerates blade wear.
Does it have integrated cooling?
Professional models are equipped with a cooling pump with a collection tank and drip tray.
Cooling (with cutting oil or emulsion) extends blade life and improves cutting quality on hard materials. For dry cutting, use specific blades.
How much does it weigh and how is it installed?
See "Weight" in the technical table: industrial models weigh from 150 to over 400 kg.
Saws over 200 kg require adequate flooring and anchoring. The machine must be positioned in a clear space for handling long profiles.
