The Bernardo PHW 1.0 LOW-35 manual pallet truck is the compact model of the low-fork family, with a capacity of 1000 kg and a fork length of 1120 mm. Technical specifications: fork width 160 mm, minimum fork height 35 mm, maximum lifting height 90 mm, distance between forks 210 mm, steering angle 102.5°. Manual hydraulic pump, net weight 64 kg. Distributed in Italy by Krollit as an official Bernardo distributor since 2007.
-
Capacity: 1000 kg
-
Fork length: 1120 mm
-
Fork width: 160 mm
-
Fork height (min/max): 35 / 90 mm
-
Distance between forks: 210 mm
-
Overall width: 530 mm
-
Steering angle: 102.5°
-
Steering wheel: Ø 160 × 50 mm
-
Load wheel: Ø 34 × 68 mm
-
Weight: 64 kg
Who uses the PHW 1.0 LOW-35 and for what
The Bernardo 1.0 LOW-35 low-fork pallet truck is designed for handling low-profile pallets and low-height Euro pallets. Key design feature: the minimum fork height of only 35 mm allows insertion under low-base pallets (e.g., pressed pallets with a domed base, Euro pallets with lower planks, low-profile containers) where standard pallet trucks with a fork height of 85+ mm cannot enter. The maximum lifting height is limited to 90 mm: designed for horizontal load transport, not for stacking or high-level storage. Standard manual hydraulic pump: the operator lifts the load by lowering the lever and transports it on wheels. Suitable for: warehouses with low-base pallets, e-commerce activities with low-profile pallets for small packages, food sector with low bins and containers, textile/footwear sector with boxes stacked on low pallets, logistics activities with a variety of pallets (standard + low-profile breaks). Not interchangeable with standard pallet trucks when pallet heights below 90 mm make fork insertion impossible.
Its place in the Bernardo range
The Bernardo range of manual and semi-electric pallet trucks is organized into 5 main sub-families: LOW (PHW 1.0 LOW-35 and PHW 1.5 LOW-51) for low-profile pallets with fork heights of 35-51 mm; STANDARD (PHW 2.5 P) for general use 2,500 kg; LONG (PHW 2.0 L-1800/2000/2500) for double pallets and long loads with extended fork lengths; SEMI_ELECTRIC (PHW 1.5 semi-electric) with electric lifting and manual translation; HEAVY (PHW 5.0 S) for heavy industrial loads up to 5,000 kg. The PHW 1.0 LOW-35 is the most compact version of the LOW family (31 mm fork height at rest, max 90 mm lift): designed exclusively for handling low-profile pallets with loads up to 1,000 kg. For low-profile pallets with loads of 1,500 kg, the PHW 1.5 LOW-51 with a higher fork height is required.
Krollit logistics and support
Bernardo shipping in 5-9 working days (7 days for Southern Italy). Manageable weight by two people with care. Compact overall dimensions, manageable in any warehouse or workshop. Original Bernardo spare parts (steering wheels, load wheels, complete hydraulic pump, operating lever, seals, and hydraulic cylinders) available from stock with 3-5 working day shipping. Customer support available in Italian.
Who is the PHW 1.0 LOW-35 for?
| Profile |
Compatibility |
Reason |
| Warehouse with low-profile pallets or pressed pallets with a domed base |
Recommended |
Minimum fork height of 35 mm allows insertion under low pallets where standard pallet trucks (85 mm) cannot enter. |
| Food / textile / e-commerce sector with low bins and containers |
Recommended |
Handling loads on low-profile containers, up to 1000 kg capacity. |
| Warehouse with standard Euro pallets (bottom height > 90 mm) |
Suitable |
For standard pallets, the PHW 2.5 P (higher capacity 2,500 kg, lower machine weight) is correctly sized. LOW models are only justified for low pallets. |
Not suitable for: pallets with a completely flat base without gaps (forks require minimum clearance underneath for insertion); high racking storage (90 mm lift height is insufficient, electric forklifts are needed); loads exceeding 1000 kg capacity; handling over long distances (over 30 meters) with high frequency.
Load Capacity
| Specification |
Value |
| Capacity |
1000 kg |
Forks
| Specification |
Value |
| Fork length |
1120 mm |
| Single fork width |
160 mm |
| Distance between forks |
210 mm |
| Overall width |
530 mm |
| Fork height at rest |
31 mm |
| Minimum fork height |
35 mm |
| Maximum lifting height |
90 mm |
Maneuverability
| Specification |
Value |
| Steering angle |
102.5° |
| Steering wheel |
Ø 160 × 50 mm |
| Load wheel |
Ø 34 × 68 mm |
Weight
| Specification |
Value |
| Net weight |
64 kg |
Compliance
| Specification |
Value |
| Marking |
CE |
| Directive |
Machinery 2006/42/CE |
Standard Equipment
- Bernardo PHW 1.0 LOW-35 Pallet Truck
- Integrated hydraulic pump
- Operating and steering lever
- Polyurethane steering and load wheels
- User manual in Italian
Frequently Asked Questions
What minimum fork height is needed for low-profile pallets?
The PHW 1.0 LOW-35 has a minimum fork height of 35 mm at rest: designed for pallets with a domed base or pressed pallets with a bottom height below 90 mm where standard pallet trucks cannot enter.
Common types of low-profile pallets: plastic domed-base pallets (bottom height 50-70 mm), recycled wood pressed pallets (bottom height 60-80 mm), low-profile containers for food goods (grip height 40-60 mm), low-base industrial bins (grip height 50-70 mm). For each type, check the available height under the pallet before purchase: the PHW 1.0 LOW-35 reaches 35 mm, the PHW 1.5 LOW-51 reaches 51 mm. For pallets with a bottom height below 35 mm, alternative solutions are required (horizontally sliding fork pallet trucks, ramps, manual lifts).
Is the 1000 kg capacity adequate for intensive use?
Yes, for normal daily use, no for constant overloading. The indicated capacity refers to the maximum load uniformly distributed on the forks: for concentrated or unbalanced loads, the actual capacity is lower.
In daily use, the nominal capacity can be used regularly without degradation of the machine, provided the load is uniformly distributed and lifting is performed with the pallet fully inserted onto the forks. Constant overloads (over 110% of the nominal capacity) accelerate wear of the hydraulic pump, lifting cylinders, and frame structure. For activities with loads close to the limit, a 20% safety margin is recommended: for daily 1,200 kg loads, a pallet truck with a 1,500 kg capacity is preferable; for daily 2,000 kg loads, the PHW 2.5 P, etc.
Does the 90 mm lifting height allow for storage in racks?
No. The 90 mm lifting height is designed for transporting the pallet above the floor, not for high-level storage.
Manual pallet trucks (LOW, STANDARD, LONG, HEAVY) are designed exclusively for horizontal handling: lifting serves to lift the pallet off the floor during transport over uneven surfaces, not to insert pallets into racks. For storage in racks, electric forklifts with lifts up to 3-6 meters high, battery or industrial gas powered, with a traction motor and operating license (Category K forklifts) are required.
Can low forks fit under any pallet?
No. The forks of the PHW 1.0 LOW-35 (35 mm at rest) fit under pallets with a minimum bottom height greater than that. For completely flat pallets without bottom space (e.g., custom full-base pallets), the forks cannot be inserted.
Pre-purchase verification recommended: measure the available height under a representative pallet for your use, from the floor to the bottom surface of the supporting board. For standard Euro pallets, the bottom height is typically 100 mm (compatible with all pallet trucks); for low-profile pallets, 50-90 mm (LOW models needed); for completely flat pallets without bottom space, forks cannot be inserted (alternative solutions needed).
Are they compatible with standard Euro pallets?
Yes. The forks of the PHW LOW are dimensioned (fork width 160 mm, distance between forks 210-220 mm) for insertion into the standard openings of Euro pallets (1,200 × 800 mm with 4-way access and 100 × 145 mm openings).
The standard ISO Euro pallet has standardized side and front access openings. The forks of the PHW LOW fit regularly into the front openings (short side 800 mm) for standard handling. For use with Euro pallets, the choice between the LOW and standard model depends on the pallet's bottom height: if the base is regular (100 mm), a PHW 2.5 P is the correct choice; if the base is domed or low-profile (below 90 mm), LOW models are necessary.
