{"product_id":"ujk-parf-guide-system-mkii-sistema-foratura-piano-multifunzione","title":"UJK Parf Guide System MkII Multi-Function Drilling System","description":"\u003cp\u003eThe UJK Parf Guide System MkII is a multifunctional workbench hole drilling system for hobbyist and professional use, featuring two 1,000mm stainless steel rules with holes spaced 96mm apart, a 20mm carbide drill bit, and precision comparable to CNC machining. Manufactured in the UK, the UJK brand was founded by Axminster Tools in 2012. Distributed in Italy by Krollit, official Record Power distributor since 2007.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRule length: 1,000 mm each (2 pieces)\u003c\/li\u003e\n  \u003cli\u003eMain hole spacing: 96 mm\u003c\/li\u003e\n  \u003cli\u003eIntermediate hole spacing: 32 mm and 48 mm\u003c\/li\u003e\n  \u003cli\u003eFinal hole diameter: 20 mm\u003c\/li\u003e\n  \u003cli\u003ePilot drill bit: 3 mm (1\/4\" hex shank, Festool Centrotec compatible)\u003c\/li\u003e\n  \u003cli\u003eFinal drill bit: 20 mm carbide with 3 mm pilot guide\u003c\/li\u003e\n  \u003cli\u003eRule material: Stainless steel with anti-glare satin finish\u003c\/li\u003e\n  \u003cli\u003eDrill guides: Hardened steel self-lubricating bushings with chip ejection holes\u003c\/li\u003e\n  \u003cli\u003eRecognition: The King's Award for Enterprise 2023 (innovation category)\u003c\/li\u003e\n  \u003cli\u003eCountry of manufacture: United Kingdom (Axminster, Devon)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho uses the Parf Guide System MkII and for what\u003c\/h3\u003e\n\u003cp\u003eThe system is used by woodworkers, bench joiners, and jig builders who create custom multifunctional worktops, portable cutting stations, and assembly surfaces with a 20mm grid. In Italy, it is primarily used by furniture makers who work with track saws (Festool, Makita, DeWalt) and require repeatable 90° and 45° cuts without an auxiliary square. It is also suitable for building school laboratory tables or compact woodworking benches in small spaces, where a custom pre-drilled top replaces a commercial multifunctional top at a significantly lower cost.\u003c\/p\u003e\n\n\u003ch3\u003eIts place in the UJK range\u003c\/h3\u003e\n\u003cp\u003eThe MkII is the updated version of the original Parf Guide System (MkI). Compared to the MkI, the MkII introduces self-lubricating hardened steel bushings that prevent direct contact between the 3mm drill bit and the rule, eliminating progressive wear on the holes. It adds two drill guides instead of one, the holes on the rules increase from 3mm to 6mm, and it introduces the possibility of 32mm and 48mm grid spacing. The PLUS version includes the Parf protractor for angled holes from 0° to 90° in 0.5° increments.\u003c\/p\u003e\n\n\u003ch3\u003eKrollit logistics and support\u003c\/h3\u003e\n\u003cp\u003eShipping 3-5 business days from Krollit warehouse, Monteforte Irpino (AV). Technical assistance in Italian at +39 0825-1494022.\u003c\/p\u003e\n\n\u003ch3\u003eWho the Parf Guide System MkII is for\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWoodworker with track saw\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eAllows 90° and 45° cuts with guide positioned on 20mm bench dogs, without auxiliary square\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHobbyist with portable router or plunge saw\u003c\/td\u003e\n\u003ctd\u003eSuitable\u003c\/td\u003e\n\u003ctd\u003eThe 20mm grid with 96mm spacing provides clamping points every 96mm across the entire bench surface\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eIndustrial production with CNC machining centers\u003c\/td\u003e\n\u003ctd\u003eNot suitable\u003c\/td\u003e\n\u003ctd\u003eThe system operates on manually drillable surfaces (MDF, HDF, plywood); it does not replace CNC programming for panel series\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e solid hard wood surfaces (oak, beech, walnut) where the 20mm carbide drill bit requires controlled feed not compatible with manual plunge drilling; not recommended for those who work exclusively on pre-drilled commercial panels without the need to customize the grid.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ch3\u003eRules and grid geometry\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRule length\u003c\/td\u003e\n\u003ctd\u003e1,000 mm (x2)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMain hole spacing\u003c\/td\u003e\n\u003ctd\u003e96 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eIntermediate hole spacing\u003c\/td\u003e\n\u003ctd\u003e32 mm and 48 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePilot hole diameter\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFinal hole diameter\u003c\/td\u003e\n\u003ctd\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRule material\u003c\/td\u003e\n\u003ctd\u003eStainless steel, anti-glare satin finish\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMetric scale on rule\u003c\/td\u003e\n\u003ctd\u003ePresent on one side\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDrill bits and guides\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePilot drill bit\u003c\/td\u003e\n\u003ctd\u003e3 mm, 1\/4\" hex shank\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePilot drill bit compatibility\u003c\/td\u003e\n\u003ctd\u003e1\/4\" hex systems including Festool Centrotec\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFinal drill bit\u003c\/td\u003e\n\u003ctd\u003e20 mm carbide with integrated 3 mm pilot guide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDrill guides included\u003c\/td\u003e\n\u003ctd\u003e2 hardened steel guides with self-lubricating bushing\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAvailable guide depths\u003c\/td\u003e\n\u003ctd\u003e1.5 mm and 3 mm (for rule overlap)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOrigin and recognition\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUnited Kingdom (Axminster, Devon)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDesigner\u003c\/td\u003e\n\u003ctd\u003ePeter Parfitt in collaboration with Axminster Tools\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eUJK Technology, founded 2012\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRecognition\u003c\/td\u003e\n\u003ctd\u003eThe King's Award for Enterprise 2023, innovation category\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eStandard equipment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2 x 1,000 mm MkII stainless steel rules\u003c\/li\u003e\n  \u003cli\u003e2 x MkII hardened steel drill guides with self-lubricating bushing\u003c\/li\u003e\n  \u003cli\u003e3 mm pilot drill bit with holder (1\/4\" hex shank)\u003c\/li\u003e\n  \u003cli\u003e3 reference pins with knurled collar\u003c\/li\u003e\n  \u003cli\u003eGuide block\u003c\/li\u003e\n  \u003cli\u003eDust extraction adapter\u003c\/li\u003e\n  \u003cli\u003e2 low-profile bench dogs\u003c\/li\u003e\n  \u003cli\u003e20 mm carbide drill bit with 3 mm pilot guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProfessional applications\u003c\/h3\u003e\n\u003ch3\u003eBuilding custom multi-functional worktops\u003c\/h3\u003e\n\u003cp\u003eWith the two rules overlapped at 90° and the reference pins, the system creates a 20mm hole grid with 96mm spacing on any MDF or HDF panel in less than 30 minutes. The Pythagorean basis of the layout eliminates the accumulation of progressive errors that would occur with manual point-by-point measurement. The result is a grid with precision comparable to CNC machining, usable with bench dogs, saw guides, and clamping systems for 90° and 45° cuts.\u003c\/p\u003e\n\u003ch3\u003eExtending or replicating an existing multi-functional worktop\u003c\/h3\u003e\n\u003cp\u003eWith the grid expansion reference dogs (optional accessory), the rules align with the existing 20mm holes on an existing multi-functional worktop, allowing the grid to be extended onto a second panel with millimeter accuracy compared to the original layout. This is relevant for those building modular side-by-side cutting stations or replacing a worn-out top of a commercial multi-functional table.\u003c\/p\u003e\n\n\u003ch3\u003eComparison with Parf Guide System MkI\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eMkI\u003c\/th\u003e\n\u003cth\u003eMkII\u003c\/th\u003e\n\u003cth\u003eWhen to choose the MkII\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\u003ctd\u003eFo\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Ujk","offers":[{"title":"Default Title","offer_id":53006563770696,"sku":"104779","price":261.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0891\/2139\/0920\/files\/ujk-parf-guide-system-mkii-dotazione-completa.webp?v=1777466532","url":"https:\/\/www.krollit.com\/products\/ujk-parf-guide-system-mkii-drilling-system-piano-multifunction","provider":"Krollit","version":"1.0","type":"link"}