Record Power DS300 is a professional disc sander, with a 750 W (1 HP) motor, weighing 33 kg. Krollit, official Record Power distributor since 2007.
- Disc diameter: 305 mm (12”)
- Table size: 435 × 165 mm
- Table tilt: 0° – 45°
- Disc speed: 1,420 rpm
- Motor: 230 V / 50 Hz
- Motor power: 750 W (1 HP)
Who uses the DS300 and for what
Mechanical workshops and metalworking shops use the DS300 for sanding and satin finishing stainless steel, aluminum, and alloys, removing burrs and finishing surfaces.
Its place in the Record Power range
The Record Power DS300 is part of the Record Power disc sander range, distributed in Italy by Krollit since 2007. The Record Power range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Record Power catalog on Krollit or contact customer support for selection assistance.
Krollit Logistics and Support
Machine shipping in 5-9 working days (7 days for Southern Italy). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Customer support in Italian is available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.
Who the DS300 is for
The DS300 is recommended for the following professional profiles:
-
Mechanical workshops for metal finishing: sanding and satin finishing of stainless steel, aluminum, and alloys.
-
Metalworking shops and production workshops: burr removal, deburring of cuts, and surface finishing.
Not suitable for: mirror polishing chrome (dedicated polishing machines with abrasive pastes are needed for final chrome finishes).
Table, dimensions and geometry
| Table size |
435 × 165 mm |
| Table tilt |
0° – 45° |
| Weight |
33 kg |
| Dimensions (L × W × H) |
510 × 450 × 400 mm |
Motor and power supply
| Motor |
230 V / 50 Hz |
| Motor power |
750 W (1 HP) |
| Current draw |
4.5 A |
| Sound power level |
< 85 dB(A) |
| Sound pressure level |
< 85 dB(A) |
Other specifications
| Disc diameter |
305 mm (12”) |
| Disc speed |
1,420 rpm |
| Dust extraction port diameter |
57 – 63.5 mm (2.5”) |
| Disc material |
Cast iron |
Frequently Asked Questions
What can the DS300 sand?
Stainless steel, aluminum, metal alloys, and (in some models) even wood with appropriate abrasive belts.
For each material, a specific belt grit is used: 60-80 for roughing, 120-180 for finishing, 240+ for pre-polishing.
What abrasive belt sizes does it use?
See "Belt size" in the technical table: typically from 75x2,000 mm to 150x2,500 mm.
Belts are consumable spare parts: Krollit supplies original Bernardo belts in various grit sizes to optimize finishing.
Is the belt speed adjustable?
Professional models offer Vario or multi-step speeds (typically 4-8 steps).
High speeds (>20 m/s) for stainless steel and finishing, low speeds (<10 m/s) for wood and soft materials to avoid burning.
Does it have integrated dust extraction?
Professional models offer a dust extraction port for grinding dust.
Dust extraction is essential for stainless steel (respirable dust) and for wood (fire risk from sparks). Check the port diameter for connection to a centralized system.
How much does the machine weigh?
See "Weight" in the technical table: typically 50-200 kg for benchtop and pillar models.
Pillar models require floor mounting; benchtop models are installed on a sturdy workbench of adequate size.
