Record Power BDS250 - Professional Belt and Disc Sander is a sander for professional use, weighing 47 kg. Krollit, official Record Power distributor since 2007.
- Belt dimensions: 152 × 1219 mm
- Disc diameter: 254 mm
- Disc table tilt: 0 – 45°
- Belt tilt: 0 – 90°
- Disc speed: 1,400 min⁻¹
- Belt speed: 517 m/min
Who uses the BDS250 - Professional Belt and Disc Sander and for what
Mechanical workshops and metalworking shops use the BDS250 - Professional Belt and Disc Sander for sanding and brushing stainless steel, aluminum, and alloys, removing burrs and finishing surfaces.
Its place in the Record Power range
The Record Power BDS250 - Professional Belt and Disc Sander is part of the Record Power range of sanders, distributed in Italy by Krollit since 2007. The Record Power range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Record Power catalog on Krollit or contact customer service for selection support.
Krollit logistics and support
Machine shipping in 5-9 working days (7 days to the South). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Customer assistance in Italian available for technical documentation, product sheets and spare parts order management. Krollit has been an official distributor since 2007.
Who is the BDS250 - Professional Belt and Disc Sander for
The BDS250 - professional belt and disc sander is recommended for the following professional profiles:
-
Mechanical workshops for metal finishing: sanding and brushing stainless steel, aluminum, and alloys.
-
Metalworking shops and production laboratories: deburring, removing cutting burrs, and surface finishing.
Not suitable for: mirror polishing chrome (for final chrome plating, dedicated polishers with abrasive pastes are needed).
Table, dimensions and geometry
| Belt dimensions |
152 × 1219 mm |
| Disc table tilt |
0 – 45° |
| Belt tilt |
0 – 90° |
| Weight |
47 kg |
Other specifications
| Disc diameter |
254 mm |
| Noise level (no load) |
78 dB(A) |
| Noise level (under load) |
84.2 dB(A) |
| Disc speed |
1,400 min⁻¹ |
| Belt speed |
517 m/min |
| Current draw |
6.7 A |
| Motor |
230 V / 50 Hz / 1 HP / 800 W |
Frequently Asked Questions
What can the BDS250 - Professional Belt and Disc Sander sand?
Stainless steel, aluminum, metal alloys and (in some models) even wood with suitable abrasive belts.
For each material, a specific belt grit is used: 60-80 for roughing, 120-180 for finishing, 240+ for pre-polishing.
What abrasive belt sizes does it use?
See "Belt dimensions" in the technical table: typically from 75x2,000 mm to 150x2,500 mm.
Belts are consumable spare parts: Krollit supplies original Bernardo belts in various grit sizes to optimize finishing.
Is the belt speed adjustable?
Professional models offer Vario or multi-step speeds (typically 4-8 steps).
High speeds (>20 m/s) for stainless steel and finishing, low speeds (<10 m/s) for wood and soft materials to avoid burning.
Does it have integrated dust extraction?
Professional models offer dust extraction ports for grinding dust.
Dust extraction is essential for stainless steel (respirable dust) and for wood (fire risk from sparks). Check the connection diameter for connection to a centralized system.
How much does the machine weigh?
See "Weight" in the technical table: typically 50-200 kg for bench and pillar models.
Pillar models require floor mounting, while bench models are installed on a sturdy bench of adequate size.
