The Flott HBS 225 A band saw is a metal cutting band saw for professional use, with a cutting capacity of 275 mm / 10.83", a pole-changeable motor (kW), and a weight of 370 kg. Krollit has been an official Flott distributor since 2007.
- Power supply: 400 V three-phase
- Blade dimensions: 2720 x 27 x 0.9 mm
- Flywheel diameter: 300 mm
- Cutting speed: 40 – 80 m/min
- Cutting capacity: 275 mm / 10.83"
- Working height: 978 mm
Who uses the HBS 225 A band saw and for what
Mechanical workshops and metal fabrication shops use the HBS 225 A band saw for cutting profiles and bars in steel, aluminum, and cast iron, sectioning raw materials before turning or milling.
Its place in the Flott range
The Flott HBS 225 A band saw is part of the Flott metal cutting band saw range, distributed in Italy by Krollit since 2007. The Flott range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Flott catalog on Krollit or contact customer support for selection assistance.
Krollit logistics and support
Machine shipping in 5-9 working days (7 days for Southern Italy). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Customer assistance in Italian available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.
Who is the HBS 225 A band saw for?
The HBS 225 A band saw is recommended for the following professional profiles:
-
Mechanical workshops and metal fabrication shops: cutting steel profiles and bars with acceptable tolerance for subsequent processing.
-
Turners and industrial maintenance workers: sectioning raw materials before turning or milling.
Not suitable for: precision cutting of thin sheet metal (for thin sheets, consider hydraulic shears or metal circular saws).
Table, dimensions, and geometry
| Working height |
978 mm |
| Machine dimensions |
1150 x 1588 x 1477 mm |
| Weight |
370 kg |
Other specifications
| Flywheel diameter |
300 mm |
| Warranty |
12 months single shift use |
| Cutting speed |
40 – 80 m/min |
| Cutting capacity |
275 mm / 10.83" |
| Blade dimensions |
2720 x 27 x 0.9 mm |
| Power supply |
400 V three-phase |
| Motor power |
Pole-changeable (kW) |
Frequently Asked Questions
What can the HBS 225 A band saw cut?
Profiles, tubes, solid bars, and rolled steel, aluminum, and cast iron within the indicated section limits.
Cutting capacity is expressed in mm of maximum section for round, square, and rectangular profiles. For extra-hard materials, reduce the blade speed and use blades with appropriate teeth.
What type of blade does it require?
Bimetal blade for cutting steel, carbon steel blade for soft metals.
Krollit supplies original Bernardo blades with various tooth pitches to optimize cutting based on material type and thickness.
What cutting speed does it offer?
See the "Blade speed" data in the technical table: typically adjustable in 2-4 steps or continuously (Vario).
Low speeds (15-30 m/min) for alloy steels, high speeds (50-80 m/min) for light alloys and aluminum. Incorrect selection accelerates blade wear.
Does it have integrated cooling?
Professional models are equipped with a cooling pump with a collection tank and drip tray.
Cooling (with cutting oil or emulsion) prolongs blade life and improves cutting quality on hard materials. For dry cutting, use specific blades.
How much does it weigh and how is it installed?
See the "Weight" data in the technical table: industrial models weigh from 150 to over 400 kg.
Saws over 200 kg require adequate flooring and fastening. The machine must be positioned in clear space for managing long profiles.
