Bernardo CS 315 L is a professional metal chop saw, with a blade Ø 315 x 32 mm, speed 18 / 36 rpm, motor 0.75 / 1.3 kW, weight 210 kg. Krollit, official Bernardo distributor since 2007.
- Blade size: 315 x 32 mm
- Blade speed: 18 / 36 rpm
- Max. vice opening: 140 mm
- Working height: 960 mm
- Motor power (S1 100%): 0.75 / 1.3 kW
- Motor power (S6 40%): 1.1 / 1.8 kW
Who uses the CS 315 L and for what
Mechanical workshops and metal fabrication shops use the CS 315 L for straight and 45° cutting of tubes, profiles, and solids made of steel, stainless steel, aluminum, and plastic with a TiN coated HSS blade.
Its place in the Bernardo range
Bernardo CS 315 L is part of the Bernardo metal chop saw range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performance: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.
Krollit logistics and support
Machine shipping in 5-9 business days (7 days to Southern Italy). For spare parts and accessories, shipping 3-5 business days from Krollit warehouse. Italian customer support available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.
Who is the CS 315 L for?
The CS 315 L is recommended for the following professional profiles:
-
Mechanical workshops and metal fabrication shops: straight and 45° cutting of tubes, profiles, and solids made of steel, stainless steel, aluminum, and plastic.
-
Maintenance technicians and light metal fabrication shops: rapid series cutting of calibrated pieces with quick vice and longitudinal stop.
-
Precision cuts on hardened materials: for stainless steel and hard steels, reduce blade speed and use coolant.
Table, dimensions and geometry
| Working height |
960 mm |
| Machine dimensions (L x W x H) |
550 x 1000 x 1860 mm |
| Weight |
210 kg |
Motor and power supply
| Motor power (S1 100%) |
0.75 / 1.3 kW |
| Motor power (S6 40%) |
1.1 / 1.8 kW |
| Voltage |
400 V |
Other specifications
| Max. vice opening |
140 mm |
| Round |
Ø 55 mm |
| Square |
50 × 50 mm |
| Round |
Ø 100 mm |
| Square |
95 × 95 mm |
| Rectangular |
140 × 85 mm |
| Blade size |
315 x 32 mm |
| Blade speed |
18 / 36 rpm |
Frequently Asked Questions
What materials can the CS 315 L cut?
Common steels, stainless steel, aluminum, light metals, and plastic, on both solids and tubes and profiles.
For stainless steel and hardened steels, use the lowest speed and coolant device. For aluminum and light alloys, high speed is sufficient. TiN coated HSS blades offer longer life.
What is the maximum cutting capacity?
See "Cutting capacity" in the technical table: typically Ø 100 mm on tubes and Ø 55 mm on solids for Ø 315 mm models.
Capacity varies based on blade diameter and workpiece geometry. For inclined cuts at 45°, the capacity is reduced by approximately 30-40%.
Does it have multiple speeds?
Professional models offer 2 blade speeds (e.g., 18/36 rpm) to adapt to the material: low for stainless steel, high for common steels.
Dual speed is essential to optimize blade life and cutting efficiency. For cuts on single materials, a single speed may be sufficient.
Does it have a coolant device?
Professional models have a coolant device integrated into the base with a filter, to reduce overall dimensions.
Coolant extends blade life and improves cutting quality on hardened materials. It should be mixed with specific oil at 5-10% in water.
Is the head tiltable for angled cuts?
Yes, professional models allow angled cuts up to 45° right/left.
Tilting allows for precise cuts for angular carpentry joints. For series production with 45° cuts on both sides, it is advisable to use a longitudinal stop.
