Ask for a quote! and get the best tailor-made offer for you!

Write to us on WhatsApp: +39 0825-1494022 | Call Center

Professional Heating for Workshops and Warehouses

(75 products)
Riscaldamento

Reventon water heaters from €359, MVZ waste oil burners from €4,156, heated air curtains from €425, and TORNADO destratification fans from €280. 75 products for heating industrial warehouses, mechanical workshops, and artisan laboratories. Power from 10 to 120 kW, air flow up to 9,700 m³/h. Single-phase 230V and three-phase 400V power supply. Direct connection to centralized hot water systems or autonomous operation with waste oil. Brands: Reventon, Blow Air, MVZ. Official distributor since 2007.

View as

Frequently Asked Questions

What is a waste oil burner and how does it work?

A waste oil burner like the MVZ EMB20 burns used engine oil, hydraulic oil, or vegetable oil to produce heat. Adjustable power from 20 to 55 kW, consumption 2–5 liters/hour. It connects to hot air generators or boilers. Fuel cost: virtually zero for workshops that produce waste oil.

Which water fan heater should I choose for a warehouse?

It depends on the surface area. The Reventon HC20 (from €359, 20 kW) covers up to 200 m². For warehouses measuring 300–400 m², the HC45 (from €480) with 45 kW of power. For stables and agricultural sheds over 400 m², the Farmer OpenAir (from €2,072, up to 120 kW). All connect to existing hot water systems.

What is a destratification fan used for?

When warehouse doors remain open for loading/unloading goods or vehicle transit. The Reventon AERIS air curtain (from €425) creates a barrier that blocks cold outside air without obstructing passage. Hot water models for additional heating, air-only models for intermediate seasons. HUMMER series for doors up to 5 meters.

When is it advisable to install an air curtain?

When warehouse doors remain open for loading/unloading goods or vehicle transit. The Reventon AERIS air curtain (from €425) creates a barrier that blocks cold outside air without obstructing passage. Hot water models for additional heating, air-only models for intermediate seasons. HUMMER series for doors up to 5 meters.

Can I use waste engine oil to heat the workshop?

Yes, with a certified burner like the MVZ EMB20 (€4,156). It accepts engine oil, hydraulic oil, ATF, and vegetable oil. Average consumption is 2–5 l/h for a power output of 20–55 kW. The oil must be filtered before use. For workshops that change oil regularly, heating becomes fuel-cost free.

Water Heaters for Warehouses

Reventon HC series water heaters connect to existing boilers or heat pumps via a 3/4" hydraulic connection. Thermal power from 20 to 80 kW, air flow from 1,850 to 5,500 m³/h. The HC20 model (from €359) covers areas up to 200 m². The Farmer OpenAir (from €2,072) heats stables and agricultural buildings up to 600 m² with a minimum water temperature of 40°C. Each air heater includes a room thermostat and mounting bracket.

Waste Oil Burners

The MVZ EMB20 burner (€4,156) converts waste engine oil, hydraulic oil, and vegetable oil into heat for workshops and garages. Adjustable thermal power from 20 to 55 kW. Average consumption: 2–5 liters/hour of waste oil. It connects to existing hot air generators or boilers. For construction sites or workshops without a stable electrical grid, pair it with a Güde power generator for autonomous burner power.

Industrial Air Curtains

Reventon AERIS air curtains (from €425) create an air barrier at the entrances of warehouses and storage facilities. They block the entry of cold air, dust, and insects without hindering vehicle traffic. Hot water models (WN series) and ventilation-only models (C series). The industrial HUMMER series (from €1,341) covers doors up to 5 meters high with a flow rate of up to 10,000 m³/h.

Destratification Fans

Reventon TORNADO destratification fans (from €280 to €690) recover heat that rises to the ceiling and redistribute it at operator level. Flow rates from 3,600 to 9,700 m³/h. In warehouses with ceilings over 4 meters, the floor temperature can be 8–10°C lower than the ceiling. A destratification fan reduces this difference to 2–3°C and cuts heating costs by up to 30%. In workshops with metalworking, pair it with a metal dust extraction system to keep the air clean during forced circulation.

  • Reliable shipping

    DB Schenker / GLS / Fercam

  • Support 24

    Competent help desk

  • Resell used items

    Secure platform

  • 100% Secure Payments

    Klarna/Visa/Mastercard/PagoLight