The Bernardo pneumatic TM 24 P / R 1500 is a tapping machine for professional use, with a tapping capacity of M5 – M24, weight approx. 31 kg. Krollit, official Bernardo distributor since 2007.
- Tapping capacity: M5 – M24
- Spindle connection: GT 24
- Speed: 400 rpm
- Adjustable angle: 0° – 90°
- Max. operating radius: 1500 mm
- Air pressure: 6 – 8 bar
Who uses the pneumatic TM 24 P / R 1500 and for what
Mechanical workshops and metalworking shops use the pneumatic TM 24 P / R 1500 for internal threading of holes in metal with metric or inch taps, with repeated cycles thanks to the articulated arm.
Its place in the Bernardo range
The Bernardo pneumatic TM 24 P / R 1500 is part of the Bernardo tapping machine range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.
Krollit Logistics and Support
Machine shipment in 5-9 working days (7 days to the South). For spare parts and accessories, shipment in 3-5 working days from Krollit warehouse. Customer assistance in Italian available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.
Who is the pneumatic TM 24 P / R 1500 for?
The pneumatic TM 24 P / R 1500 is recommended for the following professional profiles:
-
Mechanical workshops and metalworking shops: internal threading of holes in metal with metric or inch taps.
-
Mechanical production laboratories: repeated tapping cycles with articulated arm and tool balancing.
Not suitable for: threading on materials other than metals (machine optimized for metals: other materials require dedicated tools).
Technical specifications
| Tapping capacity |
M5 – M24 |
| Spindle connection |
GT 24 |
| Speed |
400 rpm |
| Adjustable angle |
0° – 90° |
| Max. operating radius |
1500 mm |
| Air pressure |
6 – 8 bar |
| Weight |
approx. 31 kg |
| Max. material strength |
400 N/mm² |
Frequently asked questions
What tapping capacity does the pneumatic TM 24 P / R 1500 offer?
See "Tapping capacity" in the technical table: typically from M3 to M30.
The capacity refers to mild steel. On stainless steel or hard materials, reduce the maximum diameter by 20-30%.
What type of spindle does it mount?
See "Spindle connection" in the technical table.
Standard GT type spindles allow quick tool change via tap holders. Check compatibility with the included taps.
Is spindle speed adjustable?
Professional models offer continuous or multi-step speed adjustment.
Low speeds for large taps (>M20), high speeds for small taps and soft materials.
Does it have an articulated reaction arm?
Professional bench models have an articulated arm for quick workpiece positioning.
The articulated arm balances the weight of the head and reduces operator fatigue in repeated cycles.
What power supply does it require?
See "Voltage" in the table: typically 230 V single-phase for benchtop, 400 V three-phase for industrial.
Models with motors over 1.5 kW require a three-phase line. Check availability in the workshop.
