Laguna Bandsaw Blade 1784 mm Carbon FORCE Skip 4 TPI (var. 1) is a professional cutting tool available at Krollit, an official Laguna distributor since 2007.
- Length: 1784 mm
- Width: 6 mm
- Thickness: 0.65 mm
- Tooth Pitch: 4 TPI
- Recommended cutting height: 20–80 mm
- Compatibility: Record Power BS250 / SABRE 250
Who uses the 1784 mm Carbon FORCE Skip 4 TPI Bandsaw Blade (var. 1) and what for
Mechanical workshops and tool shops use the 1784 mm Carbon FORCE Skip 4 TPI Bandsaw Blade (var. 1) for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.
Its place in the Laguna range
Laguna Bandsaw Blade 1784 mm Carbon FORCE Skip 4 TPI (var. 1) is part of Laguna's range of cutting tools, distributed in Italy by Krollit since 2007. The Laguna range includes models of various categories and performance: to choose the right machine for your use case, you can consult the Laguna catalog on Krollit or contact customer support for assistance with selection.
Krollit Logistics and Support
Shipping 3-5 business days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who is the 1784 mm Carbon FORCE Skip 4 TPI Bandsaw Blade (var. 1) for
The 1784 mm carbon force skip 4 tpi bandsaw blade (var. 1) is recommended for the following professional profiles:
-
Mechanical workshops and tool shops: cutting and sharpening operations on compatible materials.
-
Users with compatible machines: replacement or original tool for the indicated machine.
-
Out-of-spec materials: check machinable material and tool geometry before use.
Technical specifications
| Length |
1784 mm |
| Width |
6 mm |
| Thickness |
0.65 mm |
| Tooth Pitch |
4 TPI |
| Recommended cutting height |
20–80 mm |
| Compatibility |
Record Power BS250 / SABRE 250 |
| Series |
Carbon FORCE |
| Toothing |
Skip |
| Recommended material |
Softwood |
Frequently Asked Questions
Which machine is it compatible with?
Check the title or technical sheet for the machine model or fitting indicated (e.g. DG 20 M, BSG 30 Pro, Bernardo HM 25).
Bernardo tools are original spare parts for the machines in the Krollit catalog. For doubts about compatibility, contact customer support specifying the machine's serial number.
CBN or diamond grinding wheel: which to choose?
CBN for sharpening drills and tools in HSS, hardened and case-hardened steels. Diamond ONLY for hard metal (carbide, HM).
CBN wheels cut "cold" without rounding on HSS, maintaining the abrasive edge for a long time. Diamond wheels should not be used on steel: the grains round off quickly, losing cutting ability.
What materials can it work on?
It depends on the geometry and material of the tool: HSS for common steels, HM/carbide for hard steels, CBN for HSS and case-hardened, diamond for hard metal.
Cobalt HM inserts (HSSE) work up to HRC 65. CBN wheels cut HRC 55-70 steels maintaining concentricity over time. For cast irons, consider green silicon carbide wheels.
How is it stored and maintained?
In a dry environment, protected from impact and oxidation. Grinding wheels should be periodically dressed with a diamond bar.
For abrasive wheels, proper storage and periodic dressing preserve the cutting geometry. For HM inserts, storage in the original box is sufficient.
Is it an original Bernardo spare part?
Yes, Krollit has been an official Bernardo distributor since 2007 and only supplies original tools from the manufacturer.
Compatible non-original tools may have out-of-spec tolerances and compromise machining precision. Shipping 3-5 business days.
