The Laguna Fusion 1 Table Saw with CMT blade and Riving Knife is a manual circular saw for professional use, with a 1450 W motor, weighing 110 kg. Krollit, official Laguna distributor since 2007.
- Power input: 1450 W
- Power output: 1100 W
- Blade: 250 x 30 mm
- Arbor speed: 3800 RPM
- Blade tilt: 0–45°
- Max cut at 90°: 79 mm
Who uses the Fusion 1 Table Saw with CMT blade and Riving Knife and for what
The Fusion 1 Table Saw with CMT blade and Riving Knife is a manual circular saw for professional use distributed by Krollit.
Its place in the Laguna range
The Laguna Fusion 1 Table Saw with CMT blade and Riving Knife is part of Laguna's range of manual circular saws, distributed in Italy by Krollit since 2007. The Laguna range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Laguna catalog on Krollit or contact customer support for selection assistance.
Krollit logistics and support
Machine shipping in 5-9 working days (7 days for Southern Italy). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Customer assistance in Italian available for technical documentation, product data sheets, and spare parts order management. Krollit has been an official distributor since 2007.
Who is the Fusion 1 Table Saw with CMT blade and Riving Knife for?
The Fusion 1 Table Saw with CMT blade and Riving Knife is recommended for the following professional profiles:
-
Mobile carpentry workshops and installation sites: portable straight cuts on boards and battens directly on site.
-
Carpenters and installers: installation work with manual tools for quick cuts on lightweight materials.
Not suitable for: stationary precision cuts on large panels (for series production, consider fixed table saws or panel saws).
Processing capacity
| Max cut at 90° |
79 mm |
| Max cut at 45° |
56 mm |
| Parallel capacity |
765 mm |
Spindle, tools and speed
| Blade |
250 x 30 mm |
| Arbor speed |
3800 RPM |
| Blade tilt |
0–45° |
Table, dimensions and geometry
| Cast iron table |
792 x 506 mm |
| Overall table |
792 x 1116 mm |
| Machine weight |
110 kg |
Other specifications
| Dust port |
100 mm |
| Power input |
1450 W |
| Power output |
1100 W |
Frequently asked questions
What is the cutting capacity of the Fusion 1 Table Saw with CMT blade and Riving Knife?
See "Cutting capacity" in the technical table for maximum thickness at 90° and 45°.
The capacity at 45° is always less than the cut at 90°. Check both values if you often make angled cuts.
Supported blade diameter?
See "Blade diameter" in the table: typically Ø 250-350 mm for professional models.
Larger blades offer greater cutting depth but require adequate motor power. Check the standard arbor bore.
Does it run on 230 V or 400 V?
See "Voltage" in the table: the MKS-351 model is available in 400 V three-phase.
Professional circular saws over 2.2 kW require a three-phase line. Check for power supply availability on site.
Does it have integrated dust extraction?
Professional saws have a dust extractor port with a typical diameter of Ø50-100 mm.
Dust extraction is essential to reduce breathable dust and maintain visibility in the cutting area.
Is it suitable for on-site use?
Yes, manual saws are designed for frequent relocation and on-site cutting of boards and battens.
For stationary production of large panels, consider fixed table saws with a sliding carriage.
