Bernardo spindle flange FLD-200/D6 is a machine tool accessory for professional use available at Krollit, official Bernardo distributor since 2007.
- Flange size: 200/D6
- Diameter: 200 mm
- Taper: 6
- A: 200 mm
- B: 36.5 mm
- Through bore: 103 mm
Who uses the FLD-200/D6 spindle flange and for what
Users who own a compatible machine install the FLD-200/D6 spindle flange as an original accessory to extend functionality or replace worn components.
Its place in the Bernardo range
Bernardo spindle flange FLD-200/D6 is part of the Bernardo machine tool accessories range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for assistance with selection.
Krollit logistics and support
Shipping within 3-5 working days from Krollit warehouse for spare parts and accessories. Italian customer support available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who is the FLD-200/D6 spindle flange for
The FLD-200/D6 spindle flange is recommended for the following professional profiles:
-
Users who own a compatible machine: original accessory to extend the functionality of the indicated machine.
-
Workshops with specific setup needs: component for special machining or increased precision.
-
Compatibility with machines of other brands or models: check machine model and specifications before purchase.
Technical specifications
| Flange size |
200/D6 |
| Diameter |
200 mm |
| Taper |
6 |
| A |
200 mm |
| B |
36.5 mm |
| Through bore |
103 mm |
Frequently asked questions
What is the FLD 200 - D6 spindle flange used for?
It is a flange for mounting a chuck on metal lathes, with a diameter of Ø 200 mm and D6 camlock.
It allows secure attachment of the chuck to the lathe spindle nose according to FLD standards (DIN 55027 drawbar camlock). The Ø 200 mm diameter corresponds to the nominal diameter of the compatible chuck.
What is the difference between FL and FLD series?
The FL (Ø flange) has an external camlock according to DIN 55029. The FLD has a central drawbar camlock according to DIN 55027 (quicker to disassemble).
This model is FLD: for maximum compatibility with the lathe, check the standard of the spindle nose. Most professional Bernardo metal lathes use the FLD attachment.
What does the D6 camlock indicate?
The D6 code (Camlock) indicates the quick-release system: the number (e.g., D3, D4, D5, D6, D8, D11, D15) identifies the standard size of the camlock.
For correct compatibility, check the camlock of your lathe: D3-D5 for small/medium lathes, D6-D8 for medium-large lathes, D11-D15 for heavy industrial lathes.
Is it an original Bernardo spare part?
Yes, Krollit has been an official Bernardo distributor since 2007 and exclusively supplies original flanges for Bernardo lathes and DIN compatible ones.
Original flanges comply with the machining tolerances required by the DIN standard to ensure concentricity and balancing of the chuck. Do not use non-original flanges for precision machining.
How is the flange mounted on the lathe?
Mounting requires disassembling the existing chuck, thoroughly cleaning the lathe spindle nose, applying a light layer of oil, and tightening with the torque indicated in the manual.
For lathes with a Camlock system (DLD), the cams should be closed by hand up to the reference mark (usually a notch or line); do not force with tools. Krollit provides technical documentation and telephone support for assembly.
