The Flott TS 300 SD P is a professional grinder, weighing 40 kg. Krollit has been an official Flott distributor since 2007.
- Wheel size: 300 × 40 × 51 mm
- Speed: 1250 rpm
- Extraction pre-arrangement: Ø 42 mm
- Machine dimensions: 350 × 530 × 340 mm
- Weight: 40 kg
- Wheels included: 1 coarse grit / 1 fine grit
Who uses the TS 300 SD P and for what
Mechanical workshops and carpentry shops use the TS 300 SD P for grinding and satin finishing stainless steel, aluminum, and alloys, removing burrs and finishing surfaces.
Its place in the Flott range
The Flott TS 300 SD P is part of the Flott grinder range, distributed in Italy by Krollit since 2007. The Flott range includes models of various categories and performances: to choose the machine suitable for your use case, you can consult the Flott catalog on Krollit or contact customer support for selection assistance.
Krollit Logistics and Support
Machine shipping in 5-9 working days (7 days to Southern Italy). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Customer support in Italian available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.
Who is the TS 300 SD P for?
The TS 300 SD P is recommended for the following professional profiles:
-
Mechanical workshops for metal finishing: grinding and satin finishing stainless steel, aluminum, and alloys.
-
Carpentry shops and production laboratories: burr removal, cutting deburring, and surface finishing.
Not suitable for: mirror polishing chrome (dedicated polishing machines with abrasive pastes are needed for final chrome finishes).
Table, dimensions and geometry
| Wheel size |
300 × 40 × 51 mm |
| Machine dimensions |
350 × 530 × 340 mm |
| Weight |
40 kg |
| Packaging dimensions |
On pallet |
Other specifications
| Extraction pre-arrangement |
Ø 42 mm |
| Wheels included |
1 coarse grit / 1 fine grit |
| Electrical requirement |
CEE 16 A |
| Warranty |
12 months |
| Item codes |
317.764 – 317.776 – 317.779 |
| Available versions |
Basic / with stand / with integrated extraction + brake + emergency stop |
| Speed |
1250 rpm |
| Motor |
Three-phase 400 V – 2.2 kW – S2 30 min |
Frequently Asked Questions
What can the TS 300 SD P grind?
Stainless steel, aluminum, metal alloys and (in some models) even wood with suitable abrasive belts.
A specific belt grit is used for each material: 60-80 for roughing, 120-180 for finishing, 240+ for pre-polishing.
What size abrasive belt does it use?
See "Belt dimensions" in the technical table: typically from 75x2,000 mm to 150x2,500 mm.
Belts are consumable spare parts: Krollit supplies original Bernardo belts in various grit sizes to optimize the finish.
Is the belt speed adjustable?
Professional models offer Vario or multi-step speeds (typically 4-8 steps).
High speeds (>20 m/s) for stainless steel and finishing, low speeds (<10 m/s) for wood and soft materials to avoid burning.
Does it have integrated extraction?
Professional models offer an extraction port for grinding dust.
Extraction is essential for stainless steel (respirable dust) and for wood (fire risk from sparks). Check the connection diameter for connection to a centralized system.
How much does the machine weigh?
See "Weight" in the technical table: typically 50-200 kg for bench and pedestal models.
Pedestal models require floor mounting; bench models are installed on a sturdy bench of adequate size.
