The Krollit Bandsaw Blade 2946mm - 10 x 0.65mm 6Tpi is a professional cutting tool available from Krollit, an official Krollit distributor since 2007.
- Tooth shape: Regular
- Recommended for: hardwood / softwood
- Cutting height: 3-20 mm
Who uses the Krollit Bandsaw Blade 2946mm - 10 x 0.65mm 6Tpi and for what purpose?
Mechanical workshops and tool laboratories use the Krollit Bandsaw Blade 2946mm - 10 x 0.65mm 6Tpi for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.
Its place in the Krollit range
The Krollit Bandsaw Blade 2946mm - 10 x 0.65mm 6Tpi is part of the Krollit range of cutting tools, distributed in Italy by Krollit since 2007. The Krollit range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Krollit catalog on Krollit or contact customer support for selection assistance.
Krollit Logistics and Support
Shipping within 3-5 business days from Krollit warehouse for spare parts and accessories. Italian customer support available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who is the Bandsaw Blade 2946mm - 10 x 0.65mm 6Tpi for?
The Bandsaw Blade 2946mm - 10 x 0.65mm 6Tpi is recommended for the following professional profiles:
-
Mechanical workshops and tool laboratories: cutting and sharpening operations on compatible materials.
-
Users with compatible machines: replacement part or original tool for the specified machine.
-
Out-of-spec materials: verify workable material and tool geometry before use.
Frequently Asked Questions
Which bandsaw is this blade compatible with?
It is specific for the Laguna 14|12 bandsaw (with a blade length of 2946 mm).
Check the blade length (closed loop length) of your saw before purchasing. The length is indicated in the machine manual or welded on the existing blade.
What is 6 TPI grit used for?
Suitable for general-purpose cutting on dry and hard wood, thicknesses 10-25 mm.
General rule: Low TPI (2-4) for aggressive and fast cuts; High TPI (6-14) for clean but slower finishes. The choice depends on the material thickness.
What can be cut with a 10 mm width?
It is suitable for medium curved cuts with a radius up to 65 mm.
The width determines the minimum cutting radius: for wood with a width of 10 mm, the approximate radius is 50 mm.
When should the blade be replaced?
A bandsaw blade should be replaced when cutting becomes slower, shows burning, or requires more pressure. Bandsaw blades are not sharpened; they are replaced.
Wear indicators: burning of wood during cutting, deviation of the cutting line (the blade "wanders"), altered noise, presence of smoke. Average lifespan: 40-100 hours of cutting for standard blades.
How to tension it correctly?
Follow the saw manufacturer's instructions: typical tension 12,000-25,000 PSI for wood blades. Incorrect tension is the main cause of premature breakage.
Blades that are too loose cut crooked and break due to fatigue; blades that are too tight break due to mechanical tension. Tension should be checked cold after 5 minutes of work: if the noise changes significantly, recheck.
