The Krollit Bandsaw Blade 2946mm - 8 x 0.65mm 10TPI is a professional-grade cutting tool available from Krollit, an official Krollit distributor since 2007.
- Tooth shape: Regular
- Recommended for: hardwood/softwood
- Cutting height: 3-20 mm
Who uses the 2946mm - 8 x 0.65mm 10TPI Bandsaw Blade and for what?
Mechanical workshops and tool shops use the 2946mm - 8 x 0.65mm 10TPI Bandsaw Blade for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.
Its place in the Krollit range
The Krollit Bandsaw Blade 2946mm - 8 x 0.65mm 10TPI is part of the Krollit cutting tool range, distributed in Italy by Krollit since 2007. The Krollit range includes models of various categories and performance: to choose the right machine for your use case, you can consult the Krollit catalog on Krollit or contact customer support for selection assistance.
Krollit logistics and support
Shipping within 3-5 working days from Krollit warehouse for spare parts and accessories. Customer support in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who is the 2946mm - 8 x 0.65mm 10TPI Bandsaw Blade for?
The 2946mm - 8 x 0.65mm 10TPI bandsaw blade is recommended for the following professional profiles:
-
Mechanical workshops and tool shops: cutting and sharpening operations on compatible materials.
-
Users with compatible machines: replacement or original tool for the indicated machine.
-
Out-of-spec materials: verify workable material and tool geometry before use.
Frequently Asked Questions
Which bandsaw is this blade compatible with?
It is specific for the Laguna 14|12 bandsaw (with a blade length of 2946 mm).
Verify the blade length (closed band length) of your saw before purchasing. The length is indicated in the machine manual or welded onto the existing blade.
What is 10 TPI grit used for?
Suitable for fine and precision cutting on thin wood, plastic, and non-ferrous metals.
General rule: low TPI (2-4) for aggressive and fast cuts; high TPI (6-14) for clean but slower finishes. The choice depends on the material thickness.
What can be cut with an 8 mm width?
It is suitable for medium curved cuts with a radius up to 65 mm.
The width determines the minimum cutting radius: for wood with an 8 mm width, the approximate radius is 40 mm.
When should the blade be replaced?
A bandsaw blade should be replaced when cutting becomes slower, burning occurs, or more pressure is required. Bandsaw blades are not sharpened; they are replaced.
Indicators of wear: wood burning during cutting, deviation of the cutting line (the blade "wanders"), altered noise, presence of smoke. Average lifespan: 40-100 hours of cutting for standard blades.
How to tension it correctly?
Follow the saw manufacturer's instructions: typical tension 12,000-25,000 PSI for wood blades. Incorrect tension is the main cause of premature breakage.
Blades that are too loose cut crooked and break due to fatigue; blades that are too tight break due to mechanical tension. Tension should be checked cold after 5 minutes of operation: if the noise changes significantly, recheck.
