Krollit Bandsaw Blade 3670mm - 8 x 0.65mm 10TPI is a cutting tool for professional use available at Krollit, official Krollit distributor since 2007.
- Vendor: Krollit
- Model: Bandsaw Blade 3670mm - 8 x 0.65mm 10TPI
- Official Bernardo distributor since 2007
- Shipping from Krollit warehouse
Who uses the Bandsaw Blade 3670mm - 8 x 0.65mm 10TPI and for what
Mechanical workshops and tool labs use the Bandsaw Blade 3670mm - 8 x 0.65mm 10TPI for cutting, drilling or sharpening operations on materials compatible with the tool's geometry.
Its place in the Krollit range
Krollit Bandsaw Blade 3670mm - 8 x 0.65mm 10TPI is part of the Krollit cutting tools range, distributed in Italy by Krollit since 2007. The Krollit range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Krollit catalog on Krollit or contact customer service for support in selection.
Krollit logistics and support
Shipping 3-5 business days from Krollit warehouse for spare parts and accessories. Italian customer service available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who is the Bandsaw Blade 3670mm - 8 x 0.65mm 10TPI for
The bandsaw blade 3670mm - 8 x 0.65mm 10TPI is recommended for the following professional profiles:
-
Mechanical workshops and tool labs: cutting and sharpening operations on compatible materials.
-
Users with compatible machine: replacement or original tool for the indicated machine.
-
Out-of-spec materials: check machinable material and tool geometry before use.
Frequently asked questions
Which bandsaw is this blade compatible with?
It is specific for Laguna 18|BX bandsaws (with 3670 mm blade travel).
Check the blade travel (closed band length) of your saw before purchasing. The length is indicated in the machine manual or welded on the existing blade.
What is 10 TPI grit used for?
Suitable for fine and precise cuts on thin wood, plastic, non-ferrous metals.
General rule: low TPI (2-4) for aggressive and fast cuts; high TPI (6-14) for clean but slower finishes. The choice depends on the material thickness.
What can be cut with an 8 mm width?
It is suitable for medium curved cuts with a radius up to 65 mm.
The width determines the minimum cutting radius: for wood with an 8 mm width, the approximate radius is 40 mm.
When should the blade be replaced?
A bandsaw blade should be replaced when cutting becomes slower, shows burning, or requires more pressure. Bandsaw blades are not sharpened: they are replaced.
Indicators of wear: wood burning during cutting, deviation of the cutting line (the blade "runs away"), altered noise, presence of smoke. Average service life: 40-100 cutting hours for standard blades.
How to tension it correctly?
Follow the saw manufacturer's instructions: typical tension 12,000-25,000 PSI for wood blades. Incorrect tension is the main cause of premature breakage.
Blades that are too loose cut crooked and break due to fatigue; too tight break due to mechanical tension. Tension should be checked cold after 5 minutes of work: if the noise changes significantly, recheck.
