The Krollit 2946mm - 19 x 0.8mm 2Tpi bandsaw blade is a cutting tool for professional use, available from Krollit, an official Krollit distributor since 2007.
- Vendor: Krollit
- Model: 2946mm - 19 x 0.8mm 2Tpi bandsaw blade
- Official Bernardo distributor since 2007
- Shipping from Krollit warehouse
Who uses the 2946mm - 19 x 0.8mm 2Tpi bandsaw blade and for what
Mechanical workshops and tool laboratories use the 2946mm - 19 x 0.8mm 2Tpi bandsaw blade for cutting, drilling, or sharpening operations on materials compatible with the tool's geometry.
Its place in the Krollit range
The Krollit 2946mm - 19 x 0.8mm 2Tpi bandsaw blade is part of the Krollit cutting tools range, distributed in Italy by Krollit since 2007. The Krollit range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Krollit catalog on Krollit or contact customer support for selection assistance.
Krollit Logistics and Support
Shipping 3-5 business days from Krollit warehouse for spare parts and accessories. Customer service in Italian available for technical documentation and compatibility verification with the reference machine. Krollit has been an official distributor since 2007.
Who is the 2946mm - 19 x 0.8mm 2Tpi bandsaw blade for
The 2946mm - 19 x 0.8mm 2Tpi bandsaw blade is recommended for the following professional profiles:
-
Mechanical workshops and tool laboratories: cutting and sharpening operations on compatible materials.
-
Users with compatible machines: replacement or original tool for the indicated machine.
-
Out-of-specification materials: verify workable material and tool geometry before use.
Frequently Asked Questions
Which bandsaw is this blade compatible with?
It is specific for the Laguna 14|12 bandsaw (with a 2946 mm blade length).
Check the blade length (closed band length) of your saw before purchasing. The length is indicated in the machine manual or welded onto the existing blade.
What is 2 TPI grit used for?
Suitable for rough cuts on thick materials (25-100 mm), green wood, and preliminary turning.
General rule: low TPI (2-4) for aggressive and fast cuts; high TPI (6-14) for clean but slower finishes. The choice depends on the material thickness.
What can be cut with a 19 mm width?
It is suitable for mixed straight and curved cuts with a radius up to 100 mm.
The width determines the minimum cutting radius: for wood with a 19 mm width, the approximate radius is 95 mm.
When should the blade be replaced?
A bandsaw blade should be replaced when cutting becomes slower, shows burning, or requires more pressure. Bandsaw blades are not sharpened: they are replaced.
Wear indicators: wood burning during cutting, deviation of the cutting line (the blade "wanders"), altered noise, presence of smoke. Average lifespan: 40-100 cutting hours for standard blades.
How to tension it correctly?
Follow the saw manufacturer's instructions: typical tension 12,000-25,000 PSI for wood blades. Incorrect tension is the main cause of premature breakage.
Blades that are too loose cut crookedly and break due to fatigue; too tight blades break due to mechanical tension. Tension should be checked cold after 5 minutes of work: if the noise changes significantly, recheck.
