Bernardo Cloth Abrasive Belt 2000 x 50 mm Grit 100 – 10 pieces
The 2000 x 50 mm grit 100 cloth abrasive belt is designed for intermediate sanding and controlled finishing on metal, wood, and technical materials. The reinforced cloth backing ensures high mechanical resistance, long life, and stability even during intensive use on professional sanders.
Grit 100 is suitable for leveling surfaces after roughing, removing machining marks, and preparing the material for final finishing stages. The 2000 x 50 mm dimensions ensure compatibility with numerous workshop and laboratory belt sanders. The 10-piece pack is a practical choice for continuous use in carpentry, joinery, and industrial processes.
Main Specifications
High-strength cloth abrasive belt
Dimensions 2000 x 50 mm
Grit 100 for intermediate sanding and finishing
Suitable for metal, wood, and composite surfaces
High durability in professional use
Smooth running on belt sanders
Pack of 10 pieces
Technical Specifications
| Specification |
Value |
| Product type |
Cloth abrasive belt |
| Dimensions |
2000 x 50 mm |
| Grit |
100 |
| Backing material |
Reinforced abrasive cloth |
| Use |
Intermediate sanding and finishing |
| Compatibility |
Belt sanders |
| Pack quantity |
10 pieces |
Standard equipment
10 cloth abrasive belts 2000 x 50 mm
Grit 100 ready for use
Logistics
Bernardo Shipping: 5–9 business days (7 days in the South). Original spare parts available with 3–5 business day shipping. Italian customer support available.
Frequently Asked Questions
Cloth belt vs paper belt: when to choose cloth?
Cloth belts are more flexible, tear-resistant, and tolerant to bending — suitable for curved surfaces, edges, pipes, and metalworking. Paper belts are stiffer and suitable for flat wood and plastic surfaces. For metal, cloth is always preferable: it withstands the heat generated by friction better and does not tear with metal chips.
When is grit 80 used and on which materials?
Grit 80 is suitable for sanding metals and hardwoods: surface preparation for finishing, blending welded edges. Typical materials: steel, stainless steel, aluminum, hard solid wood. For stainless steel, use specific belts not contaminated with steel — iron residues cause oxidation stains. The electrocorundum (Al₂O₃) abrasive cloth in this series maintains its cutting ability longer than paper abrasive of the same grit.
Can the 2000 x 50 mm roll belt be cut to size?
Yes — cloth roll belts can be cut with robust scissors or a utility knife. The length from the roll (50 m) allows you to obtain belts of any length. Always cut perpendicular to the belt's running direction to avoid edge detachment during use.
How to prevent belt clogging on aluminum and plastic?
Aluminum: use belts with a semi-open coat (marked "semi-open coat") and, if possible, apply paraffin wax to the belt to reduce aluminum adhesion. Plastic: reduce speed and work intermittently to avoid overheating the material. A clogged belt does not abrade but only generates heat — it should be cleaned with a wire brush or replaced.
Delivery times?
Original spare parts available with 3–5 business day shipping. Italian customer support available.
