Record Power BENCH PILLAR DRILL DP25B is a professional pillar drill with speeds of 500, 890, 1400, 1900, 2500 rpm, a 1/3 HP motor, and a weight of 27 kg. Krollit, official Record Power distributor since 2007.
- Machine type: Bench pillar drill
- Throat depth: 127 mm
- Spindle travel (depth of feed): 60 mm
- Spindle-to-table distance: 235 mm
- Spindle-to-base distance: 355 mm
- Spindle speed: 500, 890, 1400, 1900, 2500 rpm
Who uses the BENCH PILLAR DRILL DP25B and for what
Mechanical workshops and carpentry shops use the BENCH PILLAR DRILL DP25B for precision drilling on steel and cast iron, threading with a tapping chuck, and repetitive work on pieces of various sizes.
Its place in the Record Power range
The Record Power BENCH PILLAR DRILL DP25B is part of the Record Power range of pillar drills, distributed in Italy by Krollit since 2007. The Record Power range includes models of various categories and performance levels: to choose the machine suitable for your use case, you can consult the Record Power catalog on Krollit or contact customer support for selection assistance.
Krollit logistics and support
Machine shipping in 5-9 business days (7 days to the South of Italy). For spare parts and accessories, shipping in 3-5 business days from Krollit warehouse. Customer support in Italian available for technical documentation, product sheets, and spare part order management. Krollit has been an official distributor since 2007.
Who is the BENCH PILLAR DRILL DP25B for
The bench pillar drill dp25b is recommended for the following professional profiles:
-
Mechanical workshops and carpentry: precision drilling on steel and cast iron, threading with a tapping chuck.
-
Maintenance personnel and repair shops: repetitive drilling work on pieces of various sizes.
-
Occasional hobby use: professional machine: for home use, consider compact bench models.
Working capacity
| Throat depth |
127 mm |
| Spindle travel (depth of feed) |
60 mm |
| Chuck capacity |
13 mm |
Spindle, tools, and speed
| Spindle-to-table distance |
235 mm |
| Spindle-to-base distance |
355 mm |
| Spindle speed |
500, 890, 1400, 1900, 2500 rpm |
| Spindle type |
Morse Taper 2 (MT2) |
Motor and power supply
| Motor power |
1/3 HP |
| Sound power |
< 85 dB(A) |
| Sound pressure |
< 85 dB(A) |
Other specifications
| Machine type |
Bench pillar drill |
| Weight |
27 kg |
| Machine dimensions |
850 (H) x 210 (W) x 380 (D) mm |
Frequently Asked Questions
What is the drilling capacity of the BENCH PILLAR DRILL DP25B?
See the "Drilling capacity" data in the machine's technical table.
The capacity refers to standard unhardened steel. For harder materials or alloys, the actual capacity may be lower: reduce speed and feed to avoid stressing the spindle and tools.
How do I adjust the spindle speed?
Via mechanical belt or gear change in step models, via inverter or variator in Vario models.
Vario models allow continuous adjustment, while step models require moving the belt to different pulleys. Correct speed selection based on drill bit diameter and material extends tool life.
What spindle taper and type of tools does it support?
See "Spindle taper" in the technical table: typically MT 2, MT 3, or MT 4 depending on the model.
MT (Morse Taper) tapers are international standards, and accessories (arbors, keyless chucks, reducers) are commonly available on the market. Krollit supplies original Bernardo accessories.
Does the drill allow threading with a tapping chuck?
Only models with standard right/left rotation allow threading with automatic tap release.
Check the "Right/left rotation" or "Tapping" specification: drills without mechanical reversal are not suitable for repetitive tapping.
What is the weight of the machine and what installation does it require?
The weight varies from about 25 kg (compact bench models) to over 250 kg (Profi industrial models).
Bench models are installed on a sturdy bench, while pillar or radial models require floor fixing with expansion anchors for stability during drilling.
