The Record Power COLONNA BANCO DP58B is a professional bench pillar drill, with speeds of 180 – 2740 rpm (12 speeds), weighing 55 kg. Krollit, official Record Power distributor since 2007.
- Machine Type: Bench Pillar Drill
- Throat Depth: 165 mm
- Spindle Travel: 80 mm
- Spindle to Table Distance: 371 mm
- Spindle to Base Distance: 548 mm
- Spindle Speed: 180 – 2740 rpm (12 speeds)
Who uses the COLONNA BANCO DP58B and for what purpose
Mechanical workshops and metalworking shops use the COLONNA BANCO DP58B for precision drilling on steel and cast iron, tapping with a tap, and repetitive work on pieces of various sizes.
Its place in the Record Power range
The Record Power COLONNA BANCO DP58B fits into the Record Power pillar drill range, distributed in Italy by Krollit since 2007. The Record Power range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Record Power catalogue on Krollit or contact customer support for assistance with selection.
Krollit Logistics and Support
Machine shipping in 5-9 working days (7 days to the South). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Customer assistance in Italian available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.
Who is the COLONNA BANCO DP58B for?
The COLONNA BANCO DP58B is recommended for the following professional profiles:
-
Mechanical workshops and metalworking shops: precision drilling on steel and cast iron, tapping with a tap.
-
Maintenance personnel and repair laboratories: repetitive drilling work on pieces of various sizes.
-
Occasional hobby use: professional machine: for domestic use, consider compact bench models.
Working Capacity
| Throat Depth |
165 mm |
| Spindle Travel |
80 mm |
| Chuck Capacity |
16 mm |
Spindle, Tools, and Speed
| Spindle to Table Distance |
371 mm |
| Spindle to Base Distance |
548 mm |
| Spindle Speed |
180 – 2740 rpm (12 speeds) |
| Spindle Taper |
Morse 2 (CM2) |
Motor and Power Supply
| Current Consumption |
2.6 A |
| Sound Power Level |
<83 dB(A) |
| Sound Pressure Level |
<83 dB(A) |
| Motor |
230 V / 50 Hz / 560 W input |
Other Specifications
| Machine Type |
Bench Pillar Drill |
| Drill Vice |
Not included |
| Weight |
55 kg |
| Frame Material |
Cast iron and steel |
Frequently Asked Questions
What is the drilling capacity of the COLONNA BANCO DP58B?
See the "Drilling Capacity" data in the machine's technical table.
The capacity refers to standard unhardened steel. On harder materials or alloyed steels, the actual capacity may be lower: reduce speed and feed to avoid stressing the spindle and tools.
How is the spindle speed adjusted?
Through mechanical belt or gear changes in stepped models, and through an inverter or variator in Vario models.
Vario models allow continuous adjustment, while stepped models require moving the belt to different pulleys. Correct speed selection based on drill bit diameter and material extends tool life.
What spindle taper and type of tools does it support?
See "Spindle Taper" in the technical table: typically MT 2, MT 3 or MT 4 depending on the model.
MT (Morse Taper) fittings are international standards, and accessories (arbors, keyless chucks, reducers) are commonly available on the market. Krollit supplies original Bernardo accessories.
Does the drill allow tapping with a tap?
Only models with standard right/left rotation allow tapping with automatic tap release.
Check the "Right/Left Rotation" or "Tapping" specification: drills without mechanical reversal are not suitable for repetitive tapping.
What is the weight of the machine and what installation does it require?
Weight varies from approximately 25 kg (compact bench models) to over 250 kg (Profi industrial models).
Bench models are installed on a sturdy workbench, while pillar or radial models require floor fixing with expansion anchors for stability during drilling.
