The Record Power COLUMN BENCH DP58P is a professional pillar drill, with an 800 W motor and weighing 67 kg. Krollit has been an official Record Power distributor since 2007.
- Machine type: Pillar drill
- Throat Depth: 190 mm
- Depth of Feed: 80 mm
- Spindle-table distance: 668 mm
- Spindle-base distance: 1154 mm
- Motor: 230 V / 50 Hz
Who uses the COLUMN BENCH DP58P and for what
Mechanical workshops and metalworking shops use the COLUMN BENCH DP58P for precision drilling on steel and cast iron, tapping with a tap, and repetitive work on pieces of various sizes.
Its place in the Record Power range
The Record Power COLUMN BENCH DP58P is part of the Record Power pillar drill range, distributed in Italy by Krollit since 2007. The Record Power range includes models of various categories and performances: to choose the right machine for your use case, you can consult the Record Power catalog on Krollit or contact customer support for selection assistance.
Krollit logistics and support
Machine shipping in 5-9 working days (7 days to the South). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Customer support in Italian is available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.
Who the COLUMN BENCH DP58P is for
The column bench dp58p is recommended for the following professional profiles:
-
Mechanical workshops and metalworking: precision drilling on steel and cast iron, tapping with a tap.
-
Maintenance and repair shops: repetitive drilling work on pieces of various sizes.
-
Occasional hobby use: professional machine: for home use, consider compact benchtop models.
Spindle, tools and speed
| Spindle-table distance |
668 mm |
| Spindle-base distance |
1154 mm |
| Spindle |
16 mm – CM2 (2 Morse Taper) |
| Number of speeds |
12 |
| Speed |
180–2740 rpm |
Motor and power supply
| Motor |
230 V / 50 Hz |
| Power consumption |
800 W |
| Current consumption |
3.6 A |
| Sound power |
<83 dB(A) |
| Sound pressure |
<83 dB(A) |
Other specifications
| Machine type |
Pillar drill |
| Throat Depth |
190 mm |
| Depth of Feed |
80 mm |
| Weight |
67 kg |
| Construction |
Steel + cast iron |
Frequently asked questions
What is the drilling capacity of the COLUMN BENCH DP58P?
See the "Drilling capacity" data in the machine's technical table.
The capacity refers to standard unhardened steel. On harder materials or alloyed metals, the actual capacity may be lower: reduce speed and feed to avoid stressing the spindle and tools.
How is the spindle speed adjusted?
Via mechanical belt or gear change in stepped models, via inverter or variator in Vario models.
Vario models allow continuous adjustment, while stepped models require moving the belt to different pulleys. Correct speed selection based on drill bit diameter and material extends tool life.
What spindle taper and type of tools does it support?
See "Spindle taper" in the technical table: typically MT 2, MT 3 or MT 4 depending on the model.
MT (Morse Taper) tapers are international standards and accessories (arbors, keyless chucks, reductions) are commonly available on the market. Krollit supplies original Bernardo accessories.
Does the drill allow tapping with a tap?
Only models with standard right/left rotation allow tapping with automatic tap release.
Check the "Right/left rotation" or "Tapping" specification: drills without mechanical reversal are not suitable for repetitive tapping.
What is the weight of the machine and what installation does it require?
Weight varies from approximately 25 kg (compact benchtop) to over 250 kg (industrial Profi models).
Benchtop models are installed on a sturdy bench, while pillar or radial models require floor mounting with expansion anchors for stability during drilling.
