The Bernardo ZSM 560 is a professional calibrating sander with a sanding width of 560 mm (1120 mm without support), a working thickness of 5 – 125 mm, a 1.5 kW (2.0 HP) motor, and a weight of approximately 110 kg. Krollit, official Bernardo distributor since 2007.
- Max. sanding width: 560 mm (1120 mm without support)
- Min. workpiece length: 60 mm
- Min.–max. workpiece thickness: 5 – 125 mm
- Table size: 500 × 580 mm
- Table extensions (2×): 245 × 580 mm
- Working height: 695 mm
Who uses the ZSM 560 and for what
Professional woodworking shops and furniture manufacturers use the ZSM 560 for calibrating solid wood, MDF, and plywood panels, standardizing the thickness before finishing.
Its place in the Bernardo range
The Bernardo ZSM 560 fits into the Bernardo calibrating sander range, distributed in Italy by Krollit since 2007. The Bernardo range includes models of various categories and performance levels: to choose the right machine for your use case, you can consult the Bernardo catalog on Krollit or contact customer support for selection assistance.
Krollit logistics and support
Machine shipping in 5-9 working days (7 days to the South). For spare parts and accessories, shipping in 3-5 working days from Krollit warehouse. Customer support in Italian available for technical documentation, product sheets, and spare parts order management. Krollit has been an official distributor since 2007.
Who is the ZSM 560 for
The ZSM 560 is recommended for the following professional profiles:
-
Professional woodworking shops and furniture manufacturers: calibrating solid wood, MDF, and plywood panels to standardize thickness.
-
Restoration and custom production workshops: calibrated sanding of large surfaces before finishing.
Not suitable for: working with metals or plastics (machine dedicated to wood: specific sanders are needed for other materials).
Table, dimensions and geometry
| Min. workpiece length |
60 mm |
| Table size |
500 × 580 mm |
| Working height |
695 mm |
| Machine dimensions (L × W × H) |
1100 × 1065 × 1170 mm |
| Weight |
approx. 110 kg |
Other specifications
| Table extensions (2×) |
245 × 580 mm |
| Sanding drum |
Ø130 × 565 mm |
| Belt feed |
0.5 – 3 m/min (variable) |
| Max. sanding width |
560 mm (1120 mm without support) |
| Min.–max. workpiece thickness |
5 – 125 mm |
| Shaft speed |
1420 rpm |
| Dust extraction port |
Ø100 mm |
| Motor power |
1.5 kW (2.0 HP) |
| Voltage |
230 V / 400V |
Frequently Asked Questions
What sanding width does it offer?
See "Max. sanding width" in the technical table.
For panels wider than the nominal capacity, multi-pass sanding with precise alignment is required.
What minimum and maximum thickness does it work?
See "Min.–max. workpiece thickness" in the technical table.
For thin workpieces, the use of anti-vibration supports is recommended to maintain uniform pressure.
Does it have multiple sanding stations?
Professional models offer 2-3 stations with different grits for roughing and finishing in a single pass.
Multiple stations reduce processing times and standardize finish quality.
What power supply does it require?
Typically 400 V three-phase for professional models.
Check the capacity of the electrical line and the presence of a dedicated residual current device.
How much does the machine weigh?
See "Weight" in the technical table: industrial models weigh from 500 to over 1500 kg.
Machines over 800 kg require industrial flooring and forklift handling during installation.
